[1] |
KOJIMA A, TESHIMA K, SHIRAI Y, et al.Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 2009, 131(17): 6050-6051.
|
[2] |
IM J H, LEE C R, LEE J W, et al.6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale, 2011, 3(10): 4088-4093.
|
[3] |
LEE M M, TEUSCHER J, MIYASAKA T, et al.Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science, 2012, 338(6107): 643-647.
|
[4] |
BURSCHKA J, PELLET N, MOON S, et al.Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 2013, 499(7458): 316-319.
|
[5] |
LIU M, JOHNSTON M B, SNAITH H J.Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature, 2013, 501(7467): 395-398.
|
[6] |
GRÄTZEL M. The light and shade of perovskite solar cells. Nat. Mater., 2014, 13(9): 838-842.
|
[7] |
ZHOU H, CHEN Q, LI G, et al.Interface engineering of highly efficient perovskite solar cells. Science, 2014, 345(6196): 542-546.
|
[8] |
NIE W, TSAI H, ASADPOUR R, et al.High-efficiency solution- processed perovskite solar cells with millimeter-scale grains. Science, 2015, 347(6221): 522-525.
|
[9] |
YANG W S, NOH J H, JEON N J, et al.High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science, 2015, 348(6240): 1234-1237.
|
[10] |
YANG W S, PARK B W, JUNG E H, et al.Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science, 2017, 356(6345): 1376-1379.
|
[11] |
VELDHUIS S A, BOIX P P, YANTARA N, et al.Perovskite materials for light-emitting diodes and lasers. Advanced Materials, 2016, 28(32): 6804-6834.
|
[12] |
TAN Z K, MOGHADDAM R S, LAI M L, et al.Bright light-emitting diodes based on organometal halide perovskite. Nature Nanotechnology, 2014, 9: 687-692.
|
[13] |
LI G, TAN Z K, DI D, et al.Efficient light-emitting diodes based on nanocrystalline perovskite in a dielectric polymer matrix. Nano Letters, 2015, 15: 2640-2644.
|
[14] |
JARAMILLOQUINTERO O A, SANCHEZ R S, RINCON M, et al.Bright visible-infrared light emitting diodes based on hybrid halide perovskite with spiro-OMeTAD as a hole-injecting layer. Journal of Physical Chemistry Letters, 2015, 6: 1883-1890.
|
[15] |
XING J, YAN F, ZHAO Y, et al.High-efficiency light-emitting diodes of organometal halide perovskite amorphous nanoparticles. ACS Nano, 2016, 10: 6623-6630.
|
[16] |
WANG J, WANG N, JIN Y, et al.Interfacial control toward efficient and low-voltage perovskite light-emitting diodes. Advanced Materials, 2015, 27(16): 2311-2316.
|
[17] |
CHO H, JEONG S H, PARK M H, et al.Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science, 2015, 350(6265): 1222-1225.
|
[18] |
DOU L, WONG A B, YU Y, et al.Atomically thin two-dimensional organic-inorganic hybrid perovskites. Science, 2015, 349(6255): 1518-1521.
|
[19] |
SADHANALA A, AHMAD S, ZHAO B, et al.Blue-green color tunable solution processable organolead chloride-bromide mixed halide perovskites for optoelectronic applications. Nano Letters, 2015, 15: 6095-6101.
|
[20] |
KIM Y H, CHO H, HEO J H, et al.Multicolored organic/inorganic hybrid perovskite light-emitting diodes. Advanced Materials, 2015, 27(7): 1248-1254.
|
[21] |
HOYE R L Z, CHUA M R, MUSSELMAN K P, et al. Enhanced performance in fluorene-free organometal halide perovskite light-emitting diodes using tunable, low electron affinity oxide electron injectors. Advanced Materials, 2015, 27(8): 1414-1419.
|
[22] |
YU J C, KIM D B, BAEK G, et al.High-performance planar perovskite optoelectronic devices: a morphological and interfacial control by polar solvent treatment. Advanced Materials, 2015, 27(23): 3492-3500.
|
[23] |
YUAN M, QUAN L N, COMIN R, et al.Perovskite energy funnels for efficient light-emitting diodes. Nature Nanotechnology, 2016, 11(10): 872-877.
|
[24] |
WANG N, CHENG L, GE R, et al.Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells. Nature Photonics, 2016, 10: 699-704.
|
[25] |
XIAO Z, KERNER R A, ZHAO L, et al.Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites. Nature Photonics, 2017, 11: 108-115.
