Applying an Organic Phosphine Complex Additive to Preparing α-FeOOH by Alkaline Methods

Journal of Inorganic Materials

• Research Paper • Previous Articles Next Articles

Applying an Organic Phosphine Complex Additive to Preparing α-FeOOH by Alkaline Methods

GU Xu-Peng; CHEN Tong-Yun; WU Peng-Sheng

Chemical Departmeot of East China Institute of Metallurgy; Anhui Maanshan 243002; China

Received:2000-09-01 Revised:2000-10-09 Published:2001-09-20 Online:2001-09-20

Abstract

Abstract: α-FeOOH was prepared by alkaline methods with an organic phosphine complex additive center. γ-Fe₂O₃ magnetic powders were made from α-FeOOH by releasing water, reducing, and oxidizing. It was found that the effects of the additives on the rate of oxidation and the topography of α-FeOOH are obvious. When the amount of the complex additive is 1.0×10^-3g/L and R=5.0, magnetic-recording powders with high properties can be obtained.

Key words: additive, hydrated hydraferro, γ-Fe₂O₃ magnetic powder, preparation

CLC Number:

TF123

GU Xu-Peng,CHEN Tong-Yun,WU Peng-Sheng. Applying an Organic Phosphine Complex Additive to Preparing α-FeOOH by Alkaline Methods[J]. Journal of Inorganic Materials.

[1]	NI Xiaomeng, XU Fangxian, LIU Jingjing, ZHANG Shuai, GUO Huafei, YUAN Ningyi. Photovoltaic Performance of Sb₂(S,Se)₃ Film Enhanced by Addition of Formamidinesulfinic Acid [J]. Journal of Inorganic Materials, 2025, 40(4): 372-378.
[2]	ZHANG Jinghui, LU Xiaotong, MAO Haiyan, TIAN Yazhou, ZHANG Shanlin. Effect of Sintering Additives on Sintering Behavior and Conductivity of BaZr_0.1Ce_0.7Y_0.2O_3-_δ Electrolytes [J]. Journal of Inorganic Materials, 2025, 40(1): 84-90.
[3]	WEI Xiangxia, ZHANG Xiaofei, XU Kailong, CHEN Zhangwei. Current Status and Prospects of Additive Manufacturing of Flexible Piezoelectric Materials [J]. Journal of Inorganic Materials, 2024, 39(9): 965-978.
[4]	CHEN Qian, SU Haijun, JIANG Hao, SHEN Zhonglin, YU Minghui, ZHANG Zhuo. Progress of Ultra-high Temperature Oxide Ceramics: Laser Additive Manufacturing and Microstructure Evolution [J]. Journal of Inorganic Materials, 2024, 39(7): 741-753.
[5]	WANG Weiming, WANG Weide, SU Yi, MA Qingsong, YAO Dongxu, ZENG Yuping. Research Progress of High Thermal Conductivity Silicon Nitride Ceramics Prepared by Non-oxide Sintering Additives [J]. Journal of Inorganic Materials, 2024, 39(6): 634-646.
[6]	CHEN Tian, LUO Yuan, ZHU Liu, GUO Xueyi, YANG Ying. Organic-inorganic Co-addition to Improve Mechanical Bending and Environmental Stability of Flexible Perovskite Solar Cells [J]. Journal of Inorganic Materials, 2024, 39(5): 477-484.
[7]	DENG Shungui, ZHANG Chuanfang. MXene Multifunctional Inks: a New Perspective toward Printable Energy-related Electronic Devices [J]. Journal of Inorganic Materials, 2024, 39(2): 195-203.
[8]	WANG Yu, XIONG Hao, HUANG Xiaokun, JIANG Linqin, WU Bo, LI Jiansheng, YANG Aijun. Regulation of Low-dose Stannous Iso-octanoate for Two-step Prepared Sn-Pb Alloyed Perovskite Solar Cells [J]. Journal of Inorganic Materials, 2024, 39(12): 1339-1347.
[9]	CAI Kai, JIN Zhiwen. Photodetector Based on Two-dimensional Perovskite (PEA)₂PbI₄ [J]. Journal of Inorganic Materials, 2023, 38(9): 1069-1075.
[10]	MAO Aiqin, LU Wenyu, JIA Yanggang, WANG Ranran, SUN Jing. Flexible Piezoelectric Devices and Their Wearable Applications [J]. Journal of Inorganic Materials, 2023, 38(7): 717-730.
[11]	YUAN Jingkun, XIONG Shufeng, CHEN Zhangwei. Research Trends and Challenges of Additive Manufacturing of Polymer-derived Ceramics [J]. Journal of Inorganic Materials, 2023, 38(5): 477-488.
[12]	MA Tingting, WANG Zhipeng, ZHANG Mei, GUO Min. Performance Optimization of Ultra-long Stable Mixed Cation Perovskite Solar Cells [J]. Journal of Inorganic Materials, 2023, 38(12): 1387-1395.
[13]	FU Shi, YANG Zengchao, LI Jiangtao. Progress of High Strength and High Thermal Conductivity Si₃N₄ Ceramics for Power Module Packaging [J]. Journal of Inorganic Materials, 2023, 38(10): 1117-1132.
[14]	WANG Lukai, FENG Junzong, JIANG Yonggang, LI Liangjun, FENG Jian. Direct-ink-writing 3D Printing of Ceramic-based Porous Structures: a Review [J]. Journal of Inorganic Materials, 2023, 38(10): 1133-1148.
[15]	WU Dongjiang, ZHAO Ziyuan, YU Xuexin, MA Guangyi, YOU Zhulin, REN Guanhui, NIU Fangyong. Direct Additive Manufacturing of Al₂O₃-TiC_p Composite Ceramics by Laser Directed Energy Deposition [J]. Journal of Inorganic Materials, 2023, 38(10): 1183-1192.

Applying an Organic Phosphine Complex Additive to Preparing α-FeOOH by Alkaline Methods

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments