C/SiC复合材料在超燃冲压发动机中的应用研究进展

doi:10.3724/SP.J.1077.2013.12466

无机材料学报 ›› 2013, Vol. 28 ›› Issue (3): 247-255.DOI: 10.3724/SP.J.1077.2013.12466 CSTR: 32189.14.SP.J.1077.2013.12466

C/SiC复合材料在超燃冲压发动机中的应用研究进展

马青松¹, 刘海韬^1,2, 潘余², 刘卫东², 陈朝辉¹

(国防科技大学 1. 新型陶瓷纤维及其复合材料重点实验室; 2. 高超声速冲压发动机技术重点实验室, 长沙 410073)

收稿日期:2012-08-07 修回日期:2012-10-10 出版日期:2013-03-20 网络出版日期:2013-02-20
基金资助:
国家自然科学基金重大研究计划(90916002, 91116001); 湖南省高校科技创新团队支持计划

Research Progress on the Application of C/SiC Composites in Scramjet

MA Qing-Song¹, LIU Hai-Tao^1,2, PAN Yu², LIU Wei-Dong², CHEN Zhao-Hui¹

(1. Science and Technology on Advanced Ceramic Fibers &Composites Laboratory, National University of Defense Technology, Changsha 410073, China; 2. Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha 410073, China)

Received:2012-08-07 Revised:2012-10-10 Published:2013-03-20 Online:2013-02-20
Supported by:
Grand Research Project of National Natural Science Foundation of China (90916002, 91116001); Aid program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province

摘要/Abstract

摘要： 超燃冲压发动机是发展高超声速技术的核心, 以其为动力装置的各类高超声速飞行器对于国防安全和航天运输都有重要意义。本文分析了超燃冲压发动机对热防护材料的要求, 综述了C/SiC复合材料在超燃冲压发动机中的应用研究现状, 提出了发展建议, 指出了需要关注的关键问题。

关键词: C/SiC复合材料, 热防护, 主动冷却, 超燃冲压发动机, 综述

Abstract: Scramjet is crucial to develop hypersonic technology. The hypersonic vehicles with scramjet as power device are of much significance for national defense security and space transportation. In this paper, the requirements for thermal protection materials of scramjet were analyzed and current status of the application of C/SiC composites in scramjet was reviewed. At last, the development proposals and key problems needed to be solved for C/SiC composites were offered in order to meet the demands of scramjet.

Key words: C/SiC composites, thermal protection, active cooling, scramjet, review

中图分类号:

TB323

马青松, 刘海韬, 潘余, 刘卫东, 陈朝辉. C/SiC复合材料在超燃冲压发动机中的应用研究进展[J]. 无机材料学报, 2013, 28(3): 247-255.

MA Qing-Song, LIU Hai-Tao, PAN Yu, LIU Wei-Dong, CHEN Zhao-Hui. Research Progress on the Application of C/SiC Composites in Scramjet[J]. Journal of Inorganic Materials, 2013, 28(3): 247-255.

参考文献

[1] LIU Xiao-Yong. Scramjet technology. Journal of Propulsion Technology, 2003(2): 38–42.

[2] Voland R T, Huebner L D, McClinton C R. X-43A hypersonic vehicle technology development. Acta Astronautica, 2006, 59(1-5): 181–191.

[3] WANG Zhen-Guo, LIANG Jian-Han, DING Meng, et al. A review on hypersonic airbreathing propulsion system. Advances in Mechanics, 2009, 39(6): 716–739.

[4] MA Jie, LIANG Jun-Long. Development trends and directions of liquid ramjet/scramjet technology. Journal of Rocket Propulsion, 2011, 37(4): 12–17.

[5] REN Jia-Wan, TAN Yong-Hua. Thermal protection techniques of ramjet combustor. Journal of Rocket Propulsion, 2006, 32(4): 38–42.

[6] Wie D M, Drewry D G, King D E, et al. The hypersonic environment: required operating conditions and design challenges. Journal of Materials Science, 2004, 39(19): 5915–5924.

[7] Jackson T A, Eklund D R, Fink A J. High speed propulsion: performance advantage of advanced materials. Journal of Materials Science, 2004, 39(19): 5905–5913.

[8] ZHANG Quan-Ming. Research on CMC for aerospace applications. Aerospace Materials &Technology, 2011(6): 1–3.

[9] LIU Zhi-Quan, MA Wu-Jun. Applied research of rocket engine thrusters made of ceramic matrix composite. Journal of Rocket Propulsion, 2011, 37(2): 19–24.

[10] Glass D E. Ceramic Matrix Composite (CMC) Thermal Protection Systems (TPS) and Hot Structures for Hypersonic Vehicles. AIAA 2008–2682.

[11] Beyer S, Strobe F, Knabe H. Development and Testing of C/SiC Components for Liquid Rocket Propulsion Applications. AIAA 99–2896.

[12] Wang Y G, Liu W, Cheng L F, et al. Preparation and properties of 2D C/ZrB2-SiC ultra high temperature ceramic composites. Materials Science &Engineering A, 2009, 524(1/2): 129–133.

[13] ZHANG Li-Tong, CHENG Lai-Fei, XU Yong-Dong. Progress in research work of new CMC-SiC. Aeronautic Manufacturing Technology, 2003(1): 24–32.

[14] Bouquet C, Fischer R, Thebault J, et al. Composite Technologies Development Status for Scramjet. AIAA 2005–3431.

[15] Dirling R B. Progress in Materials and Structures Evaluation for the HyTech program. AIAA 98–1591.

[16] Chen F F, Tam W F, Shimp N R, et al. An Innovative Thermal Management System for a Mach 4 to Mach 8 Hypersonic Scramjet engine. AIAA 98–3734

[17] Sillence M A. Hydrocarbon Scramjet Engine Technology Flowpath Component Development. AIAA 2002–5158.

[18] Haug T, Ehrmann U, Knabe H. Air Intake Ramp Made from C/Sic via the Polymer Route for Hypersonic Propulsion Systems. AIAA 93–5036.

[19] Paquette E. Cooled CMC Structures for Scramjet Engine Flowpath Components. AIAA 2005–3432.

[20] Bouquet C, Lacombe A, Hauber B, et al. Ceramic Matrix Composites Cooled Panel Development for Advanced Propulsion Systems. AIAA 2004–1998.

[21] Bouquet C, Fischer R, Bouhali A L, et al. Fully Ceramic Composite Heat Exchanger Qualification for Advanced Combustion Chambers. AIAA 2005–3433.

[22] Steel S. Ceramic materials for reusable liquid fueled rocket engine combustion devices. The AMPTIAC Quarterly, 2004, 8(1): 39–43.

[23] Jaskowiak M H. Cooled ceramic composite panel tested successfully in rocket combustion facility. http://www.grc.nasa.gov/ WWW/RT2002/5000/5130jaskowiak.html.

[24] Bouchez M, Beyer S. PTAH-SOCAR Fuel-cooled Composite Materials Structure: 2009 status. AIAA 2009–7353.

[25] Bouchez M, Beyer S. PTAH-SOCAR Fuel-cooled Composite Materials Structure for Dual-mode Ramjet and Liquid Rocket Engines-2005 status. AIAA 2005–3434.

[26] Ortelt M, Hald H, Fischer I, et al. Empirical Verification of Effusion Cooled CMC Rocket thrust Chambers. AIAA 2005–3569.

[27] Mehta J M, Shouse D, Cox B, et al. Innovative SiC-SiC Ceramic Liner for the Trapped Vortex Combustor (TVC) Concept. AIAA 2004–689.

[28] Ohlhorst C W, Glass D E, Bruce W E, et al. Development of X-43A Mach10 Leading edges. IAC-05-D2.5.06, 2005.

[29] Li Q G, Zhou H J, Dong S M, et al. Fabrication and comparison of 3D Cf/ZrC-SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane. Ceramics International, 2012, 38(6): 5271–5275.

[30] Padmavathi N, Kumari S, Prasad V V B, et al. Processing of carbon- fiber reinforced (SiC+ZrC) mini-composites by soft-solution approach and their characterization. Ceramics International, 2009, 35(8): 3447–3454.

[31] Va?en R, Jarligo M O, Steinke T, et al. Overview on advanced thermal barrier coatings. Surface & Coatings Technology, 2010, 205(4): 938–942.

[32] Blum Y D, Marschall J, Hui D, et al. Thick protective UHTC coatings for SiC-based structures: process establishment. Journal of the American Ceramic Society, 2008, 91(5): 1453–1460.

[33] Liu Q, Zhang L T, Liu J, et al. The oxidation behavior of SiC-ZrC-SiC-coated C/SiC minicomposites at ultrahigh temperatures. Journal of the American Ceramic Society, 2010, 93(12): 3990–3992.

[34] Xiang Y, Li W, Wang S, et al. Ablative property of ZrC-SiC multilayer coating for PIP-C/SiC composites under oxy-acetylene torch. Ceramics International, 2012, 38(4): 2893–2897.

[35] Liedtke V, Olivares I H, Langer M, et al. Manufacturing and performance testing of Sol/Gel based oxidation protection systems for re-usable space vehicles. Journal of the European Ceramic Society, 2007, 27(2/3): 1493–1502.

[36] GUO Chao-Bang, NIU Wen, LIU Wen-Jie. Research progress in TPS and thermal structure technology of HTV-2 vehicle. Winged Missiles Journal, 2012(1): 92–98.

[37] Wulz H G, Stark H, Trabandt U. Joining and Load Transfer Technology for Hot CMC Structures. AIAA 2000–2435.

[38] Paquette E L, Palko J. Hypersonic Airframe and Propulsion Seal preload Device Development for 2300F service. AIAA 2004–3888.

[39] Peng L N, He G Q, Liu P J. Experimental and Numerical Investigation of Active Cooling Ceramic Matrix Composite for Ramjet Propulsion System. AIAA 2009–5462.

编辑推荐 0

Metrics

阅读次数

全文

1928

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	1	0	0	1927

来源	本网站	其他网站

次数	674	1254
比例	35%	65%

摘要

1278

最新录用	在线预览	正式出版

0	0	1278

来源	本网站	其他网站

次数	240	1038
比例	19%	81%

C/SiC复合材料在超燃冲压发动机中的应用研究进展

Research Progress on the Application of C/SiC Composites in Scramjet

RichHTML

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐 0

Metrics

本文评价

[1]	魏相霞, 张晓飞, 徐凯龙, 陈张伟. 增材制造柔性压电材料的现状与展望[J]. 无机材料学报, 2024, 39(9): 965-978.
[2]	杨鑫, 韩春秋, 曹玥晗, 贺桢, 周莹. 金属氧化物电催化硝酸盐还原合成氨研究进展[J]. 无机材料学报, 2024, 39(9): 979-991.
[3]	刘鹏东, 王桢, 刘永锋, 温广武. 硅泥在锂离子电池中的应用研究进展[J]. 无机材料学报, 2024, 39(9): 992-1004.
[4]	全文心, 余艺平, 方冰, 李伟, 王松. 管状C/SiC复合材料高温空气氧化行为与宏细观建模研究[J]. 无机材料学报, 2024, 39(8): 920-928.
[5]	黄洁, 汪刘应, 王滨, 刘顾, 王伟超, 葛超群. 基于微纳结构设计的电磁性能调控研究进展[J]. 无机材料学报, 2024, 39(8): 853-870.
[6]	陈乾, 苏海军, 姜浩, 申仲琳, 余明辉, 张卓. 超高温氧化物陶瓷激光增材制造及组织性能调控研究进展[J]. 无机材料学报, 2024, 39(7): 741-753.
[7]	王伟明, 王为得, 粟毅, 马青松, 姚冬旭, 曾宇平. 以非氧化物为烧结助剂制备高导热氮化硅陶瓷的研究进展[J]. 无机材料学报, 2024, 39(6): 634-646.
[8]	蔡飞燕, 倪德伟, 董绍明. 高熵碳化物超高温陶瓷的研究进展[J]. 无机材料学报, 2024, 39(6): 591-608.
[9]	吴晓晨, 郑瑞晓, 李露, 马浩林, 赵培航, 马朝利. SiC_f/SiC陶瓷基复合材料高温环境损伤原位监测研究进展[J]. 无机材料学报, 2024, 39(6): 609-622.
[10]	赵日达, 汤素芳. 多孔碳陶瓷化改进反应熔渗法制备陶瓷基复合材料研究进展[J]. 无机材料学报, 2024, 39(6): 623-633.
[11]	方光武, 谢浩元, 张华军, 高希光, 宋迎东. CMC-EBC损伤耦合机理及一体化设计研究进展[J]. 无机材料学报, 2024, 39(6): 647-661.
[12]	张幸红, 王义铭, 程源, 董顺, 胡平. 超高温陶瓷复合材料研究进展[J]. 无机材料学报, 2024, 39(6): 571-590.
[13]	张慧, 许志鹏, 朱从潭, 郭学益, 杨英. 大面积有机-无机杂化钙钛矿薄膜及其光伏应用研究进展[J]. 无机材料学报, 2024, 39(5): 457-466.
[14]	李宗晓, 胡令祥, 王敬蕊, 诸葛飞. 氧化物神经元器件及其神经网络应用[J]. 无机材料学报, 2024, 39(4): 345-358.
[15]	鲍可, 李西军. 化学气相沉积法制备智能窗用热致变色VO₂薄膜的研究进展[J]. 无机材料学报, 2024, 39(3): 233-258.