反应烧结碳化硅的研究与进展

无机材料学报

反应烧结碳化硅的研究与进展

王艳香^1,2; 谭寿洪¹; 江东亮¹

1. 中国科学院上海硅酸盐研究所上海 200050; 2. 景德镇陶瓷学院; 景德镇 333001

收稿日期:2003-05-26 修回日期:2003-07-18 出版日期:2004-05-20 网络出版日期:2004-05-20

Research and Development of Reaction Sintered Silicon Carbide

WANG Yan-Xiang^1,2; TAN Shou-Hong¹; JIANG Dong-Liang¹

1. Shanghai Institute of Ceramics; Chinese Academy of Sciences; Shanghai 200050; China; 2. Jingdezhen; Ceramic Institute; Jingdezhen 333001; China

Received:2003-05-26 Revised:2003-07-18 Published:2004-05-20 Online:2004-05-20

摘要/Abstract

摘要： 反应烧结碳化硅以其适中的机械性能、抗氧化性能和相对较低的造价而日益受到重视.本文对反应烧结碳化硅的类型、当前研究热点及反应烧结机理进行了综合评述.

关键词: 反应烧结, 碳化硅, 研究与制备, 反应机理

Abstract: Reaction sintered silicon carbides are getting more and more attention because of their proper mechanical strength, oxidation resistance and low cost. In this paper, the type, the focus of current research about reaction sintered silicon carbide and the reaction mechanism of carbon with molten silicon were reported.

Key words: reaction sintered, silicon carbide, research and preparation, reaction mechanism

中图分类号:

TQ174

王艳香,谭寿洪,江东亮. 反应烧结碳化硅的研究与进展[J]. 无机材料学报.

WANG Yan-Xiang,TAN Shou-Hong,JIANG Dong-Liang. Research and Development of Reaction Sintered Silicon Carbide[J]. Journal of Inorganic Materials.

参考文献

[1] Tomlinson W J, Khela S. Journal of Materials Science, 1992, 27: 3372--3378.
[2] Harrison S D, Corelli J C. Journal of Nuclear Materials, 1981, 99: 203--212.
[3] Scholl R, Bohm A, Kieback B. Materials Science and Engineering A, 1999, 261: 204--211.
[4] Popper P. Special Ceramics. London: Heywood, 1960. 209--213.
[5] Sawyer G R, Page T F. Journal of Materials Science, 1978, 13: 885--904.
[6] Kim H W, Kim H E. Journal of American Ceramic Society, 1999, 82 (6): 1601--1604.
[7] Scafè E, Giunta G, Fabbri L, et al. Journal of the European Ceramic Society, 1996, 16: 703--713.
[8] Hucke E E. Methods of producing carbonaceous bodies and the products thereof. US, 1975, (7): 3; 859; 421.
[9] 武七德, 裴新美, 王怀德. 武汉工业大学学报, 1997, 19 (4): 5--8.
[10] 裴新美, 武七德, 赵~~前. 武汉工业大学学报, 1997, 19 (4): 71--74.
[11] Lim C B, Yano T, Isekl T. Journal of Materials Science, 1989, 24: 4144--4151.
[12] Chakrabarti O P, Das P K, Mondal S. Bulletin Materials Science, 2001, 24 (2): 181--184.
[13] Chawla K K, Petrovic J J, Jose A J, et al. Materials Science and Engineering A, 1999, 261: 181--187.
[14] Singh M, Behrendt R. Journal of Materials Science, 1994, 9 (7): 1701--1708.
[15] Simner S P, Xiao P, Cerby B. Journal of Materials Science, 1998, 33 (23): 5557--5568.
[16] Xi X M, Xial L M, Yang X F. Journal of Materials Science, 1995, 10 (10): 2415--2417.
[17] Xi X M, Xiao L M, yang X F. Journal of Materials Science, 1996, 11 (4): 1037--1043.
[18] Hozer L, Lee J R, Chiang Y M. Materiasl Science and Engineering A, 1995, 195: 131--143.
[19] Hozer L, Chiang Y M. Journal of Materials Research, 1996, 11 (9): 2346--2357.
[20] Sayano A, Sutoh C, Suyama S, et al. Journal of Nuclear Materials, 1999, 271: 467--471.
[21] Mehan R L. Journal of Materials Science, 1978, 13: 328--366.
[22] Fischedick J S, Zern A, Mayer J, et al. Materials Science and Engineering A, 2002, 332: 146--152.
[23] Shuaib M, Davies T J. Wear, 2001, 249: 20--30.
[24] Feria-varela F M, Martínez-Fernández J, Arellano-Lopez A R, et al. Journal of the European Ceramic Society, 2002, 22: 2719--2725.
[25] Munoz A, Martínez Fernández, Singh M. Journal of the European Ceramic Society, 2002, 22: 2727--2733.
[26] 蔡宁, 马荣, 乔冠军(CAI Ning, et al). 无机材料学报(Journal of Inorganic Materials), 2001, 16 (4): 763--776.
[27] Prasert S S, Joaquín A, Orejas, et al. Industials & Engineering Research, 2001, 40: 5191--5198.
[28] Ilegbusi O J, Yang J J, Mahmut D, et al. Composites Part A, 1999, 30: 339--348.
[29] Behrendt D R, Singh M. Journal of Materials Synthesis and Processing, 1994, 2 (2): 117--123.
[30] Pampuch R, Walasek E, Bia?oskórski J. Ceramics International, 1986, 12: 99--106.
[31] Pampuch R, Bia?oskórski J, Walasek E. Ceramics International, 1987, 12: 63--68.
[32] Ness J N, Page T F. Journal of Materials Science, 1986, 21: 1377--1397.