Effects of Surface Modification on Solid Loading of Silicon Nitride Slurries

Abstract

Abstract: Surface modification of Si₃N₄ particles by acid leaching and its effects on the colloidal behavior and the flow properties of Si₃N₄ aqueous
slurries were investigated. The experimental results indicate that the isoelectric point of Si₃N₄ particles shifts to basic region after
modification due to the decreasing of the oxidizing degree on the surface of Si₃N₄ modified. Because the Zeta potential of Si₃N₄
particles increases efficiently, the flow properties of Si₃N₄ modified slurry significantly improve and the maximum solid loading
increases from 50 to 55vol.%. Moreover, the 53vol.% Si₃N₄ slurry suitable for casting was prepared.

Key words: silicon nitride, acid leaching, surface modification, slurry, solid loading

CLC Number:

TQ163

LIU Xue-Jian,HUANG Li-Ping,GU Hong-Chen,ZHANG Zhao-Quan,FU Xi-Ren. Effects of Surface Modification on Solid Loading of Silicon Nitride Slurries[J]. Journal of Inorganic Materials.

[1]	SUN Jing, LI Xiang, MAO Xiaojian, ZHANG Jian, WANG Shiwei. Effect of Lauric Acid Modifier on the Hydrolysis Resistance of Aluminum Nitride Powders [J]. Journal of Inorganic Materials, 2025, 40(7): 826-832.
[2]	WU Xiangquan, TENG Jiachen, JI Xiangxu, HAO Yubo, ZHANG Zhongming, XU Chunjie. Textured Porous Al₂O₃-SiO₂ Composite Ceramic Platelet-sphere Slurry: Characteristics and Simulation of Light Intensity Distribution [J]. Journal of Inorganic Materials, 2024, 39(7): 769-778.
[3]	JIANG Lingyi, PANG Shengyang, YANG Chao, ZHANG Yue, HU Chenglong, TANG Sufang. Preparation and Oxidation Behaviors of C/SiC-BN Composites [J]. Journal of Inorganic Materials, 2024, 39(7): 779-786.
[4]	SU Yi, SHI Yangfan, JIA Chenglan, CHI Pengtao, GAO Yang, MA Qingsong, CHEN Sian. Microstructure and Properties of C/HfC-SiC Composites Prepared by Slurry Impregnation Assisted Precursor Infiltration Pyrolysis [J]. Journal of Inorganic Materials, 2024, 39(6): 726-732.
[5]	CAI Heqing, HAN Lu, YANG Songsong, XUE Xinyu, ZHANG Kou, SUN Zhicheng, LIU Ruping, HU Kun, WEI Yan. Fe₃O₄-DMSA-PEI Magnetic Nanoparticles with Small Particle Size: Preparation and Gene Loading [J]. Journal of Inorganic Materials, 2024, 39(5): 517-524.
[6]	GUO Xiaoyang, ZHANG Xiaolin, JIANG Yan, TIAN Yuan, GENG Zhi. Ti-doped Hf(Zr)B₂-SiC Anti-ablation Coatings: Preparation and Ablation Resistance Mechanism [J]. Journal of Inorganic Materials, 2024, 39(12): 1357-1366.
[7]	FU Shi, YANG Zengchao, LI Jiangtao. Progress of High Strength and High Thermal Conductivity Si₃N₄ Ceramics for Power Module Packaging [J]. Journal of Inorganic Materials, 2023, 38(10): 1117-1132.
[8]	LI Honghua, DONG Wanru, WANG Liang, YANG Zengchao, LI Jiangtao. Consistency of Silicon Nitride Powders Produced by Combustion Synthesis: Evaluation and Application [J]. Journal of Inorganic Materials, 2023, 38(10): 1169-1175.
[9]	FU Shi, YANG Zengchao, LI Honghua, WANG Liang, LI Jiangtao. Mechanical Properties and Thermal Conductivity of Si₃N₄ Ceramics with Composite Sintering Additives [J]. Journal of Inorganic Materials, 2022, 37(9): 947-953.
[10]	WANG Shiwei. Progress of Spontaneous Coagulation Casting of Ceramic Slurries Based on Hydrophobic Interaction [J]. Journal of Inorganic Materials, 2022, 37(8): 809-820.
[11]	ZHANG Ye, ZENG Yuping. Progress of Porous Silicon Nitride Ceramics Prepared via Self-propagating High Temperature Synthesis [J]. Journal of Inorganic Materials, 2022, 37(8): 853-864.
[12]	ZHOU Ganghuai, LIU Yao, SHI Yuan, LIU Shaojun. Slurry Preparation and Stereolithography for Activated Alumina Catalyst Carrier [J]. Journal of Inorganic Materials, 2022, 37(3): 297-302.
[13]	LI Meng, HUANG Hailu, WU Jiamin, LIU Chunlei, WU Yaru, ZHANG Jingxian, SHI Yusheng. Effect of Solid Loading of Slurry on Properties of Si₃N₄ Ceramics Formed by Digital Light Processing [J]. Journal of Inorganic Materials, 2022, 37(3): 310-316.
[14]	LIU Guoqian, YAN Changhai, ZHANG Keqiang, JIN Hua, HE Rujie. Effect of Solid Loading on the Property of Al₂O₃ Ceramics in Stereolithographic Additive Manufacturing [J]. Journal of Inorganic Materials, 2022, 37(3): 353-360.
[15]	WANG Weide, CHEN Huanbei, LI Shishuai, YAO Dongxu, ZUO Kaihui, ZENG Yuping. Preparation of Silicon Nitride with High Thermal Conductivity and High Flexural Strength Using YbH₂-MgO as Sintering Additive [J]. Journal of Inorganic Materials, 2021, 36(9): 959-966.

Effects of Surface Modification on Solid Loading of Silicon Nitride Slurries

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments