Journal of Inorganic Materials ›› 2017, Vol. 32 ›› Issue (3): 305-312.DOI: 10.15541/jim20160183

• Orginal Article • Previous Articles     Next Articles

A New Porous Zirconium Phosphonate Hybride Material and Its Adsorption Properties

ABUBAKER Abutartour, LOTFIA El-Majdoub, SHI Ya-Sai, LI Ni-Li, XU Qing-Hong   

  1. (State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China)
  • Received:2016-03-28 Revised:2016-05-05 Published:2017-03-20 Online:2017-02-24
  • About author:Abubaker Abutartour. E-mail: abobakerabase@yahoo.com

Abstract:

Synthesis of organic-inorganic hybrid hierarchical porous materials with strong ligand in framework is an important field of current research in adsorption. A new kind of inorganic/organic hierarchical zirconium phosphonate material (ZrPTA) with porous structure was prepared from bis(hexamethylene)triamino-N, N-bisacetyl- phosphonic acid and ZrOCl2·8H2O in water solution by using hydrothermal synthesis technology. The samples were characterized by FT-IR spectroscope, TGA, XRD, XPS, SEM and element analysis. The results show that the material possesses a rod-like morphology, and the rods contain micropores of 1.38 nm and 1.93 nm in diameter, mesopores of 2.99 nm in diameter, and a surface area of ~112.2 m2/g. The as-prepared ZrPTA is more efficient in removing Pb2+, Cu2+ and Cd2+ from wastewater. Its maximum adsorption capacities for Pb2+, Cu2+ and Cd2+ are 742.7, 689.8 and 627.0 mg/g, respectively, which is much higher than the maximum adsorption capacities of the adsorbents reported. The perfect properties make the material good prospects in application as an adsorbent in wastewater processing.

Key words: zirconium phosphonate, porous materials, hydrothermal synthesis, interfaces, adsorption

CLC Number: