Research Progress of Cs2AgBiBr6 Perovskite Solar Cell

doi:10.15541/jim20230049

Abstract

Abstract:

In recent years, organic-inorganic hybrid perovskite solar cells have received a lot of attention for their excellent performance and low manufacturing cost. However, the toxicity of lead in organic-inorganic hybrid perovskite solar cells and instability inhibits its further commercialization. Double perovskite Cs₂AgBiBr₆ possess excellent stability, low toxicity, long carrier lifetime, and small effective carrier mass, and is considered as a promising photovoltaic material. It has been applied in solar cells and displayed superior performance. However, the power conversion efficiency of Cs₂AgBiBr₆ perovskite solar cell still lags behind organic-inorganic hybrid perovskite solar cells, and its development faces various challenges. This review firstly introduces the crystal structure and the structural parameters such as tolerance factor of Cs₂AgBiBr₆. And then, the progress of thin film preparation technologies such as solution processing method, anti-solvent assisted film forming method, vapor deposition processing method, vacuum-assisted film forming method, spray-coating method are summarized, and the advantages and disadvantages of various preparation technologies are discussed. The performance optimization strategies of Cs₂AgBiBr₆ perovskite solar cells are analyzed from three aspects: element doping, additive engineering, and interface engineering (interface energy level matching and interface defect passivation), and the research progress in recent years is reviewed. Finally, the challenges faced by Cs₂AgBiBr₆ perovskite solar cells are pointed out, and future research directions are prospected from three aspects: precursor solvent engineering, bandgap engineering, and device degradation mechanism.

Key words: Cs₂AgBiBr₆, solar cell, power conversion efficiency, double perovskites, review

CLC Number:

TM914

ZHANG Lun, LYU Mei, ZHU Jun. Research Progress of Cs₂AgBiBr₆ Perovskite Solar Cell[J]. Journal of Inorganic Materials, 2023, 38(9): 1044-1054.

Figures/Tables 8

Fig. 1 (a) Crystal structure diagrams of perovskite ABX3 and (b) double perovskite A2B+B3+X6[30]

Fig. 2 Value range of τ in Eq. (3)[32]

Fig. 3 Fabrication processes of Cs2AgBiBr6 films (a) Solution processing method[19]; (b) Anti-solvent assisted film forming method[8]; (c) Vapor deposition processing method[35]; (d) Vacuum-assisted film forming method[37]; (e) Spray-coating method[38]

Fig. 4 SEM images of Cs2AgBiBr6 films deposited using (a) DMSO and (b) DMSO+DMF as precursor solvents[34] and prepared by (c) vapor deposition and (d) solution processing[36]

Fig. 5 Ion doped Cs2AgBiBr6 perovskite solar cells (a) SEM images of Cs2AgBiBr6, Cs1.99Li0.01AgBiBr6(Cs), Cs1.99Na0.01AgBiBr6(Cs-Li), Cs1.99K0.01AgBiBr6(Cs-Na), and Cs1.99Rb0.01AgBiBr6(Cs-K) films; (b) J-V curves of Cs2AgBiBr6 perovskite solar cells (w/o: Cs2AgBiBr6, w Li+: Cs1.99Li0.01AgBiBr6, w Na+: Cs1.99Na0.01AgBiBr6, w K+: Cs1.99K0.01AgBiBr6, w Rb+: Cs1.99Rb0.01AgBiBr6)[54]; (c) Band structure diagram for Cs2AgBiBr6[57]; (d) Tauc plots of Cs2AgSbxBi1-xBr6 (x=0, 0.25, 0.50, 0.75) films[58]; (e) Crystal structure diagram of Cs2AgBiBr6-2xSx; (f) UV-Vis absorption spectra with inset showing corresponding Tauc plots (right) of Cs2AgBiBr6-2xSx film[60]. Colorful figures are available on website

