自韧化氮化硅陶瓷的研究与进展

摘要/Abstract

摘要：

本文阐述了近年来自韧化Si₃N₄陶瓷技术的研究情况，对自韧化Si₃N₄的生长机理、影响柱状Si₃N₄生长的各种因素，以及自韧化Si₃N₄的断裂韧性、强度、韦伯模教、R曲线行为、疲劳行为、蠕变行为、氧化行为、抗热震性和热导做了全面的分析与说明，提出增韧的技术关健是控制柱状Si₃N₄的尺寸与玻璃相的合理运用.

关键词: 自韧化Si₃N₄, 显微组织, 性能, 柱状晶粒

Abstract: Recent anvanceincnts of research on Self-Toughening Si₃N₄ ceramics were reviewed. The growth nleclla1nsin and all kinds of effect factors on Self-Toughening Si₃N₄ ceramics, as well as mechanical and physical properties, snch as the fracture toughness, strength, Weiball modulus, R-curve behavior, fatigue behavior, creepbehavior, oxidation behavior, thermal shock resistance, thermal conductivity were discusscd and analyzed. The key technologies of toughening for Self-Toughening Si₃N₄ ceramics are the control of the size of elougated Si₃N₄ grains and the proper choice of galss phase.

Key words: Self-Toughening Si₃N₄, microstructure, properties, elongated grains

赵振波,于晓东,梁胜德,倪国年. 自韧化氮化硅陶瓷的研究与进展[J]. 无机材料学报.

ZHAO Zhienbo,YU Xiaodong,LIANG Shengde,NI Guonian. Progress and Research on Self-Toughening Si₃N₄ Ceramics[J]. Journal of Inorganic Materials.

参考文献

1 Matsuhiro K, et al. Ceram. Eng. Proc., 1989, 10(7-8): 807.

2 Li C W, et al. ibid, 10(7-8): 632.

3 Lange F F, et al . J. Am. Ceram. Soc., 1979, 62: 428.

4 Woctting G, et al. Non-Oxide Technical and Engineering Ceramics, London/New York, Etsevier, 1986. 83.

5 倪国年等. 北京理工大学学报, 1996, 16(4): 380.

6 罗学涛等. 高技术通讯, 1994, (10): 20.

7 Takeshi Kawashima, et al. J. Ceram. Soc. Japan., Int. Edition, 1991, 99(4): 310.

8 Becher P F, et al. silicon Nitride Ceramics Scientific and Technology Advances, Pittisburgh: Mater. Res. Soc., 1993, (8): 147.

9 Hoffmann M J, et al. ibid, 1993. 3.

10 Whalen P J, et al. Ceram. Eng. Sci. Proc., 1990, 11: 633.

11 Pyzik A J, et al. Int. Conf. silicon Nitride 93, Stuttgart, Germany, 1993.

12 Wild S, et al the Fifth Symposium on Special Ceramics Stoketon, 1970. Manchester: The British Ceramic reserch Association, 1972. 394.

13 Hwang C J, et al. Materials Science Forum, Switzerland: Trans. Tech. Pub., 1989. 84.

14 Grest G S, et al. Acta. Metall, 1985, 33(3): 509.

15 Lai K R, et al. J. Am. Ceram. Soc., 1993, 76: 91.

16 Pyzikk A J, et al. Anna. Rev. Mater. Sci., 1994, 24: 189.

17 Woetting g, et al. See Ref. [8].

18 Kang S L, et al. Structured Ceramics Fracture Mechanics, Pittsburg, PA: Mater. Res. Soc., 1988. 63.

19 Pyzik A J, et al. In: Alper A, ed. Phase Diagrams in advanced Ceramic. New York: Academic, 1993.

20 Pyzik a J, et al. Proc. 41th Int. Symp. Ceramic Materials and Components for Engines, London/New York: Elesvier, 1992. 584.

21 Mitomo M, et al. J. Am. Ceram. Soc., 1990, 73: 2441.

22 Becher P F. ibid 1991, 74(2): 255.

23 Mitomo M, et al. ibid, 1992, 75: 103.

24 Davidge r W. composites, 1987, 18(2): 92.

25 Woetting G, et al. sci. Ceram., 1983, 12: 361.

26 Hirosaki N, et al. Sci. Ceram., 1983, 12: 361.

27 Pyzik A J, et al. See Ref.[8], 1993, (8): 411.

28 Tanaka I, et al. J. Mater. Sci., 1991, 26: 208.

29 Urashima K, et al. Fracture Mechanics of Ceramics Composites, R-Curve Behavior and Fatigue, New York: plenum, 1992. 235.

30 Choi s R, et al. J. Am. Ceram. soc., 1992, 75: 1508.

31 Li C W, et al. ibid, 1992, 75: 1777.

32 White K, eet al. 1990, R-Curve Behavior of Self-reinforced Si₃N₄, Ann. Conf. Composites and Advanced Ceramics, 14th, cocoa Beach, FL. 1990.

