Progress and Research on Self-Toughening Si3N4 Ceramics

Abstract

Abstract: Recent anvanceincnts of research on Self-Toughening Si₃N₄ ceramics were reviewed. The growth nleclla1nsin and all kinds of effect factors on Self-Toughening Si₃N₄ ceramics, as well as mechanical and physical properties, snch as the fracture toughness, strength, Weiball modulus, R-curve behavior, fatigue behavior, creepbehavior, oxidation behavior, thermal shock resistance, thermal conductivity were discusscd and analyzed. The key technologies of toughening for Self-Toughening Si₃N₄ ceramics are the control of the size of elougated Si₃N₄ grains and the proper choice of galss phase.

Key words: Self-Toughening Si₃N₄, microstructure, properties, elongated grains

ZHAO Zhienbo,YU Xiaodong,LIANG Shengde,NI Guonian. Progress and Research on Self-Toughening Si₃N₄ Ceramics[J]. Journal of Inorganic Materials.

References

1 Matsuhiro K, et al. Ceram. Eng. Proc., 1989, 10(7-8): 807.

2 Li C W, et al. ibid, 10(7-8): 632.

3 Lange F F, et al . J. Am. Ceram. Soc., 1979, 62: 428.

4 Woctting G, et al. Non-Oxide Technical and Engineering Ceramics, London/New York, Etsevier, 1986. 83.

5 倪国年等. 北京理工大学学报, 1996, 16(4): 380.

6 罗学涛等. 高技术通讯, 1994, (10): 20.

7 Takeshi Kawashima, et al. J. Ceram. Soc. Japan., Int. Edition, 1991, 99(4): 310.

8 Becher P F, et al. silicon Nitride Ceramics Scientific and Technology Advances, Pittisburgh: Mater. Res. Soc., 1993, (8): 147.

9 Hoffmann M J, et al. ibid, 1993. 3.

10 Whalen P J, et al. Ceram. Eng. Sci. Proc., 1990, 11: 633.

11 Pyzik A J, et al. Int. Conf. silicon Nitride 93, Stuttgart, Germany, 1993.

12 Wild S, et al the Fifth Symposium on Special Ceramics Stoketon, 1970. Manchester: The British Ceramic reserch Association, 1972. 394.

13 Hwang C J, et al. Materials Science Forum, Switzerland: Trans. Tech. Pub., 1989. 84.

14 Grest G S, et al. Acta. Metall, 1985, 33(3): 509.

15 Lai K R, et al. J. Am. Ceram. Soc., 1993, 76: 91.

16 Pyzikk A J, et al. Anna. Rev. Mater. Sci., 1994, 24: 189.

17 Woetting g, et al. See Ref. [8].

18 Kang S L, et al. Structured Ceramics Fracture Mechanics, Pittsburg, PA: Mater. Res. Soc., 1988. 63.

19 Pyzik A J, et al. In: Alper A, ed. Phase Diagrams in advanced Ceramic. New York: Academic, 1993.

20 Pyzik a J, et al. Proc. 41th Int. Symp. Ceramic Materials and Components for Engines, London/New York: Elesvier, 1992. 584.

21 Mitomo M, et al. J. Am. Ceram. Soc., 1990, 73: 2441.

22 Becher P F. ibid 1991, 74(2): 255.

23 Mitomo M, et al. ibid, 1992, 75: 103.

24 Davidge r W. composites, 1987, 18(2): 92.

25 Woetting G, et al. sci. Ceram., 1983, 12: 361.

26 Hirosaki N, et al. Sci. Ceram., 1983, 12: 361.

27 Pyzik A J, et al. See Ref.[8], 1993, (8): 411.

28 Tanaka I, et al. J. Mater. Sci., 1991, 26: 208.

29 Urashima K, et al. Fracture Mechanics of Ceramics Composites, R-Curve Behavior and Fatigue, New York: plenum, 1992. 235.

30 Choi s R, et al. J. Am. Ceram. soc., 1992, 75: 1508.

31 Li C W, et al. ibid, 1992, 75: 1777.

32 White K, eet al. 1990, R-Curve Behavior of Self-reinforced Si₃N₄, Ann. Conf. Composites and Advanced Ceramics, 14th, cocoa Beach, FL. 1990.

33 Ritter J E, et al. J. Mater. Sci., 1991, 26: 5543.

34 Hoffmann M J, et al. see Ref. [8], 1993, (8): 417.

35 邢志强等. 硅酸盐学报, 1995, 23(1): 14.

36 Baldoni J G, et al. Third Int. symp. Ceramic Materials and Components for Engines, Wesiterville, Oh: Am. Ceram. Soc., 1989, 768.

37 朱世杰等. 材料研究学报, 1995, 9(2): 129.

38 Kossowsky R, et al. J. Mater. Sci., 1975, 10: 983.

39 Lange F F, et al. ibid, 1980, 15: 601.

40 Dixon-Stubbs P J, et al. J. Mater. Sci. Letters, 1979, 58: 845.

41 Heinrich J, et al. Ber Dt Keram Gas., 1984, 61: 399.

42 罗学涛等. 94年全国结构陶瓷. 功能陶瓷. 金属陶瓷封接学术会议. 北京, 1994. 69.

43 Babini G N, et al. J. Mater. Sci., 1984, 19: 1029.

44 Heinrich J, et al. J. am. Ceram. Soc., 1988, 71(1): C-28.

[1]	MU Haojie, ZHANG Yuanjiang, YU Bin, FU Xiumei, ZHOU Shibin, LI Xiaodong. Preparation and Properties of ZrO₂ Doped Y₂O₃-MgO Nanocomposite Ceramics [J]. Journal of Inorganic Materials, 2025, 40(3): 281-289.
[2]	FAN Wugang, CAO Xiong, ZHOU Xiang, LI Ling, ZHAO Guannan, ZHANG Zhaoquan. Anticorrosion Performance of 8YSZ Ceramics in Simulated Aqueous Environment of Pressurized Water Reactor [J]. Journal of Inorganic Materials, 2024, 39(7): 803-809.
[3]	CHEN Qian, SU Haijun, JIANG Hao, SHEN Zhonglin, YU Minghui, ZHANG Zhuo. Progress of Ultra-high Temperature Oxide Ceramics: Laser Additive Manufacturing and Microstructure Evolution [J]. Journal of Inorganic Materials, 2024, 39(7): 741-753.
[4]	JIANG Lingyi, PANG Shengyang, YANG Chao, ZHANG Yue, HU Chenglong, TANG Sufang. Preparation and Oxidation Behaviors of C/SiC-BN Composites [J]. Journal of Inorganic Materials, 2024, 39(7): 779-786.
[5]	ZHENG Yawen, ZHANG Cuiping, ZHANG Ruijie, XIA Qian, RU Hongqiang. Fabrication of Boron Carbide Ceramic Composites by Boronic Acid Carbothermal Reduction and Silicon Infiltration Reaction Sintering [J]. Journal of Inorganic Materials, 2024, 39(6): 707-714.
[6]	XUE Yifan, LI Weijie, ZHANG Zhongwei, PANG Xu, LIU Yu. Process Control of PyC Interphases Microstructure and Uniformity in Carbon Fiber Cloth [J]. Journal of Inorganic Materials, 2024, 39(4): 399-408.
[7]	SUN Chuan, HE Pengfei, HU Zhenfeng, WANG Rong, XING Yue, ZHANG Zhibin, LI Jinglong, WAN Chunlei, LIANG Xiubing. SiC-based Ceramic Materials Incorporating GNPs Array: Preparation and Mechanical Characterization [J]. Journal of Inorganic Materials, 2024, 39(3): 267-273.
[8]	ZHENG Jiaqian, LU Xiao, LU Yajie, WANG Yingjun, WANG Zhen, LU Jianxi. Functional Bioadaptability in Medical Bioceramics: Biological Mechanism and Application [J]. Journal of Inorganic Materials, 2024, 39(1): 1-16.
[9]	HE Danqi, WEI Mingxu, LIU Ruizhi, TANG Zhixin, ZHAI Pengcheng, ZHAO Wenyu. Heavy-Fermion YbAl₃ Materials: One-step Synthesis and Enhanced Thermoelectric Performance [J]. Journal of Inorganic Materials, 2023, 38(5): 577-582.
[10]	WU Shuang, GOU Yanzi, WANG Yongshou, SONG Quzhi, ZHANG Qingyu, WANG Yingde. Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers [J]. Journal of Inorganic Materials, 2023, 38(5): 569-576.
[11]	XIE Jiaye, LI Liwen, ZHU Qiang. Contrastive Study on in Vitro Antibacterial Property and Biocompatibility of Three Clinical Pulp Capping Agents [J]. Journal of Inorganic Materials, 2023, 38(12): 1449-1456.
[12]	LI Jianbo, TIAN Zhen, JIANG Quanwei, YU Lifeng, KANG Huijun, CAO Zhiqiang, WANG Tongmin. Effects of Different Element Doping on Microstructure and Thermoelectric Properties of CaTiO₃ [J]. Journal of Inorganic Materials, 2023, 38(12): 1396-1404.
[13]	WANG Haidong, WANG Yan, ZHU Zhaojie, LI Jianfu, LAKSHMINARAYANA Gandham, TU Chaoyang. Crystal Growth and Structural, Optical, and Visible Fluorescence Traits of Dy³⁺-doped SrGdGa₃O₇ Crystal [J]. Journal of Inorganic Materials, 2023, 38(12): 1475-1482.
[14]	WU Dongjiang, ZHAO Ziyuan, YU Xuexin, MA Guangyi, YOU Zhulin, REN Guanhui, NIU Fangyong. Direct Additive Manufacturing of Al₂O₃-TiC_p Composite Ceramics by Laser Directed Energy Deposition [J]. Journal of Inorganic Materials, 2023, 38(10): 1183-1192.
[15]	DENG Taoli, CHEN Hexin, HEI Lingli, LI Shuxing, XIE Rongjun. Achieving High Light Uniformity Laser-driven White Lighting Source by Introducing Secondary Phases in Phosphor Converters [J]. Journal of Inorganic Materials, 2022, 37(8): 891-896.

Progress and Research on Self-Toughening Si₃N₄ Ceramics

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments