Na3V2(PO4)2F3@V2O5-x复合材料的制备及储钠性能研究

doi:10.15541/jim20190058

无机材料学报 ›› 2019, Vol. 34 ›› Issue (10): 1097-1102.DOI: 10.15541/jim20190058 CSTR: 32189.14.10.15541/jim20190058

所属专题：离子电池材料

Na₃V₂(PO₄)₂F₃@V₂O_5-_x复合材料的制备及储钠性能研究

王家虎¹,王文馨¹,杜鹏¹,胡芳东¹,姜晓蕾¹(),杨剑²()

^1. 临沂大学化学化工学院, 临沂 276005
^2. 山东大学化学与化工学院, 济南 250000

收稿日期:2019-01-28 修回日期:2019-03-26 出版日期:2019-09-23 网络出版日期:2019-05-29
作者简介:王家虎(1998-), 男, 本科生. E-mail: 2909099985@qq.com
基金资助:
国家自然科学基金(21701079);山东省自然科学基金(ZR2017BB016);地方高校国家级大学生创新创业训练计划项目(201710452017);山东省本科教改项目(Z2018S006)

Synthesis of Na₃V₂(PO₄)₂F₃@V₂O_5-_x as Cathode Material for Sodium-ion Battery

WANG Jia-Hu¹,WANG Wen-Xin¹,DU Peng¹,HU Fang-Dong¹,JIANG Xiao-Lei¹(),YANG Jian²()

^1. School of Chemistry and Chemical Engineering, Linyi University, Linyi 276005, China
^2. School of Chemistry and Chemical Engineering, Shandong University, Jinan 250000, China

Received:2019-01-28 Revised:2019-03-26 Published:2019-09-23 Online:2019-05-29
Supported by:
National Natural Science Foundation of China(21701079);Shandong Provincial Natural Science Foundation(ZR2017BB016);Undergraduate Innovation and Entrepreneurship Training Program(201710452017);Undergraduate Education Reform Project of Shandong Province(Z2018S006)

摘要/Abstract

摘要：

当前制约钠离子电池发展的主要因素包括较低的能量/功率密度和较差的循环性能, 而在正极材料表面包覆含氧缺陷金属氧化物层, 可以有效提高材料的电子导电率, 保证高振实密度、能量密度和功率密度。本文通过温和的溶剂热反应制备Na₃V₂(PO₄)₂F₃纳米片前驱体并结合高温煅烧合成Na₃V₂(PO₄)₂F₃@V₂O_5-_x复合材料。其结构通过XRD、TEM、SEM、XPS和TGA测试进行表征。作为钠离子电池的正极材料, 展现了优异的循环性能和倍率性能。在0.2C倍率下, 首圈放电比容量为123 mAh?g ^-1, 循环140圈后容量保持在109 mAh?g ^-1。当电流密度提高至1C, 首圈放电比容量达到72 mAh?g ^-1, 充放电循环500圈后, 容量保持率高达84%。优异的电化学性能归因于材料表面包覆的具有丰富结构缺陷的无定型层, 有效提高了离子的扩散和电子导电率。此方法将有助于钠离子电池的实际应用。

关键词: 正极材料, 氧缺陷, 电化学性能, 钠离子电池

Abstract:

Low energy/power density and inferior cycling stability are bottlenecks to restrict the applications of sodium-ion batteries. Recently, coating the surface of cathode material by metal oxides containing oxygen vacancies, was regarded as an effective strategy to improve electrical conductivity and power/energy density. In this study, Na₃V₂(PO₄)₂F₃@V₂O_5-_x nanosheets were synthesized via hydrothermal strategy followed by heat treatment. X-ray diffraction, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis were applied to investigate the structure of Na₃V₂(PO₄)₂F₃@V₂O_5-_x. As a cathode of sodium- ion batteries, Na₃V₂(PO₄)₂F₃@V₂O_5-_x delivers excellent cycling stability and rate capability. It exhibits an initial discharge capacity of 123 mAh?g ^-1 at 0.2C, and a discharge capacity of 109 mAh?g ^-1 after 140 cycles. At 1C, its initial reversible capacity is 72 mAh?g ^-1, which remains 84% after 500 cycles. The outstanding electrochemical property could be ascribed to its enhanced sodium-diffusion and improved electronic conductivity induced by disordered surface coating. Furthermore, it encourages more investigations into practical sodium-ion battery applications.

Key words: cathode material, oxygen deficient, electrochemical performance, sodium-ion battery

中图分类号:

O646

王家虎, 王文馨, 杜鹏, 胡芳东, 姜晓蕾, 杨剑. Na₃V₂(PO₄)₂F₃@V₂O_5-_x复合材料的制备及储钠性能研究[J]. 无机材料学报, 2019, 34(10): 1097-1102.

WANG Jia-Hu, WANG Wen-Xin, DU Peng, HU Fang-Dong, JIANG Xiao-Lei, YANG Jian. Synthesis of Na₃V₂(PO₄)₂F₃@V₂O_5-_x as Cathode Material for Sodium-ion Battery[J]. Journal of Inorganic Materials, 2019, 34(10): 1097-1102.

图/表 5

图1 NVPF与NVPF@VO样品的XRD图谱

Fig. 1 XRD patterns of NVPF and NVPF@VO samples

图2 NVPF@VO样品的(a)TEM, (b)SEM, (c)HRTEM照片以及(d)NVPF与NVPF@VO的红外谱图

Fig. 2 (a) TEM, (b) SEM, (c) HRTEM images of NVPF@VO, and (d) FT-IR spectra of NVPF and NVPF@VO

图3 (a) NVPF@VO的V元素XPS精细图谱, (b) NVPF@VO在不同溅射时间下的V元素XPS精细图谱, (c)不同溅射时间下V5+/V4+的摩尔比, 以及(d) NVPF@VO在空气中的热重曲线, 升温速率为2 ℃?min-1

Fig. 3 (a) XPS spectrum of V2p of NVPF@VO, (b) XPS spectra of V2p of NVPF@VO sputtered by Ar+ plasmon for different time, (c) mole ratio of V5+/V4+ varied with the sputtering time, and (d) TG curve of NVPF@VO measured at a heating rate of 2 ℃?min-1 in air

图4 作为钠离子电池正极材料: (a)在0.2C下NVPF的充放电曲线; (b)在0.2C 下NVPF@VO的充放电曲线; (c)NVPF与NVPF@VO在0.2C下的循环性能图; (d)NVPF与NVPF@VO的倍率性能图; (e)NVPF@VO和NVPF在1C下的循环性能图

Fig. 4 NVPF@VO and NVPF as a cathode material for sodium-ion batteries: charge/discharge profiles of (a) NVPF and (b) NVPF@VO at 0.2C, (c) cycling performance and (d) rate capacity of NVPF and NVPF@VO, and (e) long cycling performances of NVPF@VO and NVPF at 1C

图5 (a)NVPF与NVPF@VO的交流阻抗谱图及对应的等效电路图, (b)低频区Zre与ω-1/2之间的关系曲线

Fig. 5 (a) EIS spectra and (b) relationship between the Zre and ω-1/2 in the low frequency region of NVPF and NVPF@VO

参考文献 32

[1]	XIAO N, PAN Y, SONG Y ,et al. Electrochemical behavior of Sb-Si nanocomposite thin films as anode materials for sodium-ion batteries. Journal of Inorganic Materials, 2018,33(5):494-500.
[2]	TANG W J, WANG X L, XIE D , et al.Hollow metallic 1T MoS₂ arrays grown on carbon cloth: a freestanding electrode for sodium ion batteries. Journal of Materials Chemistry A, 2018,6(37):18318-18324.
[3]	QI Y, MU L, ZHAO J ,et al. Multiscale grapheme-based materials for applications in sodium ion batteries. Advanced Energy Materials, 2019,9(8):1803342.
[4]	SU D W, WANG G X . Single-crystalline bilayered V₂O₅ nanobelts for high-capacity sodium-ion batteries. ACS Nano, 2013,7(12):11218-11226.
[5]	LI P, JEONG J Y, JIN B J ,et al. Vertically oriented MoS₂ with spatially controlled geometry on nitrogenous graphene sheets for high-performance sodium-ion batteries. Advanced Energy Materials, 2018,8(19):1703300.
[6]	ZHONG X, YANG Z Z, JIANG Y ,et al. Carbon-coated Na₃V₂(PO₄)₃ anchored on freestanding graphite foam for high-performance sodium-ion cathodes. ACS Applied Materials & Interfaces, 2016,8(47):32360-32365.
[7]	KIM D J, HERMANN K R, PROKOFJEVS A ,et al. Redox-active macrocycles for organic rechargeable batteries. Journal of the American Chemical Society, 2017,139(19):6635-6643.
[8]	SHAKOOR R A, SEO D H, KIM H ,et al.A combined first principles and experimental study on Na₃V₂(PO₄)₂F₃ for rechargeable Na batteries. Journal of Materials Chemistry, 2012,22(38):20535-20541.
[9]	ZHANG J, LIU W, HU H ,et al. An advanced blackberry-shaped Na₃V₂(PO₄)₃ cathode: assists in high-rate performance and long-life stability. Electrochimica Acta, 2018,292:736-741.
[10]	ZHU C, FU Y, YU Y ,et al. Designed nanoarchitectures by electrostatic spray deposition for energy storage. Advanced Materials, 2019,31(1):1803408.
[11]	SHEN C, LONG H, WANG G C ,et al. Na₃V₂(PO₄)₂F₃@C dispersed within carbon nanotube frameworks as a high tap density cathode for high-performance sodium-ion batteries. Journal of Materials Chemistry A, 2018,6(14):6007-6014.
[12]	BIANCHINI M, BRISSET N, FAUTH F ,et al. Na₃V₂(PO₄)₂F₃ revisited: a high-resolution diffraction study. Chemistry of Materials, 2014,26(14):4238-4247.
[13]	ZHAO J, GAO Y, LIU Q ,et al. High rate capability and enhanced cyclability of Na₃V₂(PO₄)₂F₃ cathode by inβsitu coating of carbon nanofibers for sodium-ion battery applications. Chemistry-A European Journal, 2018,24(12):2913-2919.
[14]	WANG H L, YANG Y, LIANG Y Y ,et al. LiMn₁-_xFe_xPO₄ nanorods grown on graphene sheets for ultrahigh-rate-performance lithium ion batteries. Angewandte Chemie International Edition, 2011,50(32):7364-7368.
[15]	ZHANG Y, GUO S R, XU H Y . Synthesis of uniform hierarchical Na₃V_1.95Mn_0.05(PO₄)₂F₃@C hollow microspheres as a cathode material for sodium-ion batteries. Journal of Materials Chemistry A, 2018,6(10):4525-4534.
[16]	YI H M, LING M X, XU W B ,et al. VSC-doping and VSU-doping of Na₃V₂-_xTi_x(PO₄)₂F₃ compounds for sodium ion battery cathodes: analysis of electrochemical performance and kinetic properties. Nano Energy, 2018,47:340-352.
[17]	ZHUO H T, WANG X Y, TANG A P ,et al. The preparation of NaV₁-_xCr_xPO₄F cathode materials for sodium-ion battery.Journal of Power Sources, 2006,160:698-703.
[18]	JIANG T, CHEN G, LI A ,et al. Sol-Gel preparation and electrochemical properties of Na₃V₂(PO₄)₂F₃/C composite cathode material for lithium ion batteries.Journal of Alloys and Compounds, 2009,478:604-607.
[19]	LIU Q, WANG D, YANG X ,et al. Carbon-coated Na₃V₂(PO₄)₂F₃ nanoparticles embedded in a mesoporous carbon matrix as a potential cathode material for sodium-ion batteries with superior rate capability and long-term cycle life.Journal of Materials Chemistry A, 2015,3(43):21478-21485.
[20]	DOMINKO R, BELE M, GABERSCEK M ,et al. Impact of the carbon coating thickness on the electrochemical performance of LiFePO₄/C composites.Journal of The Electrochemical Society, 2005,152(3):A607-A610.
[21]	XIA X H, DENG S J, XIE D ,et al. Boosting sodium ion storage by anchoring MoO₂ on vertical graphene arrays.Journal of Materials Chemistry A, 2018,6(32):15546-15552.
[22]	JIANG X L, XU H Y, MAO H Z , et al.Surface-disordered and oxygen-deficient LiTi₂-_xMn_x(PO₄-_y)₃ nanoparticles for enhanced lithium-ion storage. Journal of Power Sources, 2016,320:94-103.
[23]	BIANCHINI M, XIAO P H, WANG Y , et al.Additional sodium insertion into polyanionic cathodes for higher-energy Na-ion batteries.Advanced Energy Materials, 2017,7(18):1700514.
[24]	ZHU C B, WU C, CHEN C C , et al.A high power-high energy Na₃V₂(PO₄)₂F₃ sodium cathode: investigation of transport parameters, rational design and realization.Chemistry of Materials, 2017,29(12):5207-5215.
[25]	CAI Y S, CAO X X, LUO Z G , et al.Caging Na₃V₂(PO₄)₂F₃ microcubes in cross-linked graphene enabling ultrafast sodium storage and long-term cycling.Advanced Science, 2018,5:1800680.
[26]	GUO J Z, WANG P F, WU X L , et al.High-energy/power and low-temperature cathode for sodium-ion batteries: in situ XRD study and superior full-cell performance.Advanced Materials, 2017,29(12):1701968.
[27]	JIN H, DONG J, UCHAKER E , et al.Three dimensional architecture of carbon wrapped multilayer Na₃V₂O₂(PO₄)₂F nanocubes embedded in graphene for improved sodium ion batteries.Journal of Materials Chemistry A, 2015,3(34):17563-17568.
[28]	CHEN L, JIANG X L, WANG N ,et al. Surface-amorphous and oxygen-deficient Li₃VO₄-_δ as a promising anode material for lithium- ion batteries.Advanced Science, 2015,2(9):1500090.
[29]	RAJU V, RAINS J, GATES C , et al.Superior cathode of sodium- ion batteries: orthorhombic V₂O₅ nanoparticles generated in nanoporous carbon by ambient hydrolysis deposition.Nano letters, 2014,14(7):4119-4124.
[30]	LIU Z, HU Y Y, DUNSTAN M T , et al.Local structure and dynamics in the Na ion battery positive electrode material Na₃V₂(PO₄)₂F₃. Chemistry of Materials, 2014,26(8):2513-2521.
[31]	SONG W, CAO X, WU Z ,et al. Investigation of the sodium ion pathway and cathode behavior in Na₃V₂(PO₄)₂F₃ combined via a first principles calculation.Langmuir, 2014,30(41):12438-12446.
[32]	DENG C, ZHANG S, YANG S Y ,et al. Synthesis and characterization of Li₂Fe_0.97M_0.03SiO₄(M=Zn ²+, Cu ²+, Ni ²+) cathode materials for lithium ion batteries.Journal of Power Sources , 2011,196:386-392.

Na₃V₂(PO₄)₂F₃@V₂O_5-_x复合材料的制备及储钠性能研究

Synthesis of Na₃V₂(PO₄)₂F₃@V₂O_5-_x as Cathode Material for Sodium-ion Battery

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 5

参考文献 32

相关文章 15

编辑推荐

Metrics

本文评价

[1]	万俊池, 杜路路, 张永上, 李琳, 刘建德, 张林森. Na₄Fe_xP₄O₁₂₊_x/C钠离子电池正极材料的结构演变及其电化学性能[J]. 无机材料学报, 2025, 40(5): 497-503.
[2]	薛柯, 蔡长焜, 谢满意, 李舒婷, 安胜利. 固体氧化物燃料电池Pr₁₊_xBa_1-_xFe₂O₅₊_δ阴极材料的制备及电化学性能研究[J]. 无机材料学报, 2025, 40(4): 363-371.
[3]	张继国, 吴田, 赵旭, 杨钒, 夏天, 孙士恩. 钠离子电池正极材料循环稳定性提升策略及产业化进程[J]. 无机材料学报, 2025, 40(4): 348-362.
[4]	杨舒琪, 杨存国, 牛慧祝, 石唯一, 舒珂维. GeP₃/科琴黑复合材料作为钠离子电池高性能负极材料[J]. 无机材料学报, 2025, 40(3): 329-336.
[5]	朱志杰, 申明远, 吴涛, 李文翠. Cu和Mg协同取代抑制钠离子电池正极材料P2-Na_2/3Ni_1/3Mn_2/3O₂的P2-O2相变[J]. 无机材料学报, 2025, 40(2): 184-195.
[6]	王琨鹏, 刘兆林, 林存生, 王治宇. 基于低含水量普鲁士蓝正极的准固态钠离子电池[J]. 无机材料学报, 2024, 39(9): 1005-1012.
[7]	陈正鹏, 金芳军, 李明飞, 董江波, 许仁辞, 徐韩昭, 熊凯, 饶睦敏, 陈创庭, 李晓伟, 凌意瀚. 双钙钛矿Sr₂CoFeO₅₊_δ阴极材料的制备及其中温固体氧化物燃料电池性能研究[J]. 无机材料学报, 2024, 39(3): 337-344.
[8]	孔剑锋, 黄杰成, 刘兆林, 林存生, 王治宇. 基于DPEPA聚合物凝胶电解质的准固态钠离子电池[J]. 无机材料学报, 2024, 39(12): 1331-1338.
[9]	周靖渝, 李兴宇, 赵晓琳, 王有伟, 宋二红, 刘建军. Ti和Cu掺杂β-NaMnO₂正极材料：钠离子电池的倍率和循环性能[J]. 无机材料学报, 2024, 39(12): 1404-1412.
[10]	胡梦菲, 黄丽萍, 李贺, 张国军, 吴厚政. 锂/钠离子电池硬碳负极材料的研究进展[J]. 无机材料学报, 2024, 39(1): 32-44.
[11]	孔国强, 冷明哲, 周战荣, 夏池, 沈晓芳. Sb掺杂O3型Na_0.9Ni_0.5Mn_0.3Ti_0.2O₂钠离子电池正极材料[J]. 无机材料学报, 2023, 38(6): 656-662.
[12]	杨卓, 卢勇, 赵庆, 陈军. X射线衍射Rietveld精修及其在锂离子电池正极材料中的应用[J]. 无机材料学报, 2023, 38(6): 589-605.
[13]	李涛, 曹鹏飞, 胡力涛, 夏勇, 陈一, 刘跃军, 孙翱魁. NH₄⁺扩层MoS₂的制备及其储锌性能研究[J]. 无机材料学报, 2023, 38(1): 79-86.
[14]	王洋, 范广新, 刘培, 尹金佩, 刘宝忠, 朱林剑, 罗成果. 钾离子掺杂提高锂离子电池正极锰酸锂性能的微观机制[J]. 无机材料学报, 2022, 37(9): 1023-1029.
[15]	李文博, 黄民松, 李月明, 李驰麟. 双盐镁电池CoS₂正极材料的电化学性能研究[J]. 无机材料学报, 2022, 37(2): 173-181.