碳化锆陶瓷复合材料的制备、显微组织与性能

doi:10.15541/jim20140480

摘要/Abstract

摘要：

碳化锆(ZrC)陶瓷复合材料具有熔点高、密度低、耐烧蚀的优点, 在超硬、航天防热、新能源等领域应用前景广阔。本文概述了ZrC金属陶瓷和复相陶瓷、纤维增强ZrC复合材料的制备方法。着重介绍了粉末烧结、先驱体转化、反应浸渗等工艺的应用, 并讨论了不同制备工艺下复合材料显微组织的特点。在总结两类材料力学性能和烧蚀性能的基础上, 分析了各自的影响因素, 并指出ZrC金属陶瓷和复相陶瓷韧性低, 纤维增强ZrC复合材料烧蚀层易剥落的问题。最后总结展望了ZrC陶瓷复合材料相关研究的发展趋势。

关键词: ZrC复合材料, 制备, 组织结构, 性能, 综述

Abstract:

ZrC ceramic composites have been proposed for a variety of applications in super-hard, thermal protection and new energy fields due to their excellent properties, such as high melting point, low density and good ablation resistance. The preparation techniques for ZrC cements, composite ceramics and fiber reinforced ZrC composites are reviewed, including powder sintering, precursor infiltration and pyrolysis and reactive melt infiltration. The effects of processing on microstructure of ZrC composite are discussed. Mechanical properties and ablation properties of ZrC ceramic composites are summarized. The problems, low toughness and spalling of ablation layer, for ZrC cements, composite ceramics and fiber reinforced ZrC composites are proposed, respectively. Finally, the trend of researches on ZrC ceramic composites is also prospected.

Key words: ZrC ceramic composites, preparation, microstructure, performance, review

中图分类号:

TB332

王东, 王玉金. 碳化锆陶瓷复合材料的制备、显微组织与性能[J]. 无机材料学报, 2015, 30(5): 449-458.

WANG Dong, WANG Yu-Jin. Processing, Microstructure and Properties of ZrC Ceramic Composites[J]. Journal of Inorganic Materials, 2015, 30(5): 449-458.

参考文献

[1] JUSTIN J F, JANKOWIAK A. Ultra high temperature ceramics: densification, properties and thermal stability. The Onera Journal Aerospace Lab, 2011, 3: 1–11.
[2] KATOH Y, VASUDEVAMURTHY G, NOZAWA T, et al. Properties of zirconium carbide for nuclear fuel applications. Journal of Nuclear Materials, 2013, 441: 718–742.
[3] PIERRAT B, BALAT-PICHELIN M, SILVESTRONI L, et al. High temperature oxidation of ZrC-20% MoSi2 in air for future solar receivers. Solar Energy Materials & Solar Cells, 2011, 95: 2228–2237.
[4] SANI E, MERCATELLI L, FRANCINI F, et al. Ultra-refractory ceramics for high-temperature solar absorbers. Scripta Materialia, 2011, 65: 775–778.
[5] ZHANG S C, HILMAS G E, FAHRENHOLTZ W G. Zirconium carbide-tungsten cermets prepared by in situ reaction sintering. Journal of the American Ceramic Society, 2007, 90(6): 1930–1933.
[6] SONG G M, WANG Y J, ZHOU Y. The mechanical and thermophysical properties of ZrC/W composites at elevated temperature. Materials Science and Engineering A, 2002, 334: 223–232.
[7] LIDMAN W G, HAMJIAN H J. Reactions during sintering of a zirconium carbide-niobium cermet. Journal of the American Ceramic Society, 1952, 35(9): 236–240.
[8] SCHOENMAN L. 4000°F materials for low-thrust rocket engines. Journal of propulsion and power, 1995, 11(6): 1261–1267.
[9] SORRELL C C, STUBICAN V S, BRADT R C. Mechanical properties of ZrC-ZrB2 and ZrC-TiB2 directionally solidified eutectics. Journal of the American Ceramic Society, 1986, 69(4): 317–321.
[10] WU W W, ZHANG G J, KAN Y M, et al. Reactive hot pressing of ZrB2-SiC-ZrC composites at 1600℃. Journal of the American Ceramic Society, 2008, 91(8): 2501–2508.
[11] SILVESTRONI L, SCITI D, KLING J, et al. Sintering mechanisms of zirconium and hafnium carbides doped with MoSi2. Journal of the American Ceramic Society, 2009, 92(7): 1574–1579.
[12] SILVESTRONI L, SCITI D, BALAT-PICHELIN M, et al. Zirconium carbide doped with tantalum silicide: Microstructure, mechanical properties and high temperature oxidation. Materials Chemistry and Physics, 2013, 143: 407–415.
[13] ZHANG X H, QU Q, HAN J C, et al. Microstructural features and mechanical properties of ZrB2-SiC-ZrC composites fabricated by hot pressing and reactive hot pressing. Scripta Materialia, 2008, 59: 753–756.
[14] WU W W, ZHANG G J, KAN Y M, et al. Reactive hot pressing of ZrB2-SiC-ZrC ultra high-temperature ceramics at 1800℃. Journal of the American Ceramic Society, 2006, 89(9): 2967–2969.
[15] TSUCHIDA T, YAMAMOTO S. MA-SHS and SPS of ZrB2-ZrC composites. Solid State Ionics, 2004, 172: 215–216.
[16] YUNG D L, KOLLO L, HUSSAINOVA I, et al. Reactive sintering of ZrC-TiC composites. Key Engineering Materials, 2013, 527: 20-25.
[17] SILVESTRONI L, SCITI D. Microstructure and properties of pressureless sintered ZrC-based materials. Journal of Materials Research, 2008, 23(7): 1882-1889.
[18] HAN W B, WANG Z. Fabrication and oxidation behavior of a reaction derived graphite-ZrC composite for ultrahigh temperature applications. Materials Letters, 2009, 63: 2175–2177.
[19] 张立同主编. 纤维增韧碳化硅陶瓷复合材料. 北京: 化学工业出版社, 2009: 10, 78.
[20] BARNIER P, BRODHAG C, THEVENOT F. Hot-pressing kinetics of zirconium carbide. Journal of Materials Science, 1986, 21(7): 2547–2552.
[21] ZHAO L, JIA D, DUAN X, et al. Pressureless sintering of ZrC-based ceramics by enhancing powder sinterability. International Journal of Refractory Metals and Hard Materials, 2011, 29: 516–521.
[22] MIN-HAGA E, SCOTT W D. Sintering and mechanical properties of ZrC-ZrO2 composites. Journal of Materials Science, 1988, 23(8): 2865–2870.
[23] 胡志毅. ZrB2-ZrC复合材料的制备及力学性能研究. 哈尔滨: 哈尔滨工业大学硕士学位论文, 2012.
[24] LANDWEHR S E, HILMAS G E, FAHRENHOLTZ W G, et al. Microstructure and mechanical characterization of ZrC-Mo cermets produced by hot isostatic pressing. Materials Science and Engineering A, 2008, 497(1/2):79–86.
[25] LANDWEHR S E, HILMAS G E, FAHRENHOLTZ W G, et al. Thermal properties and thermal shock resistance of liquid phase sintered ZrC-Mo cermets. Materials Chemistry and Physics, 2009, 115: 690–695.
[26] WANG X G, LIU J X, KAN Y M, et al. Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M=V, Nb, and Ta) additions. Journal of the European Ceramic Society, 2012, 32: 1795–1802.
[27] WANG X G, ZHANG G J, ZHAO J, et al. High-strength ZrC ceramics doped with aluminum. Journal of the American Ceramic Society, 2014, 97(11): 3367–3370.
[28] WANG X G, ZHANG G J, XUE J X, et al. Reactive hot pressing of ZrC–SiC ceramics at low temperature. Journal of the American Ceramic Society, 2013, 96(1): 32–36.
[29] KIM K H, SHIM K B. The effect of lanthanum on the fabrication of ZrB2-ZrC composites by spark plasma sintering. Materials Characterization, 2003, 50(1): 31–37.
[30] QU Q, HAN J C, HAN W B, et al. In situ synthesis mechanism and characterization of ZrB2-ZrC-SiC ultra high-temperature ceramics. Materials Chemistry and Physics, 2008, 110(2/3): 216–221.
[31] RANGARAJ L, DIVAKAR C, JAYARAM V. Reactive hot pressing of ZrB2-ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 2010, 30(15): 3263–3266.
[32] GUO S, KAGAWA Y, NISHIMURA T. Tough hybrid ceramic- based material with high strength. Scripta Materialia, 2012, 67: 744–747.
[33] TOKITA M. Trends in advanced SPS spark plasma sintering systems and technology. Journal of the Society of Powder Technology Japan, 1993, 30(11): 790–804.
[34] GUO S Q, KAGAWA Y, TNISHIMURA T, et al. Mechanical and physical behavior of spark plasma sintered ZrC-ZrB2-SiC composites. Journal of the European Ceramic Society, 2008, 28(6): 1279–1285.
[35] GOUTIER F, TROLLIARD G, VALETTE S, et al. Role of impurities on the spark plasma sintering of ZrCx-ZrB2 composites. Journal of the European Ceramic Society, 2008, 28 (3): 671–678.
[36] GENDRE M, MAITRE A, TROLLIARD G. A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powders. Acta Materialia, 2010, 58(7): 2598–2609.
[37] SCITI D, GUICCIARDI S, NYGREN M. Spark plasma sintering and mechanical behaviour of ZrC-based composites. Scripta Materialia, 2008, 59(6): 638–641.
[38] JOHNSON W B, NAGELBERG A S, BREVA E. Kinetics of formation of a platelet-reinforced ceramic composite prepared by the directed reaction of zirconium with boron carbide. Journal of the American Ceramic Society, 1991, 74(9): 2093–2101.
[39] WOO S K, KIM C H. Fabrication and microstructural evaluation of ZrB2/ZrC/Zr composites by liquid infiltration. Journal of Materials Science, 1994, 29(20): 5309–5315.
[40] DICKERSON M B, SNYDER R L, SANDHAGE K H. Dense near net-shaped, carbide/refractory metal composites at modest temperatures by the displacive compensation of porosity (DCP) method. Journal of the American Ceramic Society, 2002, 85(3): 730–732.
[41] DICKERSON M B, WURM P J, SCHORR J R, et al. Near net-shape, ultra-high melting, recession-resistant ZrC/W-based rocket nozzle liners via the displacive compensation of porosity (DCP) method. Journal of Materials Science, 2004, 39(19): 6005–6015.
[42] LIPKE D W, ZHANG Y, LIU Y, et al. Near net-shape/net- dimension ZrC/W-based composites with complex geometries via rapid prototyping and displacive compensation of porosity. Journal of the European Ceramic Society, 2010, 30(11): 2265–2277.
[43] ZHAO Y W, WANG Y J, ZHOU Y, et al. Ternary phase ZrxCuyCz in reactively infiltrated ZrC/W composite. Journal of the American Ceramic Society, 2011, 94(10): 3178–3180.
[44] SAYIR A. Carbon ?ber reinforced hafnium carbide composite. Journal of Materials Science, 2004, 39: 5995–6003.
[45] LOW I M, SAKKA Y, HU C F. MAX Phases and Ultra-high Temperature Ceramics for Extreme Environments, 1st Edition. Hershey: Engineering Science Reference, 2013: 454.
[46] 赵丹. 耐超高温陶瓷先驱体及其复合材料的制备和性能研究. 长沙: 国防科学技术大学博士学位论文, 2011.
[47] LI Q, DONG S, WANG Z, et al. Microstructures and mechanical properties of 3D 4-directional, Cf/ZrC-SiC composites using ZrC precursor and polycarbosilane. Materials Science and Engineering B, 2013, 178(18): 1186–1190.
[48] 王其坤, 胡海峰, 陈朝辉. 先驱体转化法制备2D C/SiC-ZrC复合材料中ZrC含量对材料结构性能影响研究. 航空材料学报, 2009, 29(4): 72–76.
[49] ZHAO D, ZHANG C R, HU H F, et al. Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process. Ceramics International, 2011, 37(7): 2089–2093.
[50] Ceramics matrix composites.http://www.ultramet.com/ceramic_ matrix_composites.html[Eb/OL].2014-12-02.
[51] ZHU Y, WANG S, LI W, et al. Preparation of carbon fiber reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature. Scripta Materialia, 2012, 67(10): 822–825.
[52] ZHU Y, WANG S, CHEN H, et al. Fabrication of Cf/ZrC composites by infiltrating Cf/C performs with Zr-Cu alloys. Materials Letters, 2013, 108: 204–207.
[53] ZHU Y, WANG S, CHEN H, et al. Fabrication and characterization of 3-D Cf/ZrC composites by low-temperature liquid metal infiltration. Composites: Part B, 2014, 56: 756–761.
[54] CHEN S, ZHANG C, ZHANG Y et al. Influence of pyrocarbon amount in C/C preform on the microstructure and properties of C/ZrC composites prepared via reactive melt infiltration. Materials and Design, 2014, 58: 570-576.
[55] JIANG J, WANG S, LI W, et al. Preparation of 3D Cf/ZrC-SiC composites by joint processes of PIP and RMI. Materials Science and Engineering: A, 2014, 607(23): 334–340.
[56] TONG Y, BAI S, YE Y, et al. Reactive melt infiltration of a ZrB2 modified C/ZrC composite by a eutectic Zr-B alloy. Materials Letters, 2015, 138(1): 208–211.
[57] RANGARAJ L, SURESHA S, DIVAKAR C, et al. Low- temperature processing of ZrB2-ZrC composites by reactive hot pressing. Metallurgical and Materials Transactions A, 2008, 39A: 1496–1505.
[58] WANG X G, GUO W M, KAN Y M, et al. Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives. Journal of the European Ceramic Society, 2011, 31:1103–1111.
[59] LANDWEHR S E, HILMAS G E, FAHRENHOLTZ W G. Processing of ZrC-Mo cermets for high temperature applications, part II: pressureless sintering and mechanical properties. Journal of the American Ceramic Society, 2008, 91(3): 873–878.
[60] BREVAL E. Microstructure of platelet-reinforced ceramics prepared by the directed reaction of zirconium with boron carbide. Journal of the American Ceramic Society, 1992, 75(8): 2139–2145.
[61] ZHANG S M, WANG S, ZHU Y L, et al. Fabrication of ZrB2-ZrC-based composites by reactive melt infiltration at relative low temperature. Scripta Materialia, 2011, 65(2): 139–142.
[62] PADMAVATHI N, KUMARI S, PRASAD V V B, et al. Processing of carbon-fiber reinforced (SiC+ZrC) mini-composites by soft-solution approach and their characterization. Ceramics International, 2009, 35(8): 3447–3454.
[63] LI H B, ZHANG L T, CHENG L F, et al. Fabrication of 2D C/ZrC-SiC composite and its structural evolution under high- temperature treatment up to 1800℃. Ceramics International, 2009, 35(7): 2831–2836.
[64] ZOU L, WALI N, YANG J M, et al. Microstructural characterization of a Cf/ZrC composite manufactured by reactive melt infiltration. International Journal of Applied Ceramic Technology, 2011, 8(2): 329–341.
[65] NATALIE ALICE WALI. Fundamental Study of a Refractory-based Carbon Fiber Reinforced Composite made by Reactive Melt Infiltration for Hypersonic Applications. Los Angeles: Doctoral Dissertation of University of California Los Angeles, 2011.
[66] ZOU L H, WALI N, YANG J M, et al. Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration. Journal of the European Ceramic Society, 2010, 30(6): 1527–1535.
[67] WANG D, WANG Y, RAO J, et al. Influence of reactive melt infiltration parameters on microstructure and properties of low temperature derived Cf/ZrC composites. Materials Science and Engineering: A, 2013, 568(15): 25–32.
[68] TONG Y, BAI S, CHEN K. C/C-ZrC composite prepared by chemical vapor infiltration combined with alloyed reactive melt infiltration. Ceramics International, 2012, 38(7): 5723–5730.
[69] 张鹏. 反应熔渗法制备Cf/(HfC+MC)复合材料机理及其性能研究. 长沙: 国防科学技术大学硕士学位论文, 2011.
[70] SUZUKI T, NOMURA N, YOSHIMI K, et al. 過共晶組織を有するMo-ZrC in-situ 複合材料の高温強度と室温靭性. [in Japanese] 日本金屬學會誌, 2000, 64(11): 1082–1088.
[71] GENDRE M, MA?TRE A, TROLLIARD G. Synthesis of zirconium oxycarbide (ZrCxOy) powders: Influence of stoichiometry on densification kinetics during spark plasma sintering and on mechanical properties. Journal of the European Ceramic Society, 2011, 31: 2377–2385.
[72] ZHAO L Y, JIA D C, WANG Y J, et al. ZrC-ZrB2 matrix composites with enhanced toughness prepared by reactive hot pressing. Scripta Materialia, 2010, 63(8): 887–890.
[73] ZHU Y, WANG S, CHEN H, et al. Microstructure and mechanical properties of Cf/ZrC composites fabricated by reactive melt infiltration at relatively low temperature. Ceramics International, 2013, 39(8): 9085–9089.
[74] WANG Z, DONG S, ZHANG X, et al. Fabrication and properties of Cf/SiC-ZrC composites. Journal of the American Ceramic Society, 2008, 91(10): 3434–3436.
[75] CHEN S, ZHANG Y, ZHANG C, et al. Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis route. Materials and Design, 2013, 46: 497–502.
[76] ZHAO D, ZHANG C R, HU H F, et al. Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment. Composites Science and Technology, 2011, 71(11): 1392–1396.
[77] http://www.ultramet.com/ceramic_protective_coatings.html# refractory.
[78] FENG B, LI H, ZHANG Y, et al. Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C-SiC-ZrC composites. Corrosion Science, 2014, 82: 27–35.
[79] PAUL A, JAYASEELAN D D, VENUGOPAL S, et al. UHTC composites for hypersonic applications. American Ceramic Society Bulletin, 2012, 91(1): 22B–29B.
[80] ZENG Y, XIONG X, LI G et al. Effect of fiber architecture and density on the ablation behavior of carbon/carbon composites modified by Zr-Ti-C. Carbon, 2013, 63: 92–100.