Journal of Inorganic Materials

• Research Letter •    

Fabrication and Electromagnetic Wave Absorption Properties of High-entropy Boride Ceramic Powders via Polymer-derived Ceramic Route

ZHU Wenqi, GUO Linwei, Li Xin, DU Bin   

  1. School of Physics and Materials Science, Guangzhou University, Guangzhou 510006, China
  • Received:2026-05-20 Revised:2026-08-12
  • Contact: DU Bin, associate professor. E-mail: dubin@gzhu.edu.cn
  • About author:ZHU Wenqi (2003–), male, Master candidate. E-mail: 2990217991@qq.com
  • Supported by:
    Guangzhou Municipal Basic Research Program - Jointly Funded by Municipal Government, Universities, Research Institutes and Enterprises (SL2024A03J00679)

Abstract: High-entropy borides (HEBs) have attracted considerable attention as promising electromagnetic wave-absorption materials owing to their exceptional high-temperature stability and complex compositional. However, the relationships among composition, microstructure and electromagnetic properties in HEBs remain poorly understood. In this study, single-phase (Hf0.25Zr0.25Nb0.25Ta0.25)B2 high-entropy boride (HEB) powders were successfully synthesized via a polymer-derived ceramic (PDC) route using transition metal precursors, phenolic resin, and tetrahydroxydiboron as starting materials, followed by high-temperature pyrolysis. The phase composition, microstructure, electromagnetic parameters, and microwave absorption properties of the synthesized powders were systematically investigated. A single-phase AlB2-type hexagonal structure was obtained after pyrolysis at 2100 ℃ for 2 h, and the HEB powders consisted of irregular polyhedral particles uniformly encapsulated by an in-situ formed amorphous carbon layer with a thickness of approximately 3 nm. Pronounced lattice distortion was also observed, characteristic of the high-entropy effect. Electromagnetic characterization showed that both the complex permittivity and dielectric loss capability increased with filler loading. Cole-Cole plots indicated the coexistence of multiple polarization relaxation processes. At a filler loading of 50% (in mass), the composite exhibited the optimal microwave absorption performance, achieving a minimum reflection loss (RLmin) of -16.30 dB at 15.45 GHz with a matching thickness of 2.87 mm. Furthermore, impedance matching and attenuation constant analyses demonstrated that the HEB/amorphous-carbon heterostructure effectively enhanced the electromagnetic wave attenuation through the synergistic contributions of conduction loss, dipolar polarization, and interfacial polarization. These findings demonstrate that the PDC route provides an effective strategy for the controlled synthesis of high-entropy borides and offers new insights into the design and performance optimization of high-temperature microwave-absorbing ceramic materials.

Key words: high-entropy boride ceramic, polymer-derived ceramic, powder, complex permittivity, microwave absorption property

CLC Number: