Applications of Spray Pyrolysis Technique in Material Science

Abstract

Abstract: The spray pyrolysis technique is a wonderful method in material science. It possesses many advantages, such as low processing temperature, high homogeneity and purity of products, and so on. The key challenges of spray pyrolysis are control over the morphology and composition of product particles. It has been widely applied in the past few years. In this paper, the spray pyrolysis technique and the applications in production of ceramic powders, films, and fibers were briefly reviewed.

Key words: spray pyrolysis technique, material science, application

CLC Number:

TQ174

XU Zhi-Jun,CHU Rui-Qing,LI Guo-Rong,YIN Qing-Rui. Applications of Spray Pyrolysis Technique in Material Science[J]. Journal of Inorganic Materials.

References

[1] Gary L Messing, Shi-Chang Zhang, Gopal V Jayanthi. J. Am. Ceram. Soc., 1993, 76: 2707--2726.
[2] Pramod S. Patil, Mater. Chem. Phys., 1999, 59: 185--198.
[3] Huang C S, Tao m C S, Lee C H. J. Electrochem. Soc., 1997, 144: 3556--3561.
[4] Arya S P S, Hinterman H E. Thin Solid Films, 1990, 193-194: 841--846.
[5] Yoshida M M, Andrade E. Thin Solid Films, 1993, 224: 87--96.
[6] Siefert W. Thin Solid Films, 1984, 121: 267--274.
[7] Msears W, Gee M A. Thin Solid Films, 1988, 165: 265--277.
[8] Blandenet G, Court M, Lagarde Y. Thin Solid Films, 1981, 77: 81--90.
[9] Chen C H, Buysman A A j, Kelder E M, et al. Solid State Ionic, 1995, 80: 1.
[10] Vkilledar V, Uplane M D, Lokhande C D, et al. Ind. J. Pure and Appl. Phys., 1995, 33: 773.
[11] Liu M, Zhou M L, Zhai L H, et al. Physica C 2003, 386: 366--369.
[12] Gardner T J, Messing G L. Am. Ceram. Soc. Bull, 1984, 64: 1498--1501.
[13] Nesic S, Vodnik J. Chem. Eng. Sci., 1991, 46: 527--537.
[14] Friedlander S K, Smoke, Dust, Haze. Fundamentals of Aerosol Behavior. Wiley, New York: 1977.
[15] Messing G L, Zhang S C. Ceramic Nanoparticle Synthesis by Spray Pyrolysis, in Euro-Ceramics-Ⅱ, G.Ziegler, H.Hausner. Deutsche Keramische Gesellschaft,
Cologne, Germany, 1993. 185--190.
[16] Hilarius V, Hohenberger G. Chemical Powder Procssing of ZnO Varistor Material, 94th Annual Meeting of the American Ceramic Society, Minneapolis, MN, April, 1992.
[17] Martin C B, Kurosky R P, Maupin B, et al. Spray Pyrolysis of Multicomponent Ceramic Powders. In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed.
Ceramic Powder Science III. Westerville, OH: American Ceramic Society, 1990. 12. 99--106.
[18] Barringer E A, Bower H K. J. Am. Ceram. Soc., 1982, 65: C-199--C-201.
[19] Tian Y, Dewan H, Brodwin M, et al. Microwave Sintering of Alumina Ceramics. In: Ceramic Transactions. Handwerker C, Blendell J, Kaysser W, ed. Sintering of Advaced
Ceramics. Westerville, OH: American Ceramic Society. 1990. 7. 391--401.
[20] Slamovich E B, Lange F F. Spherical Zirconia Particles via Electrostatic Atomization: Fabrication and Sintering Characteristies. In: Materials Research Society
Symposium Proceedings. Pittsburgh, PA: Materials Research Society. 1988. 12. 257--262.
[21] Roy D M, Neurgaonkar R R, O’Holleran T P, et al. Am. Ceram. Soc. Bull, 1997, 56: 1023--1024.
[22] Kodas T T, Engler E M, Lee V, et al. Appl. Phys. Lett, 1988, 52: 1622--1624.
[23] Odier P, Dubois B, Clinard C, et al. Processing of Ceramic Powder by the Spray Pyrolysis Method: Influence of the Precursors. Examples of Zirconia and Yba$_2$Cu$_3$O$_7$,
In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed. Ceramic Powder Science III. Westerville, OH: American Ceramic Society. 1990. 12. 75--89.
[24] Dubois B, Ruffier D, Odier P. Homogeneous and Fine YO-Stabilizer ZrO Powders Prepared by a Spray Pyrolysis Method. In: Ceramic Powder Processing Science.
Hausner H, Messing G L, Hirano S. Koln, Germany: Deutsche Keramische Gesellschagt. 1988. 229--236.
[25] Dubois B, Ruffier D, Odier P. J. Am. Ceram. Soc., 1989, 72 (4): 713--715.
[26] Sakurai O, Miyauchi M, Mizutani N, et al. J. Ceram. Soc. Jpn, 1989, 97: 398--403.
[27] Ciminelli R R, Messing G L. Ceramica (SaoPaulo), 1984, 30 (174): 131--138.
[28] Zhang S C, Messing J L, Borden M. J. Am. Ceram. Soc, 1990, 73: 61--67.
[29] Kato A, Nitta K, Hirata Y. J. Chem. Soc. Jpn., 1983, 10: 1544--1546.
[30] Pebler A R. J. Mater. Res, 1990, 5: 680--682.
[31] Jayanthi G V, Zhang S C, Messing G L. J. Aerosol Sci. Technol, 1993, 19 (4): 478--490.
[32] Lang R. J. Acoust. Soc. Am, 1959, 31: 68--74.
[33] Sproson D W, Messing G L, Gardner Y J. Ceram. Int, 1986, 12: 3--7.
[34] Zhang S C, Messing G L, Huebner W. J. Aerosol. Sci, 1991, 22: 585--597.
[35] Suyama Y, Kato A. Ceram, Int. 1982, 8: 17--21.
[36] IversTiffee E, Seitz K. Am. Ceram, Soc. Bull, 1987, 66 (9): 1384--1388.
[37] 傅希贤, 单志兴, 曾淑兰. 应用科学学报, 1997, 15 (2): 249--252.
[38] Lang R J. J. Acoust. Soc. Am., 1962, 34: 6--8.
[39] Rajan R, Pandit A B. Ultrasonics, 2001, 39: 235--255.
[40] Ishizawa H, Sakurai O, Izutani N M, et al. Am. Ceram. Soc. Bull, 1986, 65: 1399--1404.
[41] Ishizawa H, Sakurai O, Izutani N M, et al. Yogyo Kyokaishi, 1985, 93 (7): 382.
[42] Tohge N, Tatsumisago M, Minami T, et al. Jpn. J. Appl. Phys, 1988, 27 (6): L1086--L1088.
[43] Zhao Xinyu, Zheng Baicun, Li Chunzhong, et al. Powder Technology, 1998, 100: 20--23.
[44] Mizutani N, Liu T Q. Synthesis of Spherical Si$_3$N$_4$ Powder by Spray Pyrolysis of Polysilazane. In: Ceramic Transactions. Messing G L, Hirano S, Hausner H, ed. Ceramic
Powder Science III. Westerville, OH: American Ceramic Society. 1990. 12. 59--73.
[45] Lindquist D A, Kodas T T, Smith D M, et al. J. Am. Ceram. Soc, 1991, 74: 3126--3128.
[46] Chen Zhenhua, Chen Gang, Yan Hongge, et al. Mater. Res. Bull, 2003, 38: 1487--1492.
[47] Niihara K. J. Jpn. Ceram. Soc, 1991, 99: 974.
[48] Carim A H, Douherty P, Kodas T T, et al. Mater. Lett, 1989, 8: 335--339.
[49] Choa Y H, Yang J K, Kim B H, et al. J. Magn. Mater, 2003, 266: 12--19.
[50] Kanno Y, Suzuki T. J. Mater. Sci, 1988, 23: 3067--3072.
[51] Sproson D W. “Precursor and Additive Effects on the Characteristics of Powder Synthesized by Evaporative Decomposition of Solutions”, Thesis M S. Pennsylvania
State University, University Park, PA. 1986.
[52] 周晓东, ZHANG S C, 古宏晨(ZHOU Xiao-Dong, et al). 无机材料学报 (Journal of Inorganic Materials), 1998, 13 (3): 401--406.
[53] Blancher G, Fincher C R. Jr, Supercond. Sci. Technol, 1991, 4: 69--72.
[54] Jergel M, Chromik S, Strbik V, et al. Supercond. Sci. Technol, 1992, 5: 225--230.
[55] Vermat K K, Sexena A K, Singh,m K, et al. Supercond. Sci. Technol, 1992, 5:
163--167.
[56] Afify H H, Nasser S A, Demian S E. J. Mater. Sci, 1991, 2: 152--156.
[57] Falcony C, Garcia M, Ortiz A, et al. J. Appl. Phys, 1992, 72: 1525--1527.
[58] Weng S, Cocivera M. J. Electrochem. Soc, 1992, 139: 3220--3224.
[59] Kumari S, Singh A K, Srivastava O N. Supercond. Sci. Technol, 1996, 9: 405.
[60] Pawar S H, Pawaskar P N. Mater. Res. Bull, 1995, 30: 277--280.
[61] Moriwaki Y, Sugano T, Gasser C, et al. Appl. Phys. Lett, 1996, 69: 3423--3425.
[62] Kobayashi M, Okding T R, Sayer M, et al. Ultrasonics, 2002, 39: 675--680.