|
[26] |
LIAO Q, HU K, ZHANG H, et al.Perovskite microdisk microlasers self-assembled from solution. Advanced Materials, 2015, 27(22): 3405-3410.
|
[27] |
SALIBA M, WOOD S M, PATEL J B, et al.Structured organic- inorganic perovskite toward a distributed feedback laser. Advanced Materials, 2016, 28(5): 923-929.
|
[28] |
AHMADI M, WU T, HU B. A review on organic-inorganic halide perovskite photodetectors: device engineering and fundamental physics. Advanced Materials, 2017, 29(41): 1605242-1-24.
|
[29] |
DONG R, FANG Y, CHAE J, et al.High-gain and low-driving- voltage photodetectors based on organolead triiodide perovskites. Advanced Materials, 2015, 27(11): 1912-1918.
|
[30] |
LIN Q, ARMIN A, BURN P L, et al.Filterless narrowband visible photodetectors. Nature Photonics, 2015, 9(10): 687-694.
|
[31] |
CHEN H W, SAKAI N, JENA A K, et al.A switchable high-sensitivity photodetecting and photovoltaic device with perovskite absorber. Journal of Physical Chemistry Letters, 2015, 6(9): 1773-1779.
|
[32] |
SAIDAMINOV M I, VALERIO A, RICCARDO C, et al. Planar- integrated single-crystalline perovskite photodetectors. Nature Communication, 2015, 6: 8724-1-7.
|
[33] |
MACULAN G, SHEIKH A D, ABDELHADY A L, et al.CH3NH3PbCl3 single crystals: inverse temperature crystallization and visible-blind UV-photodetector. Journal of Physical Chemistry Letters, 2015, 6(19): 3781-3786.
|
[34] |
YAN K, PENG M, YU X, et al.High-performance perovskite memristor based on methyl ammonium lead halides. Journal of Materials Chemistry C, 2016, 4(7): 1375-1381.
|
[35] |
GU C, LEE J S.Flexible hybrid organic-inorganic perovskite memory. ACS Nano, 2016, 10(5): 5413-5418.
|
[36] |
KULBAK M, GUPTA S, KEDEM N, et al.Cesium enhances long-term stability of lead bromide perovskite-based solar cells. Journal of Physical Chemistry Letters, 2016, 7(1): 167-172.
|
[37] |
KULBAK M, CAHEN D, HODES G.How important is the organic part of lead halide perovskite photovoltaic cells? efficient CsPbBr3 cells. Journal of Physical Chemistry Letters, 2015, 6(13): 2452-2456.
|
[38] |
PROTESESCU L, YAKUNIN S, BODNARCHUK M I, et al.Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Letters, 2015, 15(6): 3692-3696.
|
[39] |
WU Y, WEI Y, HUANG Y, et al.Capping CsPbBr3 with ZnO to improve performance and stability of perovskite memristors. Nano Research, 2017, 10(5): 1584-1594.
|
[40] |
LIU D, LIN Q, ZANG Z, et al.Flexible all-inorganic perovskite CsPbBr3 nonvolatile memory device. ACS Applied Materials & Interfaces, 2017, 9: 6171-6176.
|
[41] |
HUO C, LIU X, SONG X, et al.Field-effect transistors based on Van-Der-Waals-grown and dry-transferred all-inorganic perovskite ultrathin platelets. Journal of Physical Chemistry Letters, 2017, 8: 4785-4792.
|
[42] |
CHANG X, LI W, ZHU L, et al.Carbon-based CsPbBr3 perovskite solar cells: all-ambient processes and high thermal stability. ACS Applied Materials & Interfaces, 2016, 8: 33649-33655.
|
[43] |
PANIGRAHI S, JANA S, CALMEIRO T, et al.Imaging the anomalous charge distribution inside CsPbBr3 perovskite quantum dots sensitized solar cells. ACS Nano, 2017, 11: 10214-10221.
|
[44] |
CHEN C, LIN H, CHIANG K, et al. All-vacuum-deposited stoichiometrically balanced inorganic cesium lead halide perovskite solar cells with stabilized efficiency exceeding 11%. Advanced Materials, 2017, 29(12): 1605290-1-7.
|
[45] |
ZENG Q S, ZHANG X Y, FENG X L, et al. Polymer-passivated inorganic cesium lead mixed-halide perovskites for stable and efficient solar cells with high open-circuit voltage over 1.3 V. Advanced Materials, 2018, 30(9): 1705393-1-9.
|
[46] |
LI X, YU D, CHEN J, et al.Constructing fast carrier tracks into flexible perovskite photodetectors to greatly improve responsivity. ACS Nano, 2017, 11(2): 2015-2023.
|
[47] |
XUE J, GU Y, SHAN Q, et al.Constructing Mie-scattering porous interface-fused perovskite films to synergistically boost light harvesting and carrier transport. Angewandte Chemie International Edition, 2017, 56(19): 5232-5236.
|
[48] |
YANG B, ZHANG F, CHEN J, et al. Ultrasensitive and fast all-inorganic perovskite-based photodetector via fast carrier diffusion. Advanced Materials, 2017, 29(40): 1703758-1-8.
|
[49] |
YANG T, ZHENG Y, DU Z, et al.Superior photodetectors based on all-inorganic perovskite CsPbI3 nanorods with ultrafast response and high stability. ACS Nano, 2018, 12(2): 1611-1617.
|
[50] |
HUANG C Y, ZOU C, MAO C, et al.CsPbBr3 perovskite quantum dot vertical cavity lasers with low threshold and high stability. ACS Photonics, 2017, 4(9): 2281-2289.
|
[51] |
ZHANG L, YANG X, JIANG Q, et al.Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes. Nature Communication, 2017, 8: 15640.
|
[52] |
CHO H, KIM Y H, WOLF C, et al. Improving the stability of metal halide perovskite materials and light-emitting diodes. Advanced Materials, 2018: 1704587-1-24.
|
[53] |
LI X, CAO F, YU D, et al. All inorganic halide perovskites nanosystem: synthesis, structural features, optical properties and optoelectronic applications. Small, 2017, 13(9): 1603996-1-24.
|
[54] |
HE X, QIU Y, YANG S. Fully-inorganic trihalide perovskite nanocrystals: a new research frontier of optoelectronic materials. Advanced Materials, 2017, 29(32): 1700775-1-27.
|
[55] |
LI J, SHAN X, BADE S G R, et al. Single-layer halide perovskite light-emitting diodes with sub-band gap turn-on voltage and high brightness. Journal of Physical Chemistry Letters, 2016, 7(20): 4059-4066.
|
[56] |
LY K T, CHENCHENG R W, LIN H W, et al.Near-infrared organic light-emitting diodes with very high external quantum efficiency and radiance. Nature Photonics, 2017, 11: 63-68.
|
[57] |
SHIRASAKI Y, SUPRAN G J, BAWENDI M G, et al.Emergence of colloidal quantum-dot light-emitting technologies. Nature Photonics, 2013, 7(1): 13-23.
|
[58] |
SONG J, LI J, LI X, et al.Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3). Advanced Materials, 2015, 27(44): 7162-7167.
|
[59] |
LI J, XU L, WANG T, et al. 50-fold EQE improvement up to 6.27% of solution-processed all-inorganic perovskite CsPbBr3 QLEDs via surface ligand density control. Advanced Materials, 2017, 29(5): 1603885-1-9.
|
[60] |
PAN J, QUAN L N, ZHAO Y, et al.Highly efficient perovskite- quantum-dot light-emitting diodes by surface engineering. Advanced Materials, 2016, 28(39): 8718-8725.
|
[61] |
TAN Y, ZOU Y, WU L, et al.Highly luminescent and stable perovskite nanocrystals with octylphosphonic acid as ligand for efficient light emitting diodes. ACS Applied Materials & Interfaces, 2018, 10(4): 3784-3792.
|
[62] |
QIN C, MATSUSHIMA T, SANDANAYAKA A S D, et al. Centrifugal-coated quasi-two-dimensional perovskite CsPb2Br5 films for efficient and stable light-emitting diodes. Journal of Physical Chemistry Letters, 2017, 47(21): 5415-5421.
|
[63] |
CHIBA T, HOSHI K, PU Y J, et al.High-efficiency perovskite quantum-dot light-emitting devices by effective washing process and interfacial energy level alignment. ACS Applied Materials & Interfaces, 2017, 9: 18054-18060.
|
[64] |
ZOU C, HUANG C Y, SANEHIRA E M, et al. Highly stable cesium lead iodide perovskite quantum dot light-emitting diodes. Nanotechnology, 2017, 28(45): 455201-1-7.
|
[65] |
XU J, HUANG W, LI P, et al. Imbedded nanocrystals of CsPbBr3 in Cs4PbBr6: kinetics, enhanced oscillator strength,application in light-emitting diodes. Advanced Materials, 2017, 29(43): 1703703-1-10.
|
[66] |
LE Q V, PARK M, SOHN W, et al.Investigation of energy levels and crystal structures of cesium lead halides and their application in full-color light-emitting diodes. Advanced Electronic Materials, 2017, 3(1): 1600448.
|
[67] |
SUH Y H, KIM T, CHOI J W, et al.High-performance CsPbX3 perovskite quantum dot light emitting devices via solid-state ligand exchange. ACS Applied Nano Materials, 2018, 1(2): 488-496.
|
[68] |
WANG Z, LUO Z, ZHAO C, et al.Efficient and stable pure green all-inorganic perovskite CsPbBr3 light-emitting diodes with a solution-processed NiOx interlayer. Journal of Physical Chemistry C, 2017, 121: 28132-28138.
|
[69] |
ZHANG X, WANG W, XU B, et al.Thin film perovskite light-emitting diode based on CsPbBr3, powders and interfacial engineering. Nano Energy, 2017, 37: 40-45.
|
[70] |
HU Y, WANG Q, SHI Y L, et al.Vacuum-evaporated all-inorganic cesium lead bromine perovskites for high-performance light-emitting diodes. Journal of Materials Chemistry C, 2017, 5(32): 8144-8149.
|
[71] |
CHO H, WOLF C, KIM J S, et al. High-efficiency solution- processed inorganic metal halide perovskite light-emitting diodes. Advanced Materials, 2017, 29(31): 1700579-1-8.
|
[72] |
YANTARA N, BHAUMIK S, YAN F, et al.Inorganic halide perovskites for efficient light-emitting diodes. Journal of Physical Chemistry Letters, 2015, 6(21): 4360-4364.
|
[73] |
YAN F N, WEI J N, JAMALUDIN N F, et al.Enhanced coverage of all-inorganic perovskite CsPbBr3 through sequential deposition for green light-emitting diodes. Energy Technology, 2017, 5: 1859-1865.
|
[74] |
YAO E P, YANG Z, MENG L, et al. High-brightness blue and white LEDs based on inorganic perovskite nanocrystals and their composites. Advanced Materials, 2017, 29(23): 1606859-1-7.
|
[75] |
NG Y F, JAMALUDIN N F, YANTARA N, et al.Rapid crystallization of all-inorganic CsPbBr3 perovskite for high-brightness light-emitting diodes. ACS Omega, 2017, 2(6): 2757-2764.
|
[76] |
JIN F, ZHAO B, CHU B, et al.Morphology control towards bright and stable inorganic halide perovskite light-emitting diodes. Journal of Materials Chemistry C, 2018, 6: 1573-1578.
|
[77] |
LING Y, TIAN Y, WANG X, et al.Enhanced optical and electrical properties of polymer-assisted all-inorganic perovskites for light-emitting diodes. Advanced Materials, 2016, 28: 8983-8989.
|
[78] |
SONG L, GUO X, HU Y, et al.Efficient inorganic perovskite light-emitting diodes with polyethylene glycol passivated ultrathin CsPbBr3 films. Journal of Physical Chemistry Letters, 2017, 8: 4148-4154.
|
[79] |
ZHANG X, XU B, WANG W, et al.Plasmonic perovskite light-emitting diodes based on Ag-CsPbBr3 system. ACS Applied Materials & Interfaces, 2017, 9(5): 4926-4931.
|
[80] |
YU J C, LEE A Y, KIM D B, et al.Enhancing the performance and stability of perovskite nanocrystal light-emitting diodes with a polymer matrix. Advanced Materials Technologies, 2017, 2(6): 1700003.
|
[81] |
YU F X, ZHANG Y, XIONG Z Y, et al.Full coverage all-inorganic cesium lead halide perovskite film for high-efficiency light-emitting diodes assisted by 1,3,5-tri(m-pyrid-3-yl-phenyl) benzene. Organic Electronics, 2017, 50: 480-484.
|
[82] |
WU C, ZOU Y, WU T, et al. Improved performance and stability of all-inorganic perovskite light-emitting diodes by antisolvent vapor treatment. Advanced Functional Materials, 2017, 27(28): 1700338-1-7.
|
[83] |
NG Y F, KULKARNI S A, PARIDA S, et al.Highly efficient Cs-based perovskite light-emitting diodes enabled by energy funnelling. Chemical Communications, 2017, 53(88): 12004-12007.
|
[84] |
ZHANG X, XU B, ZHANG J, et al.All-inorganic perovskite nanocrystals for high-efficiency light emitting diodes: dual-phase CsPbBr3-CsPb2Br5 composites. Advanced Functional Materials, 2016, 26: 4595-4600.
|
[85] |
ZHANG X, LIN H, HUANG H, et al.Enhancing the brightness of cesium lead halide perovskite nanocrystal based green light-emitting devices through the interface engineering with perfluorinated lonomer. Nano Letters, 2016, 16(2): 1415-1420.
|
[86] |
ZHANG X, CAO W, WANG W, et al.Efficient light-emitting diodes based on green perovskite nanocrystals with mixed-metal cations. Nano Energy, 2016, 30: 511-516.
|
[87] |
MIR W J, JAGADEESWARARAO M, DAS S, et al.Colloidal Mn-doped cesium lead halide perovskite nanoplatelets. ACS Energy Letters, 2017, 2: 537-543.
|
[88] |
SHAI X, ZUO L, SUN P, et al.Efficient planar perovskite solar cells using halide Sr-substituted Pb perovskite. Nano Energy, 2017, 36: 213-222.
|
[89] |
BEGUM R, PARIDA M R, ABDELHADY A L, et al.Engineering interfacial charge transfer in CsPbBr3 perovskite nanocrystals by heterovalent doping. Journal of the American Chemical Society, 2017, 139: 731-737.
|
[90] |
ZOU S, LIU Y, LI J, et al.Stabilizing cesium lead halide perovskite lattice through Mn(II) substitution for air-stable light-emitting diodes. Journal of the American Chemical Society, 2017, 139: 11443-11450.
|
[91] |
YAO J, GE J, HAN B N, et al.Ce3+-doping to modulate photoluminescence kinetics for efficient CsPbBr3 nanocrystals based light-emitting diodes. Journal of the American Chemical Society, 2018, 140(10): 3626-3634.
|
[92] |
JELLICOE T C, RICHTER J M, GLASS H F J, et al. Synthesis and optical properties of lead-free cesium tin halide perovskite nanocrystals. Journal of the American Chemical Society, 2016, 138(9): 2941-2944.
|
[93] |
CHEN L J, LEE C R, CHUANG Y J, et al.Synthesis and optical properties of lead-free cesium tin halide perovskite quantum rods with high-performance solar cell application. Journal of Physical Chemistry Letters, 2016, 7: 5028-5035.
|
[94] |
YANG B, CHEN J, HONG F, et al.Lead-free, air-stable all-inorganic cesium bismuth halide perovskite nanocrystals. Angewandte Chemie International Edition, 2017, 56: 12471-12475.
|
[95] |
TONG X, KONG W, WANG Y, et al.High-performance red light photodetector based on lead-free bismuth halide perovskite film. ACS Applied Materials & Interfaces, 2017, 9(22): 18977-18985.
|
[96] |
WANG A, GUO Y, MUHAMMAD F, et al.Controlled synthesis of lead-free cesium tin halide perovskite cubic nanocages with high stability. Chemistry of Materials, 2017, 29: 6493-6501.
|
[97] |
ZHANG J, YANG Y, DENG H, et al.High quantum yield blue emission from lead-free inorganic antimony halide perovskite colloidal quantum dots. ACS Nano, 2017, 11: 9294-9302.
|
[98] |
LENG M, YANG Y, ZENG K, et al. All-inorganic bismuth-based perovskite quantum dots with bright blue photoluminescence and excellent stability. Advanced Functional Materials, 2018, 28: 1704446-1-11.
|
[99] |
SHI Z, LI Y, ZHANG Y, et al.High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure. Nano Letters, 2016, 17(1): 313-321.
|
[100] |
SHAN Q, LI J, SONG J, et al.All-inorganic quantum-dot light-emitting diodes based on perovskite emitters with low turn-on voltage and high humidity stability. Journal of Materials Chemistry C, 2017, 5(18): 4565-4570.
|
[101] |
ZHUANG S, MA X, HU D, et al.Air-stable all inorganic green perovskite light emitting diodes based on ZnO/CsPbBr3/NiO heterojunction structure. Ceramics International, 2018, 44(5): 4685-4688.
|
[102] |
SHI Z, LI S, LI Y, et al.Strategy of solution-processed all-inorganic heterostructure for humidity/temperature-stable perovskite quantum dot light-emitting diodes. ACS Nano, 2018, 12(2): 1462-1472.
|