Fig. 6 Additive engineering optimization of Cs2AgBiBr6 films (a) Schematic illustration of MABr additive assisted Cs2AgBiBr6 crystallization process; (b) SEM images of Cs2AgBiBr6 films prepared (left) without and (right) with MABr[66]; (c) Schematic diagram of the mechanism of additive GuaSCN in the formation process of Cs2AgBiBr6 film; (d) SEM images of Cs2AgBiBr6 films prepared (left) without and (right) with GuaSCN [67]; (e) Schematic illustration of BMPyr+-Br- interaction between ionic liquid BMPyrCl and Cs2AgBiBr6 perovskite; (f) SEM images of Cs2AgBiBr6 films prepared (left) without and (right) with BMPyrCl[70]. Colorful figures are available on website

Fig. 7 Schematic diagrams of the interface energy level alignments in Cs2AgBiBr6 solar cells (a) Cu2O[71] and (b) HTL-1, HTL-2 or HTL-3[72] as hole transport layers; (c) C60/TiO2 as electron transport layers[73]

Fig. 8 Schematic diagrams of interface defect passivation in Cs2AgBiBr6 solar cells (a) PMMA[74], (b) Y-6[75] and (c) N719[76] passivating Cs2AgBiBr6/HTL interfaces; (d) MXene passivating Cs2AgBiBr6/ETL interface[77]. Colorful figures are available on website

References 78

[1]	KOMIJA A, TESHIMA K, SHIRAI Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 2009, 131(17): 6050. DOI PMID
[2]	NREL. Best research-cell efficiency chart. [2023-04-05]. https://www.nrel.gov/pv/cell-efficiency.html.
[3]	ZHAO J, WEI L, JIA C, et al. Metallic tin substitution of organic lead perovskite films for efficient solar cells. Journal of Materials Chemistry A, 2018, 6(41): 20224. DOI URL
[4]	LIU D, YIN Y X, LIU F J, et al. Thickness-dependent highly sensitive photodetection behavior of lead-free all-inorganic CsSnBr₃ nanoplates. Rare Metals, 2022, 41(5): 1753. DOI
[5]	HU W, HE X, FANG Z, et al. Bulk heterojunction gifts bismuth- based lead-free perovskite solar cells with record efficiency. Nano Energy, 2020, 68: 104362. DOI URL
[6]	JIA Q, LI C, TIAN W, et al. Large-grained all-inorganic bismuth- based perovskites with narrow band gap via Lewis acid-base adduct approach. ACS Applied Materials & Interfaces, 2020, 12(39): 43876.
[7]	MA Z, SHI Z, YANG D, et al. Electrically-driven violet light-emitting devices based on highly stable lead-free perovskite Cs₃Sb₂Br₉ quantum dots. ACS Energy Letters, 2020, 5(2): 385. DOI URL
[8]	GAO W, RAN W, XI J, et al. High-quality Cs₂AgBiBr₆ double perovskite film for lead-free inverted planar heterojunction solar cells with 2.2% efficiency. ChemPhysChem, 2018, 19(14): 1696. DOI URL
[9]	顾津宇, 齐朋伟, 彭扬, 等. 无机非铅钙钛矿太阳能电池研究进展. 物理化学学报, 2017, 33(7): 1379.
[10]	JIANG X, LI H, ZHOU Q, et al. One-step synthesis of SnI₂·(DMSO)_x adducts for high-performance tin perovskite solar cells. Journal of the American Chemical Society, 2021, 143(29): 10970. DOI URL
[11]	ZHOU J, HAO M, ZHANG Y, et al. Chemo-thermal surface dedoping for high-performance tin perovskite solar cells. Matter, 2022, 5(2): 683. DOI URL
[12]	YU B B, CHEN Z, ZHU Y, et al. Heterogeneous 2D/3D tin-halides perovskite solar cells with certified conversion efficiency breaking 14%. Advanced Materials, 2021, 33(36): 2102055. DOI URL
[13]	SLAVNEY A H, HU T, LINDENBERG A M, et al. A bismuth- halide double perovskite with long carrier recombination lifetime for photovoltaic applications. Journal of the American Chemical Society, 2016, 138(7): 2138. DOI URL
[14]	PAN W, WU H, LUO J, et al. Cs₂AgBiBr₆ single-crystal X-ray detectors with a low detection limit. Nature Photonics, 2017, 11(11): 726. DOI URL
[15]	FENG H J, DENG W, YANG K, et al. Double perovskite Cs₂BBiX₆ (B=Ag, Cu; X=Br, Cl)/TiO₂ heterojunction: an efficient Pb-free perovskite interface for charge extraction. The Journal of Physical Chemistry C, 2017, 121(8): 4471. DOI URL
[16]	LI Y J, WU T, SUN L, et al. Lead-free and stable antimony- silver-halide double perovskite (CH₃NH₃)₂AgSbI₆. RSC Advances, 2017, 7(56): 35175. DOI URL
[17]	IGBARI F, WANG Z K, LIAO L S. Progress of lead-free halide double perovskites. Advanced Energy Materials, 2019, 9(12): 1803150. DOI URL
[18]	BARTEL C J, CLARY J M, SUTTON C, et al. Inorganic halide double perovskites with optoelectronic properties modulated by sublattice mixing. Journal of the American Chemical Society, 2020, 142(11): 5135. DOI PMID
[19]	NING W, GAO F. Structural and functional diversity in lead-free halide perovskite materials. Advanced Materials, 2019, 31(22): 1900326. DOI URL
[20]	PECUNIA V, OCCHIPINTI L G, Chakraborty A, et al. Lead-free halide perovskite photovoltaics: challenges, open questions, and opportunities. APL Materials, 2020, 8(10): 100901. DOI URL
[21]	GREUL E, PETRUS M L, BINEK A, et al. Highly stable, phase pure Cs₂ABiBr₆ double perovskite thin films for optoelectronic applications. Journal of Materials Chemistry A, 2017, 5(37): 19972. DOI URL
