可切削加工陶瓷材料研究进展

无机材料学报

可切削加工陶瓷材料研究进展

李永利; 乔冠军; 金志浩

西安交通大学材料科学与工程学院, 西安 710049

收稿日期:2000-04-17 修回日期:2000-05-29 出版日期:2001-03-20 网络出版日期:2001-03-20

Progress in Research on Machinable Ceramic Composites

LI Yong-Li; QIAO Guan-Jun; JIN Zhi-Hao

School of Material Science and Engineering; Xi an Jiaotong University; Xi an 710049; China

Received:2000-04-17 Revised:2000-05-29 Published:2001-03-20 Online:2001-03-20

摘要/Abstract

摘要： 从玻璃陶瓷、氧化物陶瓷和非氧化物陶瓷三个方面比较全面地回顾了可加工陶瓷的研究进展，介绍了其制备工艺、可加工机制及强韧化机制，评述了国内外研究现状．并对可加工陶瓷研究的发展趋势提出了作者的观点．

关键词: 可加工, 玻璃陶瓷, 氧化物陶瓷, 非氧化物陶瓷, 陶瓷, 评述

Abstract: This paper reviews the research process about machinable ceramics from three parts of glass-ceramics, oxide-ceramics and nonoxide-ceramics in detail, discusses its fabrication procedure and mechanism of machinability, and also gives some trends in this field of research.

Key words: machinable ceramics, composites, glass-ceramics, oxide-ceramics, nonoxide-ceramics

中图分类号:

TQ050

李永利,乔冠军,金志浩. 可切削加工陶瓷材料研究进展[J]. 无机材料学报.

LI Yong-Li,QIAO Guan-Jun,JIN Zhi-Hao. Progress in Research on Machinable Ceramic Composites[J]. Journal of Inorganic Materials.

参考文献

[1] Lawn Brian R, Padture Nitin P, et al. Science, 1994, 263: 1114--1116.
[2] 高宏，田丁, 王修慧, 等. 大连铁道学院学报，1997, 18 (4): 74--77.
[3] Beall G H. Microstructure Developed in Crystallized Glass-ceramics, Advance in Nucleation and Crystal in Glasses, 1971.
[4] Grossman David G. J. Am. Ceram. Soc., 1972, 55: 446--449.
[5] 乔冠军. 博士学位论文. 西安: 西安交通大学，1995.
[6] Kawai C. J. Ceram. Soc. Jpn., 1998, 106 (11): 1135--1137.
[7] Uno Tomoko, Kosuga Toshihiro, Nakayama Shin, et al. J. Am. Ceram. Soc., 1993, 76 (2): 539--541.
[8] Uno T, Kasuga T, Nakajima K. J. Am. Ceram. Soc., 1991, 74: 3139--3141.
[9] 乔冠军，王永兰，金志浩(QIAO Guan-Jun, { et al). 无机材料?学报(Journal of Inorganic Materials)，1996, 11 (1): 29--32.
[10] 乔冠军，王永兰，金志浩，等. 西安交通大学学报，1995, 29 (6): 96--100. 奬re{[11] 乔冠军，王永兰，金志浩(QIAO Guan-Jun, { et al). 无机材?料学报(Journal of Inorganic Materials)，1995, 10 (2): 169--174.
[12] 乔冠军，王永兰，金志浩(QIAO Guan-Jun, { et al). 无机材?料学报(Journal of Inorganic Materials)，1995, 10 (3): 288--292.
[13] Sentoku Eiichi, Noka Tsutomu. 粉体ぉよび粉末冶金, 1993, 40 (12): 1238--1241.
[14] Sentoku Eiichi, Kashimoto Hironobu, Naka Tsutomu, et al. ?粉体ぉよび粉末冶金, 1992, 40 (1): 44--48.
[15] Xu Hochin H K, Jahanmir Said. J. Am. Ceram. Soc., 1995, 78 (2): 497--500.
[16] Ikeda Kiyohiko, Suzuki Toshiya, Tamiaki Minoru, et al. ?日本机械学会文集(A编), 1993, 59 (558): 319--324.
[17] Davis Janet B, Marshall David B, Housley Robert M, et al. J. Am. Ceram. Soc., 1998, 81 (8): 2169--2175.
[18] Yasuo Hikichi. J. Soc. Mater. Sci. Jpn., 1995, 44 (502): 899--904.
[19] Taira M, Yamaki M. J. Mater. Sci. Lett., 1994, 13: 480--482.
[20] Keiichiro Isomura, Toshihiko Funahashi, Ryoji Uchimura. Kawasaki Steel Technical Report, 1990, (23): 5--11.
[21] Niihara Koichi, Kusunose Takafumi. 化学と工业, 1998, 51 (8): 1221--1223.
[22] Morii Tanimoto T, Okumura M, Nakazawa A G, et al. pp.419-20, In: Kimura S, and Niihara K. ed. Proceeding of 1$^{st$ International Symposium on Science of Engineering
Ceramics, Tokyo, Japan: The Ceramic Society of Jpn., 1991
[23] Niihara Koichi. 日本セテミツクス协会学术论文志, 1991, 99 (10): 974--982.
[24] Katsuaki Suganuma, Geun Sasaki, Teruaki Fujuta, Masatoshi Okumura, Kouichi Niihara, J. Mater. Sci., 1993, 28: 1175--1181.
[25] Kawai Chihiro, Yamakawa Akira. J. Am. Ceram. Soc., 1997, 80 (10): 2705--2708.
[26] Kawai Chihiro, Yamakawa Akira. J. Ceram. Soc. Jpn., 1998, 106 (11): 1135--1137.
[27] Padture Nitin P, Evans Christopher J, Xu Hockin H K, et al. J. Am. Ceram. Soc., 1995, 78 (1): 215--217.
[28] Barsoum Michel W, EI-Raghy Tamer. J. Am. Ceram. Soc., 1996, 79 (7): 1953--1956.