纳米复相陶瓷的制备、显微结构和性能

无机材料学报

纳米复相陶瓷的制备、显微结构和性能

靳喜海; 高濂

中国科学院上海硅酸盐研究所, 上海 200050

收稿日期:2000-03-15 修回日期:2000-04-14 出版日期:2001-03-20 网络出版日期:2001-03-20

Preparation, Microstructure and Properties of Nanocomposite Ceramics

JIN Xi-Hai; GAO Lian

State Key Laboratory of High Performance Ceramics and Superfine Structure; 200050 China

Received:2000-03-15 Revised:2000-04-14 Published:2001-03-20 Online:2001-03-20

摘要/Abstract

摘要： 从纳米复相陶瓷的分类、材料的设计和制备以及材料的微观结构和性能等方面对纳米复相陶瓷进行了详细的阐述，并提出通过纳米和微米复合相互结合以及控制调节材料中晶粒形状和大小来改善瓷体性能的设想．

关键词: 纳米复相陶瓷, 材料设计, 微观结构, 性能

Abstract: The paper made an overview of the classification, material design and the influences of nano-sized particles on the microstructure and properties of nanocomposite ceramics. Finally the author proposed that further improvement of the performances of the ceramics could be achieved by the hybridization of micro and nano composite and the control over the grain morphology.

Key words: nanocomposite, material design, microstructure, properties

中图分类号:

TB383

靳喜海,高濂. 纳米复相陶瓷的制备、显微结构和性能[J]. 无机材料学报.

JIN Xi-Hai,GAO Lian. Preparation, Microstructure and Properties of Nanocomposite Ceramics[J]. Journal of Inorganic Materials.

参考文献

[1] Richard J Brook. セラミックス, 1996, 31 (2): 135--139.
[2] 新原皓一. 日本セラミックス协会学术论文志，1991, 99 (10): 974--982.
[3] Wakai F, et al. Nature, 334 (29): 421--423.
[4] Alan Piciacchio, et al. J. Am. Ceram. Soc., 1994, 77: 2157--64 .
[5] Laura, et al. J. Am. Ceram. Soc., 1996, 79 (12): 3013--19.
[6] Nakahiha Atusushi, et al. J. Ceram. Soc. Jpn., 1992, 100 (4): 448--453.
[7] Jang Byungkoog, et al. J. Ceram. Soc. Jpn., 1994, 102 (9): 863--867.
[8] 高田宽, 等. 粉体および粉末冶金，1990, 37 (7): 152--154.
[9] 高田宽, 等. 粉体および粉末冶金，1991, 38 (3): 36--39.
[10] Hirano Takeshi, { et al. 粉体および粉末冶金, 1994, 41 (10): 1243--1248.
[11] 新原皓一, 等. 粉体および粉末冶金, 1990, 37 (2): 172--176.
[12] Sakaki Gen, et al. J. Ceram. Soc. Jpn., 1992, 100 (4): 536--540.
[13] Sato Shigini, et al. J. Ceram. Soc. Jpn., 1995, 103 (7): 676--679.
[14] 中平敦, 等. 粉体および粉末冶金, 1991, 38 (3): 49--52.
[15] Hirano Takeshi, et al. J. Am. Ceram. Soc., 1996, 79 (1): 33--45.
[16] Levin Igor, et al. J. Am. Ceram. Soc., 1995, 78 (1): 254--56.
[17] Otsuka Jun, et al. J. Ceram. Soc. Jpn., 1994, 102 (1): 29--34.
[18] Zhao Junhong, et al. J. Am, Ceram. Soc., 1993, 76 (2): 503--10.
[19] 中平敦, 等. J. Ceram. Soc. Jpn., 1986, 94 (8): 768--772.
[20] Wahi R P, et al. J. Mater. Sci., 1980, 15: 875--885.
[21] 松木龟一, 等. 粉体および粉末冶金, 1991, 38 (3): 53--56.
[22] 上田尚郎, 等. 粉体および粉末冶金, 1994, 41 (10): 1226--1331.
[23] Bamba N, et al. Nanostructured Materials, 1997, 9: 497--500.
[24] Tompson Mark, et al. J. Am. Ceram. Soc., 1995, 78 (3): 567--71.
[25] Chen I-Wei, et al. J. Am. Ceram. Soc., 1990, 73 (9): 2585--2609.
[26] Tatsuki Ohiji, et al. J. Am. Ceram. Soc., 1994, 77 (12): 3259--62.
[27] YASUDA Eiichi, et al. J. Ceram. Soc. Jpn., 1992, 100 (4): 514--519.
[28] 中平敦, 等. セラミックス, 1991, 26 (3): 218--219.
[29] Takeshi Hirano, et al. Advances in Ceramic-matrix composites II 519--530.
[30] 新原皓一. セラミックス, 1992, 27 (4): 293--299.
[31] 中平敦, 等. 粉体および粉末冶金, 1990, 36 (4): 116--121.
[32] 松木龟一, 等. 粉体および粉末冶金, 1994, 41 (10): 1232--1237.
[33] KANAMARU Moriyosi, et al. J. Ceram. Soc. Jpn., 1992, 100 (4): 408--412.