[22]	ZHANG Z, SUN Q, LU Y, et al. Hydrogenated Cs₂AgBiBr₆ for significantly improved efficiency of lead-free inorganic double perovskite solar cell. Nature Communications, 2022, 13: 3397. DOI
[23]	ZHAO Y, MA F, QU Z, et al. Inactive (PbI₂)₂RbCl stabilizes perovskite films for efficient solar cells. Science, 2022, 377(6605): 531. DOI URL
[24]	JEONG S, SEO S, YANG H, et al. Cyclohexylammonium-based 2D/3D perovskite heterojunction with funnel-like energy band alignment for efficient solar cells (23.91%). Advanced Energy Materials, 2021, 11(42): 2102236. DOI URL
[25]	MIN H, KIM M, LEE S, et al. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Science, 2019, 366(6466): 749. DOI URL
[26]	XIAO K, LIN R, HAN Q, et al. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm² using surface- anchoring zwitterionic antioxidant. Nature Energy, 2020, 5(1): 870. DOI
[27]	TRESS W, SIRTL M T. Cs₂AgBiBr₆ double perovskites as lead-free alternatives for perovskite solar cells. Solar RRL, 2022, 6(2): 2100770. DOI URL
[28]	SAVORY C N, WALSH A, SCANLON D O, et al. Can Pb-free halide double perovskites support high-efficiency solar cells. ACS Energy Letters, 2016, 1(5): 949. DOI URL
[29]	YADAV S C, SRIVASTAVA A, MANJUNATH V, et al. Properties, performance and multidimensional applications of stable lead-free Cs₂AgBiBr₆ double perovskite. Materials Today Physics, 2022, 26: 100731. DOI URL
[30]	KUNG P K, LI M H, LIN P Y, et al. Lead-free double perovskites for perovskite solar cells. Solar RRL, 2020, 4(2): 1900306. DOI URL
[31]	LI C, LU X, DING W, et al. Formability of ABX₃ (X=F, Cl, Br, I) halide perovskites. Acta Crystallographica Section B: Structural Science, 2008, 64(6): 702. DOI URL
[32]	BARTEL C J, SUTTON C, GOLDSMITH B P, et al. New tolerance factor to predict the stability of perovskite oxides and halides. Science Advances, 2019, 5(2): eaav0693. DOI URL
[33]	SU J, MOU T, WEN J, et al. First-principles study on the structure, electronic, and optical properties of Cs₂AgBiBr_6-_xCl_x mixed-halide double perovskites. The Journal of Physical Chemistry C, 2020, 124(9): 5371. DOI URL
[34]	ZHAO D, WANG B, LIANG C, et al. Facile deposition of high-quality Cs₂AgBiBr₆ films for efficient double perovskite solar cells. Science China Materials, 2020, 63(8): 1518. DOI
[35]	WANG M, ZENG P, BAI S, et al. High-quality sequential- vapor-deposited Cs₂AgBiBr₆ thin films for lead-free perovskite solar cells. Solar RRL, 2018, 2(12): 1800217. DOI URL
[36]	IGBARI F, WANG R, WANG Z K, et al. Composition stoichiometry of Cs₂AgBiBr₆ films for highly efficient lead-free perovskite solar cells. Nano Letters, 2019, 19(3): 2066. DOI URL
[37]	WU C, ZHANG Q, LIU Y, et al. The dawn of lead-free perovskite solar cell: highly stable double perovskite Cs₂AgBiBr₆ film. Advanced Science, 2018, 5(3): 1700759. DOI URL
[38]	DAEM N, DEWALQUE J, LANG F, et al. Spray-coated lead-free Cs₂AgBiBr₆ double perovskite solar cells with high open-circuit voltage. Solar RRL, 2021, 5(9): 2100422. DOI URL
[39]	REN Y, DUAN B, XU Y, et al. New insight into solvent engineering technology from evolution of intermediates via one-step spin-coating approach. Science China Materials, 2017, 60(17): 392. DOI URL
[40]	TODOROV T, MITZI D B. Direct liquid coating of chalcopyrite light-asorbing layers for photovoltaic devices. European Journal of Inorganic Chemistry, 2010, 2010(1): 17. DOI URL
[41]	YANG J, BAO C, NING W, et al. Stable, high-sensitivity and fast-response photodetectors based on lead-free Cs₂AgBiBr₆ double perovskite films. Advanced Optical Materials, 2019, 7(13): 1801732.
[42]	DUAN J, YANG Y, TANG J, et al. MACl enhanced electron extraction in all-inorganic Cs₂AgBiBr₆perovskite photovoltaics. Chemical Communications, 2023, 59(9): 1173. DOI URL
[43]	PANTALER M, CHO K T, QUELOZ V I E, et al. Hysteresis-free lead-free double-perovskite solar cells by interface engineering. ACS Energy Letters, 2018, 3(8): 1781. DOI URL
[44]	NING W, WANG F, WU B, et al. Long electron-hole diffusion length in high-quality lead-free double perovskite films. Advanced Materials, 2018, 30(20): 1706246. DOI URL
[45]	THANH N T K, MACLEAN N, MAHIDDINE S. Mechanisms of nucleation and growth of nanoparticles in solution. Chemical Reviews, 2014, 114(15): 7610. DOI PMID
[46]	DUNLAP-SHOHL W A, ZHOU Y, PADTURE N P, et al. Synthetic approaches for halide perovskite thin films. Chemical Reviews, 2018, 119(5): 3193. DOI URL
[47]	JUNG M, JI S G, KIM G, et al. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chemical Society Reviews, 2019, 48(7): 2011. DOI PMID
[48]	DING B, GAO L, LIANG L, et al. Facile and scalable fabrication of highly efficient lead iodide perovskite thin-film solar cells in air using gas pump method. ACS Applied Materials & Interfaces, 2016, 8(31): 20067.
[49]	BISHOP J E, READ C D, SMITH J A, et al. Fully spray-coated triple-cation perovskite solar cells. Scientific Reports, 2020, 10(1): 6610. DOI PMID
[50]	TURREN-CRUZ S H, HAGFELDT A, SALIBA M. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture. Science, 2018, 362(6413): 449. DOI URL
[51]	UCHIDA R, BINET S, ARORA N, et al. Insights about the absence of Rb cation from the 3D perovskite lattice: effect on the structural, morphological, and photophysical properties and photovoltaic performance. Small, 2018, 14(36): 1802033. DOI URL
[52]	YI C, LUO J, MELONI S, et al. Entropic stabilization of mixed A-cation ABX₃ metal halide perovskites for high performance perovskite solar cells. Energy & Environmental Science, 2016, 9(2): 656.
[53]	ZHANG Z, WU C, WANG D, et al. Improvement of Cs₂AgBiBr₆ double perovskite solar cell by rubidium doping. Organic Electronics, 2019, 74: 204. DOI URL
[54]	LI J, DUAN J, DU J, et al. Alkali metal ion-regulated lead-free, all-inorganic double perovskites for HTM-free, carbon-based solar cells. ACS Applied Materials & Interfaces, 2020, 12(42): 47408.
[55]	MCCLURE E T, BALL M R, WINDL W, et al. Cs₂AgBiX₆ (X = Br, Cl): new visible light absorbing, lead-free halide perovskite semiconductors. Chemistry of Materials, 2016, 28(5): 1348. DOI URL
[56]	FILIP M R, HILLMAN S, HAGHIGHIRAD A A, et al. Band gaps of the lead-free halide double perovskites Cs₂BiAgCl₆and Cs₂BiAgBr₆ from theory and experiment. The Journal of Physical Chemistry Letters, 2016, 7(13): 2579. DOI URL
[57]	SEBASTIÁ-LUNA P, CALBO J, ALBIACH-SEBASTIÁN N, et al. Tuning the optical absorption of Sn-, Ge-, and Zn-substituted Cs₂AgBiBr₆ double perovskites: structural and electronic effects. Chemistry of Materials, 2021, 33(20): 8028. DOI URL
[58]	LIU Y, ZHANG L, WANG M, et al. Bandgap-tunable double-perovskite thin films by solution processing. Materials Today, 2019, 28: 25. DOI
[59]	PANTALER M, OLTHOF S, MEERHOLZ K, et al. Bismuth-antimony mixed double perovskites Cs₂AgBi_1-_xSb_xBr₆ in solar cells. MRS Advances, 2019, 4(64): 3545. DOI URL
[60]	PAI N, LU J, WANG M, et al. Enhancement of the intrinsic light harvesting capacity of Cs₂AgBiBr₆ double perovskite via modification with sulphide. Journal of Materials Chemistry A, 2020, 8(4): 2008. DOI URL
[61]	LYU M, LEEA D K, PARK N G. Effect of alkaline earth metal chloride additives BCl₂ (B = Mg, Ca, Sr and Ba) on photovoltaic performance of FAPbI₃ based perovskite solar cells. Nanoscale Horiz, 2020, 5(9): 1332. DOI URL
[62]	LYU M, PARK N G. Effect of additives AX (A=FA, MA, Cs, Rb, NH₄, X=Cl, Br, I) in FAPbI₃ on photovoltaic parameters of perovskite solar cells. Solar RRL, 2020, 4(10): 2000331. DOI URL
[63]	FENG J, ZHU X, YANG Z, et al. Record efficiency stable flexible perovskite solar cell using effective additive assistant strategy. Advanced Materials, 2018, 30(35): 1801418. DOI URL
[64]	LI T, PAN Y, WANG Z, et al. Additive engineering for highly efficient organic-inorganic halide perovskite solar cells: recent advances and perspectives. Journal of Materials Chemistry A, 2017, 5(25): 12602. DOI URL
[65]	MOORE D T, SAI H, TAN K W, et al. Crystallization kinetics of organic-inorganic trihalide perovskites and the role of the lead anion in crystal growth. Journal of the American Chemical Society, 2015, 137(6): 2350. DOI PMID
[66]	WU H, WANG Y, LIU A, et al. Methylammonium bromide assisted crystallization for enhanced lead-free double perovskite photovoltaic performance. Advanced Functional Materials, 2022, 32(14): 2109402. DOI URL
[67]	YANG X, XIE A, XIANG H, et al. First investigation of additive engineering for highly efficient Cs₂AgBiBr₆-based lead-free inorganic perovskite solar cells. Applied Physics Reviews, 2021, 8: 041402. DOI URL
[68]	YANG A, ZHANG L, XU Y, et al. V_OC over 1.2 V for Cs₂AgBiBr₆ solar cells based on formamidinium acetate additive. Journal of Materials Science: Materials in Electronics, 2022, 33: 18758. DOI
[69]	ZHANG L, XU Y, NIU P J, et al. Regulating the film crystallization kinetics with thiourea additive in Cs₂AgBiBr₆ solar cells. Journal of Physics D: Applied Physics, 2023, 56(7): 075501. DOI
[70]	LI J, MENG X, WU Z, et al. Pinning bromide ion with ionic liquid in lead-free Cs₂AgBiBr₆ double perovskite solar cells. Advanced Functional Materials, 2022, 32(25): 2112991. DOI URL
[71]	XIAO B, TAN Y, YI Z, et al. Band matching strategy for all-inorganic Cs₂AgBiBr₆ double perovskite solar cells with high photovoltage. ACS Applied Materials & Interfaces, 2021, 13(31): 37027.
[72]	ZHANG Z, WU C, WANG D, et al. Efficient nonlead double perovskite solar cell with multiple hole transport layers. ACS Applied Energy Materials, 2020, 3(10): 9594. DOI URL
[73]	LUO T, ZHANG Y, CHANG X, et al. Dual interfacial engineering for efficient Cs₂AgBiBr₆ based solar cells. Journal of Energy Chemistry, 2021, 53: 373.
[74]	LI J, YAN F, YANG P, et al. Suppressing interfacial shunt loss via functional polymer for performance improvement of lead-free Cs₂AgBiBr₆ double perovskite solar cells. Solar RRL, 2021, 6(4): 2100791. DOI URL
[75]	LI B, WU X, ZHANG S, et al. Efficient and stable Cs₂AgBiBr₆ double perovskite solar cells through in-situ surface modulation. Chemical Engineering Journal, 2022, 446: 137144. DOI URL
[76]	YANG X, CHEN Y, LIU P, et al. Simultaneous power conversion efficiency and stability enhancement of Cs₂AgBiBr₆ lead-free inorganic perovskite solar cell through adopting a multifunctional dye interlayer. Advanced Functional Materials, 2020, 30(23): 2001557. DOI URL
[77]	LI Z, WANG P, MA C, et al. Single-layered MXene nanosheets doping TiO₂ for efficient and stable double perovskite solar cells. Journal of the American Chemical Society, 2021, 143(6): 2593. DOI URL
[78]	WANG B, LI N, YANG L, et al. Chlorophyll derivative-sensitized TiO₂ electron transport layer for record efficiency of Cs₂AgBiBr₆ double perovskite solar cells. Journal of the American Chemical Society, 2021, 143(5): 2207. DOI URL

Research Progress of Cs₂AgBiBr₆ Perovskite Solar Cell

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 8

References 78

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	CHEN Mingjun, MIAO Hongkang, XIAO Yingjun, DENG Jianbo, ZHANG Xiang, ZHAO Jiupeng, LI Yao. Photo- and Thermo-chromic Dual-responsive Materials: A Review on Design Strategies and Applications in Smart Windows [J]. Journal of Inorganic Materials, 2026, 41(6): 723-738.
[2]	SONG Kunjie, XIE Rongjun. Research Advances on Machine Learning-driven Development of Novel Luminescent Materials [J]. Journal of Inorganic Materials, 2026, 41(6): 689-703.
[3]	HU Yuqing, ZHU Yixin, LE Xianhao, WAN Qing. Lithium Tantalate Wafer: Advances in Thinning Technology and Application in Pyroelectric Infrared Detectors [J]. Journal of Inorganic Materials, 2026, 41(6): 764-774.
[4]	LIU Chunfan, CHEN Ke, GE Fangfang, HUANG Qing. Research Progress on Lead-bismuth Eutectic Corrosion Resistant Coatings [J]. Journal of Inorganic Materials, 2026, 41(6): 775-786.
[5]	HU Yang, XIE Min, ZHANG Xiaoyi, LI Xiang, GUO Xinwei, JIANG Nan, ZHOU Wenhan, ZHANG Shengli, ZENG Haibo. Research Progress on Computational and Data-driven Environmental-friendly Luminescent Materials [J]. Journal of Inorganic Materials, 2026, 41(6): 704-722.
[6]	WANG Junbu, HUANG Zeai, YANG Mingkai, MENG Ying, ZHOU Mingwei, ZHOU Ying. Research Progress on Anti-coking Catalytic Materials for Methane Conversion [J]. Journal of Inorganic Materials, 2026, 41(6): 739-750.
[7]	WANG Jinwen, YANG Zhen, ZHOU Huan, XIA Dan, YANG Lei. Biomedical Applications of Injectable Inorganic Biomaterials [J]. Journal of Inorganic Materials, 2026, 41(6): 751-763.
[8]	LI Hantao, SHEN Qiang, LUO Guoqiang, WANG Xuefei, GAO Ming, CHEN Chen. Research Progress on Structure and Performance Regulation of Silicon-based Anode Materials via Mechanical Ball Milling [J]. Journal of Inorganic Materials, 2026, 41(5): 561-572.
[9]	XIE Chenyi, MIAO Huaming, ZHANG Weiran, LIU Rongjun, WANG Yanfei, LI Duan. Research Progress on Theoretical Calculation in the Field of High-entropy Ceramics [J]. Journal of Inorganic Materials, 2026, 41(5): 545-560.
[10]	LI Xuan, YE Kuicai, FENG Jiayin, QIU Jiajun, QIAN Wenhao, XING Min. Surface Modification of Titanium-based Dental Implants for Soft Tissue Sealing: A Review [J]. Journal of Inorganic Materials, 2026, 41(4): 432-444.
[11]	PENG Dezhao, LI Rui, WANG Wenhong, WANG Zirui, ZHANG Zhizhen. Research Progress on Sodium Chloride Solid Electrolytes [J]. Journal of Inorganic Materials, 2026, 41(4): 409-420.
[12]	CHEN Kun, JIANG Yonggang, FENG Junzong, LI Liangjun, HU Yijie, FENG Jian. Research Progress on Lanthanum Zirconate Porous Materials for Thermal Insulation [J]. Journal of Inorganic Materials, 2026, 41(4): 421-431.
[13]	WEI Lianjin, QI Zhijie, WANG Xin, ZHU Junwu, FU Yongsheng. Modification of Nanodiamond and Its Application in Electrocatalytic Oxygen Reduction Reaction [J]. Journal of Inorganic Materials, 2026, 41(3): 273-288.
[14]	LIU Zhanyi, LI Mian, OUYANG Xiaoping, CHAI Zhifang, HUANG Qing. Recent Progress on Removal of Sr/Cs from Molten Salt in Dry Reprocessing [J]. Journal of Inorganic Materials, 2026, 41(2): 150-158.
[15]	SUN Lian, ZHANG Leilei, XUE Zexu, WU Kun, CHEN Ye, LI Zhiyuan, WANG Lukai, WANG Zungang. Research Progress on Zero-dimensional Metal Halide Scintillators towards Radiation Detection Applications [J]. Journal of Inorganic Materials, 2026, 41(2): 159-176.