33 Ritter J E, et al. J. Mater. Sci., 1991, 26: 5543.

34 Hoffmann M J, et al. see Ref. [8], 1993, (8): 417.

35 邢志强等. 硅酸盐学报, 1995, 23(1): 14.

36 Baldoni J G, et al. Third Int. symp. Ceramic Materials and Components for Engines, Wesiterville, Oh: Am. Ceram. Soc., 1989, 768.

37 朱世杰等. 材料研究学报, 1995, 9(2): 129.

38 Kossowsky R, et al. J. Mater. Sci., 1975, 10: 983.

39 Lange F F, et al. ibid, 1980, 15: 601.

40 Dixon-Stubbs P J, et al. J. Mater. Sci. Letters, 1979, 58: 845.

41 Heinrich J, et al. Ber Dt Keram Gas., 1984, 61: 399.

42 罗学涛等. 94年全国结构陶瓷. 功能陶瓷. 金属陶瓷封接学术会议. 北京, 1994. 69.

43 Babini G N, et al. J. Mater. Sci., 1984, 19: 1029.

44 Heinrich J, et al. J. am. Ceram. Soc., 1988, 71(1): C-28.

[1]	黄洁, 汪刘应, 王滨, 刘顾, 王伟超, 葛超群. 基于微纳结构设计的电磁性能调控研究进展[J]. 无机材料学报, 2024, 39(8): 853-870.
[2]	黄建锋, 梁瑞虹, 周志勇. W/Cr共掺杂对CaBi₂Nb₂O₉陶瓷晶体结构及电学性能的影响[J]. 无机材料学报, 2024, 39(8): 887-894.
[3]	赵志翰, 郭鹏, 魏菁, 崔丽, 刘山泽, 张文龙, 陈仁德, 汪爱英. Ti-DLC薄膜压阻性能及载流子输运行为研究[J]. 无机材料学报, 2024, 39(8): 879-886.
[4]	范武刚, 曹雄, 周响, 李玲, 赵冠楠, 张兆泉. 8YSZ陶瓷在模拟压水堆水环境中的耐腐蚀性能[J]. 无机材料学报, 2024, 39(7): 803-809.
[5]	张育育, 吴轶城, 孙佳, 付前刚. 聚合物转化SiHfCN陶瓷的制备及其吸波性能[J]. 无机材料学报, 2024, 39(6): 681-690.
[6]	王伟明, 王为得, 粟毅, 马青松, 姚冬旭, 曾宇平. 以非氧化物为烧结助剂制备高导热氮化硅陶瓷的研究进展[J]. 无机材料学报, 2024, 39(6): 634-646.
[7]	孙海洋, 季伟, 王为民, 傅正义. TiB-Ti周期序构复合材料设计、制备及性能研究[J]. 无机材料学报, 2024, 39(6): 662-670.
[8]	蔡飞燕, 倪德伟, 董绍明. 高熵碳化物超高温陶瓷的研究进展[J]. 无机材料学报, 2024, 39(6): 591-608.
[9]	刘国昂, 王海龙, 方成, 黄飞龙, 杨欢. B₄C含量对(Ti_0.25Zr_0.25Hf_0.25Ta_0.25)B₂-B₄C陶瓷力学性能及抗氧化性能的影响[J]. 无机材料学报, 2024, 39(6): 697-706.
[10]	粟毅, 史扬帆, 贾成兰, 迟蓬涛, 高扬, 马青松, 陈思安. 浆料浸渍辅助PIP工艺制备C/HfC-SiC复合材料的微观结构及性能研究[J]. 无机材料学报, 2024, 39(6): 726-732.
[11]	郑斌, 康凯, 张青, 叶昉, 解静, 贾研, 孙国栋, 成来飞. 前驱体转化陶瓷法制备Ti₃SiC₂陶瓷及其热稳定性研究[J]. 无机材料学报, 2024, 39(6): 733-740.
[12]	郑雅雯, 张翠萍, 张瑞杰, 夏乾, 茹红强. 硼酸碳热还原-渗硅反应烧结制备碳化硼陶瓷复合材料[J]. 无机材料学报, 2024, 39(6): 707-714.
[13]	吕朝阳, 徐勇, 杨久延, 涂广升, 涂兵田, 王皓. MgF₂助剂对MgAl_1.9Ga_0.1O₄透明陶瓷的制备与光学性能的影响[J]. 无机材料学报, 2024, 39(5): 531-538.
[14]	石睿健, 雷俊伟, 张祎, 谢爱文, 左如忠. 具有优异储能性能与充放电特性的类线性NaNbO₃基无铅弛豫反铁电陶瓷[J]. 无机材料学报, 2024, 39(4): 423-431.
[15]	陈正鹏, 金芳军, 李明飞, 董江波, 许仁辞, 徐韩昭, 熊凯, 饶睦敏, 陈创庭, 李晓伟, 凌意瀚. 双钙钛矿Sr₂CoFeO₅₊_δ阴极材料的制备及其中温固体氧化物燃料电池性能研究[J]. 无机材料学报, 2024, 39(3): 337-344.