Preparation of Micro-arc Discharge Oxidized Coating on Hot-dip Aluminized Stainless Steel Sheet

Abstract

Abstract: A new method of surface treatment for austenitic stainless steel sheets was developed to improve their mechanical performance. An aluminium layer
was firstly formed on the surface of stainless steel by immersing the sheet into a 760℃ molten aluminium bath for 8 min. The aluminized stainless
steel sheet was then treated by micro-arc discharge oxidation. The structure of the resultant compound coating was analyzed by using X-ray diffraction,
scanning electron microscopy with energy dispersive spectrometer and Vickers micro-hardness tester. The results show that a ceramic coating composed mainly
of α-Al₂O₃ and γ-Al₂O₃ is formed on a medium intermetallic compound layer and the content of γ-Al₂O₃ is higher than that of α-Al₂O₃. The micro-hardness of the compound coating
shows a gradation from the coating surface (800HV) to the substrate (230HV) through the medium intermetallic compound layer (250～600HV).

Key words: austenitic stainless steel, hot-dip aluminium, micro-arc discharge oxidation, coating

CLC Number:

TG174

YANG Zhong-Shi,JIA Jian-Feng,TIAN Jun,HE De-Yan. Preparation of Micro-arc Discharge Oxidized Coating on Hot-dip Aluminized Stainless Steel Sheet[J]. Journal of Inorganic Materials.

[1]	LIU Chunfan, CHEN Ke, GE Fangfang, HUANG Qing. Research Progress on Lead-bismuth Eutectic Corrosion Resistant Coatings [J]. Journal of Inorganic Materials, 2026, 41(6): 775-786.
[2]	ZHAO Tongtong, DAI Jixiang, SU Cheng, SHI Yan, SHA Jianjun. Microstructure and Ablation Resistance of C/C Composites Modified by Hf-Si-based Coating-matrix Integrated Structure Fabricated by Reactive Melt Infiltration [J]. Journal of Inorganic Materials, 2026, 41(5): 583-594.
[3]	WANG Yuhe, LUO Yixiu, GUO Huiming, ZHANG Guangheng, ZHANG Siyan, SUN Luchao, WANG Jiemin, WANG Jingyang. First-principles Investigation of Elastic and Thermophysical Properties of High-entropy Rare-earth Oxide Thermal Barrier Coating Materials [J]. Journal of Inorganic Materials, 2026, 41(4): 445-454.
[4]	TIAN Hongwang, LUO Longfei, HU Chenglong, YAN Meng, PANG Shengyang, LI Jian, TANG Sufang. Facile Fabrication of Ceramic-resin Coatings on C/CA Composites for Oxidation Protection at Medium Temperatures [J]. Journal of Inorganic Materials, 2026, 41(3): 401-408.
[5]	LI Zexi, LU Wenjie, WANG Chao, ZHANG Lu, LI Shuti, GAO Fangliang. Two-dimensional GaN: Preparation Based on Liquid Metal Gallium and Photoelectric Properties [J]. Journal of Inorganic Materials, 2026, 41(3): 377-384.
[6]	LIANG Ruihui, ZHONG Xin, HONG Du, HUANG Liping, NIU Yaran, ZHENG Xuebin. High-temperature Water Vapor Corrosion Behaviors of Environmental Barrier Coatings with Yb₂O₃-modified Silicon Bond Layer [J]. Journal of Inorganic Materials, 2025, 40(4): 425-432.
[7]	HOU Jiaqi, CHEN Ruicong, ZENG Yaoying, ZHOU Lei, ZHANG Jiaping, FU Qiangang. Thermal Shock and Ablation Resistance of SiC Coating Repaired by Gaseous Silicon Infiltration [J]. Journal of Inorganic Materials, 2025, 40(2): 168-176.
[8]	YI Guogang, WU Yaoying, ZU Xihong. Non-solvent and Low-temperature Preparation of Porous Silicon-carbon Anodes for Enhanced Lithium Storage [J]. Journal of Inorganic Materials, 2025, 40(12): 1379-1386.
[9]	AI Yizhaotong, REN Jiulong, QIANG Linya, ZHANG Xiaozhen, YANG Kai, GAO Yanfeng. Friction and Wear Properties of Al₂O₃-GdAlO₃ (GAP) Amorphous Ceramic Coatings under High Load Capacity [J]. Journal of Inorganic Materials, 2025, 40(10): 1111-1118.
[10]	CAO Luhan, MENG Jia, XUE Yudong, SHENG Xiaochen, CUI Yuanyuan, LE Jun, SONG Lixin. Effect of SiC Transition Layer on Bonding Properties of MoSi₂-SABB Coating on SiC/SiC Ceramic Matrix Composites [J]. Journal of Inorganic Materials, 2025, 40(10): 1119-1128.
[11]	LI Xiaoxuan, FU Qiangang, WEN Zihao, YANG Jinshan, NI Dewei, ZHANG Jie, CHENG Yuan, LIU Yuxuan, CHU Yanhui, CAI Feiyan, WANG Jingyang, ZHANG Xinghong. Research Progress on Ultra-high Temperature Ceramic Structural Materials for Extreme Environments [J]. Journal of Inorganic Materials, 2025, 40(10): 1045-1078.
[12]	ZHOU Fan, TIAN Zhilin, LI Bin. Research Progress on Carbide Ultra-high Temperature Ceramic Anti-ablation Coatings for Thermal Protection System [J]. Journal of Inorganic Materials, 2025, 40(1): 1-16.
[13]	MA Wen, SHEN Zhe, LIU Qi, GAO Yuanming, BAI Yu, LI Rongxing. Preparation of Y₂O₃ Coating by Suspension Plasma Spraying and Its Resistance to Plasma Etching [J]. Journal of Inorganic Materials, 2024, 39(8): 929-936.
[14]	LI Jie, LUO Zhixin, CUI Yang, ZHANG Guangheng, SUN Luchao, WANG Jingyang. CMAS Corrosion Resistance of Y₃Al₅O₁₂/Al₂O₃ Ceramic Coating Deposited by Atmospheric Plasma Spraying [J]. Journal of Inorganic Materials, 2024, 39(6): 671-680.
[15]	FANG Guangwu, XIE Haoyuan, ZHANG Huajun, GAO Xiguang, SONG Yingdong. Progress of Damage Coupling Mechanism and Integrated Design Method for CMC-EBC [J]. Journal of Inorganic Materials, 2024, 39(6): 647-661.

Preparation of Micro-arc Discharge Oxidized Coating on Hot-dip Aluminized Stainless Steel Sheet

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments