Journal of Inorganic Materials

Previous Articles     Next Articles

Anomalous Fluorescence Thermal Quenching in a Red-emitting RbZnF3:Eu3+ Phosphor under Violet Excitation

DONG Langping1, LI Shixuan1, YANG Shaoxing1, HOU Jingshan1, LIN Yandan4, ZHOU Pengcheng5, SUN Xuejiao3, SUN Yiyang3, CHEN Daqin2, FANG Yongzheng1   

  1. 1. Faculty of Materials Technology, Shanghai Institute of Technology, Shanghai 201418, China;
    2. College of Physics and Energy, Fujian Normal University, Fuzhou 350117, China;
    3. State Key Laboratory of High Performance Ceramics, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201899, China;
    4. College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai 200438, China;
    5. Shanghai Aviation Electric Co., Ltd, Shanghai 201101, China
  • Received:2025-11-01 Revised:2025-12-06
  • Contact: SUN Yiyang, professor. E-mail: yysun@mail.sic.ac.cn; FANG Yongzheng, professor. E-mail: fyz1003@sina.com
  • About author:DONG Langping (1993-), associate professor. E-mail: lpdong@sit.edu.cn
  • Supported by:
    National Key Research and Development Program of China (2021YFB3500501, 2021YFB3500502, 2021YFB3500503, 2021YFB3500500); National Natural Science Foundation of China (NSFC) (52302188); Shanghai Sailing Program (23YF1446100); Shanghai Rising-Star Program (21QC1401100); Talent Introduction Program of Shanghai Institute of Technology (YJ2022-1)

Abstract: Thermal quenching is a key challenge in the application of fluorescent materials in solid state lighting devices. Herein, we report a perovskite phosphor RbZnF3:Eu3+ exhibiting anti-thermal quenching behavior. Under violet excitation, this phosphor yields bright red emission. As the temperature rises, the luminescence intensity first increases up to 175 ℃ (i.e., anti-thermal quenching) and then decreases. When the temperature is above 200 ℃, the luminescence intensity falls below the value at room temperature. We carry out comprehensive characterizations and propose that the observed anti-thermal quenching behavior is mainly due to the existence of defect levels. First-principles calculations show that Rb vacancy and F vacancy could be responsible for the observed defect levels. We also fabricate a white LED using the RbZnF3:Eu3+ phosphor to verify its potential application.

Key words: phosphors, thermal quenching, perovskite, LED, defect engineering

CLC Number: