Journal of Inorganic Materials

• Research Letter • Previous Articles     Next Articles

Fabrication, Corrosion Resistance and Electromagnetic Absorption Properties of Core-Shell Structured FeSiBCCr1.3@Al2O3Electromagnetic Composites

YU Yuan1,2,3, CHI Qiang4, XIE Yajie2, LI Yuanyuan2,3, Hu Renchao2,3, NING Mingqiang2,3, DONG Yaqiang2,3, MAN Qikui2,3, SHEN Baogen2,3   

  1. 1. School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, China;
    2. Laboratory of Magnetic Materials and Applications, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China;
    3. Zhejiang Key Laboratory of Magnetic Materials and Applications, Ningbo, 315201, China;
    4. Ningbo Zhongke Mag-Crystal New Material Technology Co.,LTD, Ningbo 315201, China
  • Received:2026-06-18 Revised:2026-07-28
  • Contact: NING Mingqiang, Associate professor. E-mail: ningmingqiang@nimte.ac.cn
  • About author:YU Yuan (2002–), female, Master candidate. E-mail: yuyuan@nimte.ac.cn
  • Supported by:
    National Natural Science Foundation of China (52102370); Zhejiang Provincial Key R&D Program (2024C01157); Jiangxi Provincial Major Science and Technology R&D Special Program(20233AAE2007)

Abstract: Amorphous alloys possess excellent comprehensive soft magnetic properties and have shown great potential for high-frequency electromagnetic (EM) wave absorption applications. However, their susceptibility to electrochemical corrosion in humid and salt-spray environments severely degrades their EM absorption performance, which underscores the necessity for effective surface protection strategies. In this work, FeSiBCCr1.3 amorphous soft magnetic alloy powders were fabricated by induction melting coupled with gas atomization, followed by atomic layer deposition (ALD) of an approximately 5.4 nm Al2O3 shell to construct a core-shell FeSiBCCr1.3@Al2O3 composite. Compared with the uncoated powder, FeSiB-CCr1.3@Al2O3 exhibited a low corrosion current density of 1.3 μA cm-2 in 3.5% (in mass) NaCl solution and maintained stable electromagnetic parameters after immersion in a simulated seawater corrosive medium for 30 d. Consequently, its microwave absorption performance remained essentially unchanged after corrosion exposure for 30 d, delivering an effective absorption bandwidth (EAB) of 8.2 GHz at a thickness of 1.9 mm and a minimum reflection loss (RLmin) of -47.5 dB at 4.8 mm with a filler loading of 30% (in vol). Furthermore, the FeSiBCCr1.3@Al2O3-based microwave absorbing coating retained excellent corrosion resistance and structural stability after 10 d of neutral salt spray testing, demonstrating its promise for long-term service in corrosive environments.

Key words: amorphous alloy, atomic layer deposition, broadband microwave absorption, corrosion resistance

CLC Number: