CsPbBr3@TiO2核壳结构纳米复合材料用作水稳高效可见光催化剂

doi:10.15541/jim20200358

无机材料学报 ›› 2021, Vol. 36 ›› Issue (5): 507-512.DOI: 10.15541/jim20200358 CSTR: 32189.14.10.15541/jim20200358

所属专题：【虚拟专辑】钙钛矿材料(2020~2021)

CsPbBr₃@TiO₂核壳结构纳米复合材料用作水稳高效可见光催化剂

肖翔(), 郭少柯, 丁成, 张志洁(), 黄海瑞, 徐家跃()

上海应用技术大学材料科学与工程学院, 上海 201418

收稿日期:2020-06-30 修回日期:2020-08-27 出版日期:2021-05-20 网络出版日期:2021-04-19
通讯作者: 张志洁, 副教授. E-mail: zjzhang@sit.edu.cn; 徐家跃, 教授. E-mail: xujiayue@sit.edu.cn
作者简介:肖翔(1995-), 男, 硕士研究生. E-mail:18856267707@163.com
基金资助:
国家自然科学基金(51972213)

CsPbBr₃@TiO₂ Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst

XIAO Xiang(), GUO Shaoke, DING Cheng, ZHANG Zhijie(), HUANG Hairui, XU Jiayue()

School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai 201418, China

Received:2020-06-30 Revised:2020-08-27 Published:2021-05-20 Online:2021-04-19
Contact: ZHANG Zhijie, associate professor. E-mail: zjzhang@sit.edu.cn; XU Jiayue, professor. E-mail: xujiayue@sit.edu.cn
About author:XIAO Xiang(1995-), male, Master candidate. E-mail:18856267707@163.com
Supported by:
National Natural Science Foundation of China(51972213)

摘要/Abstract

摘要：

CsPbBr₃钙钛矿量子点在水中的不稳定性一直是限制其应用的关键因素。本工作采用钛酸四丁酯水解结合煅烧的方法在CsPbBr₃表面包覆TiO₂保护层, 制备了一种具有良好水稳定性和光催化活性的CsPbBr₃@TiO₂核壳结构纳米复合材料。所合成的CsPbBr₃钙钛矿量子点尺寸约为8 nm, 包覆层为不完全结晶的TiO₂, 其厚度约为20 nm。采用在可见光下降解水中有机污染物罗丹明B表征了CsPbBr₃@TiO₂复合材料的光催化性能。结果表明, CsPbBr₃@TiO₂复合材料的光催化性能远优于纯TiO₂和CsPbBr₃钙钛矿量子点。光电流测试结果表明, CsPbBr₃和TiO₂形成的异质结构能够促进光生载流子的分离, 从而提升CsPbBr₃@TiO₂复合材料光催化性能。更重要的是, TiO₂可以作为CsPbBr₃的保护层将CsPbBr₃和水分隔开来, 使得CsPbBr₃@TiO₂复合材料具有很好的水稳定性。经过光催化降解污染物之后, 回收的CsPbBr₃@TiO₂复合材料的形貌、发光和光催化性能保持不变。

关键词: CsPbBr₃@TiO₂, 纳米复合材料, 光催化, 电荷分离

Abstract:

The inherent poor stability of CsPbBr₃ perovskite quantum dots (QDs) is the main impediment restricting their applications. In this work, a CsPbBr₃@TiO₂ core-shell structure nanocomposite with high water stability and efficient photocatalytic activity was fabricated through the hydrolysis of tetrabutyl titanate, followed by calcination. The as-prepared CsPbBr₃QDs have a size of ca. 8 nm, encapsulated by incompletely crystallized TiO₂protective layer with a thickness of ca. 20 nm. The photocatalytic performance of the CsPbBr₃@TiO₂ nanocomposite was investigated by degradation of Rhodamine B (RhB) in water under visible light irradiation. The result shows that the CsPbBr₃@TiO₂ nanocomposite exhibits much more enhanced photocatalytic activity than pure TiO₂ and CsPbBr₃ perovskite quantum dots. The photocurrent test results showed that the formation of the CsPbBr₃@TiO₂heterostructure can promote the separation of photogenerated carriers, which led to the improvement of photocatalytic performance of the composite material. More importantly, TiO₂ can act as a protective layer to separate CsPbBr₃ from water, which brings about the high water stability of the CsPbBr₃@TiO₂ nanocomposite. After photocatalytic degradation of pollutants, the recovered CsPbBr₃@TiO₂ nanocomposite retained its original morphology, luminescent and photocatalytic properties.

Key words: CsPbBr₃@TiO₂, nanocomposite, photocatalysis, charge separation

中图分类号:

O643

肖翔, 郭少柯, 丁成, 张志洁, 黄海瑞, 徐家跃. CsPbBr₃@TiO₂核壳结构纳米复合材料用作水稳高效可见光催化剂[J]. 无机材料学报, 2021, 36(5): 507-512.

XIAO Xiang, GUO Shaoke, DING Cheng, ZHANG Zhijie, HUANG Hairui, XU Jiayue. CsPbBr₃@TiO₂ Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst[J]. Journal of Inorganic Materials, 2021, 36(5): 507-512.

图/表 6

图1 CsPbBr3、TiO2和CsPbBr3@TiO2的XRD图谱

Fig. 1 XRD patterns of CsPbBr3, TiO2 and CsPbBr3@TiO2

图2 CsPbBr3(a)和CsPbBr3@TiO2(b)的TEM照片; (c)CsPbBr3@TiO2的高分辨TEM照片

Fig. 2 TEM images of CsPbBr3 (a) and CsPbBr3@TiO2 (b), and (c) HRTEM image of CsPbBr3@TiO2

图3 CsPbBr3、TiO2和CsPbBr3@TiO2的傅里叶变换红外光谱

Fig. 3 FT-IR spectra of CsPbBr3, TiO2 and CsPbBr3@TiO2

图4 (a)CsPbBr3@TiO2的XPS全谱图; (b)Ti2p和(c)O1s的XPS 高分辨分峰拟合谱

Fig. 4 Survey XPS spectrum of CsPbBr3@TiO2 (a), and high resolution XPS spectra of Ti2p (b) and O1s (c)

图5 (a) CsPbBr3、TiO2和CsPbBr3@TiO2 在可见光下降解罗丹明B的光催化性能比较; (b)降解实验后回收的CsPbBr3@TiO2复合材料的TEM照片; (c)降解实验前后CsPbBr3@TiO2的PL光谱对比图; (d) CsPbBr3@TiO2降解罗丹明B的循环实验

Fig. 5 (a) Comparison of photocatalytic activities of CsPbBr3, TiO2 and CsPbBr3@TiO2 for degradation of Rhodamine B under visible light irradiation; (b) TEM image of recycled CsPbBr3@TiO2 after the degradation experiment; (c) Comparison of PL spectra of CsPbBr3@TiO2 before and after the degradation experiment; (d) Cycle runs of the photocatalytic degradation of RhB over CsPbBr3@TiO2

图6 (a)CsPbBr3、TiO2和CsPbBr3@TiO2的光电流; (b)CsPbBr3@TiO2复合材料的光催化机理示意图

Fig. 6 (a) Photocurrent responses of CsPbBr3, TiO2 and CsPbBr3@TiO2, and (b) Photocatalytic mechanism of CsPbBr3@TiO2 composite

参考文献 28

[1]	ZHOU H, CHEN Q, LI G, et al. Interface engineering of highly efficient perovskite solar cells. Science, 2014,345(6196):542-546. DOI URL PMID
[2]	LÜ W Z, LI L, XU M C, et al. Improving the stability of metal halide perovskite quantum dots by encapsulation. Advanced Materials, 2019,31(28):1900682.
[3]	LI X M, WU Y, ZHANG S L, et al. CsPbX₃ quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes. Advanced Functional Materials, 2016,26(15):2435-2445.
[4]	LIUY , LI F S, LI Q Q, et al. Emissions at perovskite quantum dot/film interface with halide anion exchange. ACS Photonics, 2018,5(11):4504-4512.
[5]	PARK S, CHANG W J, LEE C W, et al. Photocatalytic gydrogen generation from hydriodic acid using methylammonium lead iodide in dynamic equilibrium with aqueous solution. Nature Energy, 2016,2(1):16185.
[6]	HA S T, SU R, XING J, et al. Metal halide perovskite nanomaterials: synthesis and applications. Chemical Science, 2017,8(4):2522-2536. URL PMID
[7]	LI X, CAO F, YU D, et al. All inorganic halide perovskites nanosystem: synthesis, structural features, optical properties and optoelectronic applications. Small, 2017,13(9):1603996.
[8]	AKKERMAN Q A, RAINO G, KOVALENKO M V, et al. Genesis challenges and opportunities for colloidal lead halide perovskite nanocrystals. Nature Materials, 2018,17(5):394. URL PMID
[9]	BAI S, YUAN Z, GAO F, et al. Colloidal metal halide perovskite nanocrystals: synthesis characterization and applications. Journal of Materials Chemistry C, 2016,4(18):3898-3904.
[10]	ATOURKI L, VEGA E, MAN B, et al. Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI₃-_xBr_x(0≤x≤1) films. Applied Surface Science, 2016,371:112-117.
[11]	OTTO T, MULLER M, MUNDRA P, et al. Colloidal nanocrystals embedded in macrocrystals: robustness, photostability, and color purity. Nano Letters, 2012,12(10):5348-5354. URL PMID
[12]	HANSKE C, HILL E H, VILA-LIARTE D, et al. Solvent-assisted self-assembly of gold nanorods into hierarchically organized plasmonic mesostructures. ACS Applied Materials & Interfaces, 2019,11(12):11763-11771. DOI URL PMID
[13]	SHAO H, BAI X, PAN G, et al. Highly efficient and stable blue-emitting CsPbBr₃@SiO₂ nanospheres through low temperature synthesis for nanoprinting and wled. Nanotechnology, 2018,29(28):285706. URL PMID
[14]	LOIUDICE A, SARIS S, OVEISI E, et al. CsPbBr₃ QD/AlO_x inorganic nanocomposites with exceptional stability in water light and heat. Angewandte Chemie International Edition, 2017,56(53):10696-10701.
[15]	LIAO J F, XU Y F, WANG X D, et al. CsPbBr₃ nanocrystal/MO₂(M=Si, Ti, Sn) composites: insight into charge-carrier dynamics and photoelectrochemical applications. ACS Applied Materials & Interfaces, 2018,10(49):42301-42309. URL PMID
[16]	LIU S, HE M, DI X, et al. CsPbX₃ nanocrystals films coated on YAG: Ce³+ pig for warm white lighting source. Chemical Engineering Journal, 2017,330:823-830.
[17]	XIN Y, ZHAO H, ZHANG J, et al. Highly stable and luminescent perovskite-polymer composites from a convenient and universal strategy. ACS Applied Materials & Interfaces, 2018,10(5):4971-4980. URL PMID
[18]	ZHOU Q, BAI Z, LU W G, et al. In situ fabrication of halide perovskite nanocrystal-embedded polymer composite films with enhanced photoluminescence for display backlights. Advanced Materials, 2016,28(41):9163-9168. URL PMID
[19]	LI Z J, HOFMAN E, LI J, et al. Photoelectrochemically active and environmentally stable CsPbBr₃/TiO₂ core/shell nanocrystals. Advanced Functional Materials, 2018,28(1):1704288.
[20]	PROTESESCU L, YAKUNIN S, BODNARCHUK M I, et al. Nanocrystals of cesium lead halide perovskites (CsPbX₃, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Letters, 2015,15(6):3692-3696. URL PMID
[21]	FANG X X. Construction of highly ordered ZnO-TiO₂ nanotube arrays (ZnO/TNTs) heterostructure for photocatalytic application. ACS Applied Materials & Interfaces, 2012,4(12):7055-7063. DOI URL PMID
[22]	GUO W, LIN Z, WANG X, et al. Sonochemical synthesis of nanocrystalline TiO₂ by hydrolysis of titanium alkoxides. Microelectronic Engineering, 2003,66(1-4):95-101.
[23]	YANG J, WANG Y, LI W, et al. Amorphous TiO₂ shells: a vital elastic buffering layer on silicon nanoparticles for high-performance and safe lithium storage. Advanced Materials, 2017,29(48):1700523.
[24]	KIM H G, BORSE P H, CHOI W Y, et al. Photocatalytic nanodiodes for visible light photocatalysis. Angewandte Chemie International Edition, 2005,44(29):4585-4589. URL PMID
[25]	ZHOU D, ZHI C, QIAN Y, et al. In-situ construction of all-solid-state Z-scheme g-C₃N₄/TiO₂ nanotube arrays photocatalyst with enhanced visible-light-induced properties. Solar Energy Materials and Solar Cells, 2016,157:399-405.
[26]	ZHOU J, CHEN W, SUN C, et al. Oxidative polyoxometalates modified graphitic carbon nitride for visible-light CO₂ reduction. ACS Applied Materials & Interfaces, 2017,9(13):11689-11695. URL PMID
[27]	DONG Y, QIAO T, KIM D, et al. Precise control of quantum confinement in cesium lead halide perovskite quantum dots via thermodynamic equilibrium. Nano Letters, 2018,18(6):3716-3722. DOI URL PMID
[28]	LEE S, LEE K, KIM W D, et al. Thin amorphous TiO₂ shell on CdSe nanocrystal quantum dots enhances photocatalysis of hydrogen evolution from water. The Journal of Physical Chemistry C, 2014,118(41):23627-23634.

CsPbBr₃@TiO₂核壳结构纳米复合材料用作水稳高效可见光催化剂

CsPbBr₃@TiO₂ Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 6

参考文献 28

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈莉波, 盛盈, 伍明, 宋季岭, 蹇建, 宋二红. Na和O元素共掺杂氮化碳高效光催化制氢[J]. 无机材料学报, 2025, 40(5): 552-562.
[2]	范小暄, 郑永炅, 徐丽荣, 姚子敏, 曹硕, 王可心, 王绩伟. 基于富氧空位LiYScGeO₄: Bi³⁺长余辉光催化剂的自激活余辉驱动有机污染物芬顿降解[J]. 无机材料学报, 2025, 40(5): 481-488.
[3]	贾相华, 张辉霞, 刘艳凤, 左桂鸿. 湿化学法制备Cu₂O/Cu空心球异质结光催化剂[J]. 无机材料学报, 2025, 40(4): 397-404.
[4]	马彬彬, 钟婉菱, 韩涧, 陈椋煜, 孙婧婧, 雷彩霞. ZIF-8/TiO₂复合介观晶体的制备及光催化活性[J]. 无机材料学报, 2024, 39(8): 937-944.
[5]	曹青青, 陈翔宇, 吴健豪, 王筱卓, 王乙炫, 王禹涵, 李春颜, 茹菲, 李兰, 陈智. SiO₂增强自敏性氮化碳微球可见光降解盐酸四环素的研究[J]. 无机材料学报, 2024, 39(7): 787-792.
[6]	王兆阳, 秦鹏, 蒋胤, 冯小波, 杨培志, 黄富强. 三明治结构钌插层二氧化钛光催化四环素降解性能研究[J]. 无机材料学报, 2024, 39(4): 383-389.
[7]	叶茂森, 王耀, 许冰, 王康康, 张胜楠, 冯建情. II/Z型Bi₂MoO₆/Ag₂O/Bi₂O₃异质结可见光催化降解四环素[J]. 无机材料学报, 2024, 39(3): 321-329.
[8]	李雷, 程群峰. 高性能MXenes纳米复合材料研究进展[J]. 无机材料学报, 2024, 39(2): 153-161.
[9]	李秋实, 殷广明, 吕伟超, 王怀尧, 李婧琳, 杨红光, 关芳芳. Na⁺/g-C₃N₄材料的制备及光催化降解亚甲基蓝机理[J]. 无机材料学报, 2024, 39(10): 1143-1150.
[10]	李跃军, 曹铁平, 孙大伟. S型异质结Bi₄O₅Br₂/CeO₂的制备及其光催化CO₂还原性能[J]. 无机材料学报, 2023, 38(8): 963-970.
[11]	伍林, 胡明蕾, 王丽萍, 黄少萌, 周湘远. TiHAP@g-C₃N₄异质结的制备及光催化降解甲基橙[J]. 无机材料学报, 2023, 38(5): 503-510.
[12]	凌洁, 周安宁, 王文珍, 贾忻宇, 马梦丹. Cu/Mg比对Cu/Mg-MOF-74的CO₂吸附性能的影响[J]. 无机材料学报, 2023, 38(12): 1379-1386.
[13]	孙晨, 赵昆峰, 易志国. 甲烷完全催化氧化研究进展[J]. 无机材料学报, 2023, 38(11): 1245-1256.
[14]	贾鑫, 李晋宇, 丁世豪, 申倩倩, 贾虎生, 薛晋波. Pd纳米颗粒协同氧空位增强TiO₂光催化CO₂还原性能[J]. 无机材料学报, 2023, 38(11): 1301-1308.
[15]	马润东, 郭雄, 施凯旋, 安胜利, 王瑞芬, 郭瑞华. MoS₂/g-C₃N₄ S型异质结的构建及光催化性能研究[J]. 无机材料学报, 2023, 38(10): 1176-1182.