高级检索
无机材料学报

无机材料学报

• 研究论文 •    下一篇

定向凝固共晶多相复合陶瓷的研究现状

潘振甦; 张惠丰; 郭景坤   

  1. 中国科学院上海硅酸盐研究所, 上海 200050
  • 收稿日期:1998-12-08 修回日期:1999-01-26 出版日期:1999-08-20 网络出版日期:1999-08-20

Status on the Unidirectionally Solidified Eutectic Composite

PAN Zhen-Su, ZHANG Hui-Feng, GUO Jing-Kun   

  1. Shanghai Institute of Ceramics; Chinese Academy of Sciences Shanghai 200050 China
  • Received:1998-12-08 Revised:1999-01-26 Published:1999-08-20 Online:1999-08-20

PDF (PC)

850

被引次数

50

摘要： 本文评述了定向凝固共晶多相复合陶瓷的制备方法， 并介绍了定向凝固 Ａｌ２ Ｏ３/ Ｙ Ａ Ｇ 共晶复合材料优异的高温强度、热稳定性以及抗蠕变性断裂强度达３５０ ～４００ Ｍ Ｐａ ， 且从室温到２０７３ Ｋ 基本不变； 在１９２３ Ｋ 以上拉伸试验， 显示出由位错运动引发的塑性形变； 且观察到类似于金属的屈服现象这种复合材料经１９７３ Ｋ/１０００ｈ 空气中热处理后的显微结构也十分稳定有望成为２１ 世纪新的耐热结构材料

关键词: 定向凝固, 共晶, 氧化铝, 钇铝石榴石, 复合材料

Abstract: This paper reviews the manufacturing method of the unidirectionally solidified eutectic composite. A unidirectionally solidified Al_2O_3/YAG
eutectic composite has superior flexural strength, thermal stability and creep resistance at high-temperature up to 2073K. For example, the flexural strength
is 350--400MPa indepedent of testing temperature from room temperature to 2073K (just below its melting point of 2100K). During tensile test above 1923K, the
eutectic composite shows the evidence of plastic deformation occurring by dislocation motion, and a yield phenomenon similar to many metals observed.
The microstructure of the composite is extremely stable after heat treatment at 1973K for 1000h in air atmosphere. It may be expected that it would be a
new heat-resistant structural material in the twenty-one century.

Key words: unidirectional solidification, eutectic, alumina, garnet, composite

中图分类号: