高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

溶胶-凝胶法中热处理对PMNT薄膜结构的影响

邸利锋; 丁爱丽; 何夕云; 罗维根   

  1. 中国科学院上海硅酸盐研究所无机功能材料开放实验室 上海 200050
  • 收稿日期:2001-03-16 修回日期:2001-04-16 出版日期:2002-03-20 网络出版日期:2002-03-20

Influences of Heat Treatment on the Structure of PMNT Thin Films Derived by Sol-Gel Process

DI Li-Feng; DING Ai-Li. HE Xi-Yun; LUO Wei-Gen   

  1. Laboratory of Functional Inorganic Materials; Shanghai Institute of Ceramics; Chinese Academy of Sciences. Shanghai 200050; China
  • Received:2001-03-16 Revised:2001-04-16 Published:2002-03-20 Online:2002-03-20

PDF (PC)

882

被引次数

3

摘要： 研究用溶胶－凝胶方法制备ＰＭＮＴ（铌镁酸铅）薄膜的工艺过程．通过ＸＲＤ和ＳＰＭ系统地分析了热处理条件（热解温度和退火条件）与ＰＭＮＴ薄膜的形态．结晶和取向的对应关系，已建立起制备高度取向 ＰＭＮＴ薄膜的工艺．并成功地在Ｐｔ／Ｔｉ／ＳＩＯ２／Ｓｉ衬底上制备成（１１１）取向的ＰＭＮＴ薄膜．

关键词: 弛豫铁电体, 溶胶-凝胶, 热解, 退火

Abstract: PMNT (Lead Magnesium Niobate Titanate) thin films with preferred orientation were deposited on Pt/TiO2/SiO2/Si substrate by a sol-gel process. The influence of the technological process on morphology, crystallization and orientation of films were investigated by XRD(X Ray Diffraction) and SPM(Scan Probe Microscope). The optimum process for preparing PMNT thin film with high orientation was established.

Key words: relax ferroelectrics, sol-gel, pyrolysis, annealing

中图分类号: