孔结构可控的网眼多孔陶瓷的制备

无机材料学报

孔结构可控的网眼多孔陶瓷的制备

朱新文; 江东亮; 谭寿洪; 张兆泉

中国科学院上海硅酸盐研究所高性能陶瓷和超微结构国家重点实验室上海 200050

收稿日期:2001-02-16 修回日期:2001-03-15 出版日期:2002-01-20 网络出版日期:2002-01-20

Preparation of Reticulated Porous Ceramics with a Controlled Pore Structure

ZHU Xin-Wen; JIANG Dong-Liang; TAN Shou-Hong; ZHANG Zhao-Quan

State Key Lab of High Performance Ceramics and Superfine Microstructure; Shanghai Institute of Ce-ramics; Chinese Academy of Sciences; Shanghai 200050; China

Received:2001-02-16 Revised:2001-03-15 Published:2002-01-20 Online:2002-01-20

摘要/Abstract

摘要： 采用一种具有三维网状结构和贯通气孔的有机泡沫体作为载体，首先利用有机泡沫浸渍工艺制备出高气孔率且几乎没有堵孔的网眼素坯，经过排塑、预烧处理获得具有一定强度的预制体．由于未经烧结，预制体的孔筋呈疏松多孔结构．利用粘度较低、流动性很好的浆料对预制体进行涂覆处理．结果表明：通过这种处理，孔筋上的裂纹被消除，非常细的孔筋被避免，孔筋厚度比较均匀，从而获得了结构非常均匀的网眼陶瓷．相对密度、孔筋厚度、孔径大小可以根据徐覆次数来调节．随着涂覆次数的增加，孔径减小，孔筋厚度增加，相对密度也增加．本工作为网眼陶瓷孔结构的精确设计提供了一种新工艺，对于优化其力学性能、渗透率等性能具有重要意义．

关键词: 多孔陶瓷, 结构, 浆料, 涂覆

Abstract: A polymeric sponge with interconnected pores in all three dimensions was chosen to prepare firstly the reticulated preform by the replication process. After the
polymeric sponge was burned out, the reticulated preform was presintered to obtain enough operating strength. The struts of the reticulated preform exhibit porous
microstructure, which is beneficial to coating of the slurry on them. The coating treatment was conducted by the thinner slurry on the reticulated preform. The
typical flaws such as longitudinal strut cracks were eliminated by recoating process; additionally, very thin struts were avoided by coating. The reticulated
ceramics with a very uniform macrostructure was produced by recoating process and few filled cells were invisible. The effects of coating numbers on the pore
size, strut thickness and relative density were investigated in detail. This work has developed successfully an innovative approach to precisely control the macrostructure
for the reticulated ceramics, which is valuable to predict and optimize their properties such as mechanical properties and permeability.

Key words: porous ceramics, macrostructure, slurry, coating

中图分类号:

TM285

朱新文,江东亮,谭寿洪,张兆泉. 孔结构可控的网眼多孔陶瓷的制备[J]. 无机材料学报.

ZHU Xin-Wen,JIANG Dong-Liang,TAN Shou-Hong,ZHANG Zhao-Quan. Preparation of Reticulated Porous Ceramics with a Controlled Pore Structure[J]. Journal of Inorganic Materials.

[1]	朱文杰, 唐璐, 陆继长, 刘江平, 罗永明. 钙钛矿型氧化物催化氧化挥发性有机化合物的研究进展[J]. 无机材料学报, 2025, 40(7): 735-746.
[2]	魏志帆, 陈国清, 祖宇飞, 刘渊, 李明浩, 付雪松, 周文龙. ZrB₂-HfSi₂复相陶瓷显微组织及其核-周结构形成机制[J]. 无机材料学报, 2025, 40(7): 817-825.
[3]	胡智超, 杨鸿宇, 杨鸿程, 孙成礼, 杨俊, 李恩竹. P-V-L键理论在微波介质陶瓷性能调控中的应用[J]. 无机材料学报, 2025, 40(6): 609-626.
[4]	张碧辉, 刘小强, 陈湘明. Ruddlesden-Popper结构杂化非常规铁电体的研究进展[J]. 无机材料学报, 2025, 40(6): 587-608.
[5]	周阳阳, 张艳艳, 于子怡, 傅正钱, 许钫钫, 梁瑞虹, 周志勇. 通过Bi³⁺自掺杂增强CaBi₄Ti₄O₁₅基陶瓷压电性能[J]. 无机材料学报, 2025, 40(6): 719-728.
[6]	黄子鹏, 贾文晓, 李玲霞. (Ti_0.5W_0.5)⁵⁺掺杂MgNb₂O₆陶瓷的晶体结构与太赫兹介电性能[J]. 无机材料学报, 2025, 40(6): 647-655.
[7]	赵凯旋, 刘文鹏, 丁守军, 窦仁勤, 罗建乔, 高进云, 孙贵花, 任浩, 张庆礼. 熔融法制备Nd:YLF原料及其晶体生长和性能研究[J]. 无机材料学报, 2025, 40(5): 529-535.
[8]	郭子玉, 朱云洲, 王力, 陈健, 李红, 黄政仁. Zn²⁺催化剂对酚醛树脂/乙二醇制备多孔碳微观孔结构的影响[J]. 无机材料学报, 2025, 40(5): 466-472.
[9]	洪培萍, 梁龙, 吴炼, 马颖康, 庞浩. ZIF-67结构调控及其对盐酸金霉素的吸附性能研究[J]. 无机材料学报, 2025, 40(4): 388-396.
[10]	谌广昌, 段小明, 朱金荣, 龚情, 蔡德龙, 李宇航, 杨东雷, 陈彪, 李新民, 邓旭东, 余瑾, 刘博雅, 何培刚, 贾德昌, 周玉. 直升机特定结构先进陶瓷材料研究进展与应用展望[J]. 无机材料学报, 2025, 40(3): 225-244.
[11]	穆浩洁, 张源江, 喻彬, 付秀梅, 周世斌, 李晓东. ZrO₂掺杂Y₂O₃-MgO纳米复相陶瓷的制备及性能研究[J]. 无机材料学报, 2025, 40(3): 281-289.
[12]	鲍伟超, 郭晓杰, 辛晓婷, 彭湃, 王新刚, 刘吉轩, 张国军, 许钫钫. 在碳化物陶瓷中构筑金属原子层分相共生结构[J]. 无机材料学报, 2025, 40(1): 17-22.
[13]	周帆, 田志林, 李斌. 热防护系统用碳化物超高温陶瓷抗烧蚀涂层研究进展[J]. 无机材料学报, 2025, 40(1): 1-16.
[14]	魏相霞, 张晓飞, 徐凯龙, 陈张伟. 增材制造柔性压电材料的现状与展望[J]. 无机材料学报, 2024, 39(9): 965-978.
[15]	王旭, 李翔, 寇华敏, 方伟, 吴庆辉, 苏良碧. 不同浓度Y³⁺离子掺杂对CaF₂晶体性能的影响[J]. 无机材料学报, 2024, 39(9): 1029-1034.