CsPbBr3@TiO2 Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst

doi:10.15541/jim20200358

Abstract

Abstract:

The inherent poor stability of CsPbBr₃ perovskite quantum dots (QDs) is the main impediment restricting their applications. In this work, a CsPbBr₃@TiO₂ core-shell structure nanocomposite with high water stability and efficient photocatalytic activity was fabricated through the hydrolysis of tetrabutyl titanate, followed by calcination. The as-prepared CsPbBr₃QDs have a size of ca. 8 nm, encapsulated by incompletely crystallized TiO₂protective layer with a thickness of ca. 20 nm. The photocatalytic performance of the CsPbBr₃@TiO₂ nanocomposite was investigated by degradation of Rhodamine B (RhB) in water under visible light irradiation. The result shows that the CsPbBr₃@TiO₂ nanocomposite exhibits much more enhanced photocatalytic activity than pure TiO₂ and CsPbBr₃ perovskite quantum dots. The photocurrent test results showed that the formation of the CsPbBr₃@TiO₂heterostructure can promote the separation of photogenerated carriers, which led to the improvement of photocatalytic performance of the composite material. More importantly, TiO₂ can act as a protective layer to separate CsPbBr₃ from water, which brings about the high water stability of the CsPbBr₃@TiO₂ nanocomposite. After photocatalytic degradation of pollutants, the recovered CsPbBr₃@TiO₂ nanocomposite retained its original morphology, luminescent and photocatalytic properties.

Key words: CsPbBr₃@TiO₂, nanocomposite, photocatalysis, charge separation

CLC Number:

O643

XIAO Xiang, GUO Shaoke, DING Cheng, ZHANG Zhijie, HUANG Hairui, XU Jiayue. CsPbBr₃@TiO₂ Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst[J]. Journal of Inorganic Materials, 2021, 36(5): 507-512.

Figures/Tables 6

Fig. 1 XRD patterns of CsPbBr3, TiO2 and CsPbBr3@TiO2

Fig. 2 TEM images of CsPbBr3 (a) and CsPbBr3@TiO2 (b), and (c) HRTEM image of CsPbBr3@TiO2

Fig. 3 FT-IR spectra of CsPbBr3, TiO2 and CsPbBr3@TiO2

Fig. 4 Survey XPS spectrum of CsPbBr3@TiO2 (a), and high resolution XPS spectra of Ti2p (b) and O1s (c)

Fig. 5 (a) Comparison of photocatalytic activities of CsPbBr3, TiO2 and CsPbBr3@TiO2 for degradation of Rhodamine B under visible light irradiation; (b) TEM image of recycled CsPbBr3@TiO2 after the degradation experiment; (c) Comparison of PL spectra of CsPbBr3@TiO2 before and after the degradation experiment; (d) Cycle runs of the photocatalytic degradation of RhB over CsPbBr3@TiO2

Fig. 6 (a) Photocurrent responses of CsPbBr3, TiO2 and CsPbBr3@TiO2, and (b) Photocatalytic mechanism of CsPbBr3@TiO2 composite

References 28

[1]	ZHOU H, CHEN Q, LI G, et al. Interface engineering of highly efficient perovskite solar cells. Science, 2014,345(6196):542-546. DOI URL PMID
[2]	LÜ W Z, LI L, XU M C, et al. Improving the stability of metal halide perovskite quantum dots by encapsulation. Advanced Materials, 2019,31(28):1900682.
[3]	LI X M, WU Y, ZHANG S L, et al. CsPbX₃ quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes. Advanced Functional Materials, 2016,26(15):2435-2445.
[4]	LIUY , LI F S, LI Q Q, et al. Emissions at perovskite quantum dot/film interface with halide anion exchange. ACS Photonics, 2018,5(11):4504-4512.
[5]	PARK S, CHANG W J, LEE C W, et al. Photocatalytic gydrogen generation from hydriodic acid using methylammonium lead iodide in dynamic equilibrium with aqueous solution. Nature Energy, 2016,2(1):16185.
[6]	HA S T, SU R, XING J, et al. Metal halide perovskite nanomaterials: synthesis and applications. Chemical Science, 2017,8(4):2522-2536. URL PMID
[7]	LI X, CAO F, YU D, et al. All inorganic halide perovskites nanosystem: synthesis, structural features, optical properties and optoelectronic applications. Small, 2017,13(9):1603996.
[8]	AKKERMAN Q A, RAINO G, KOVALENKO M V, et al. Genesis challenges and opportunities for colloidal lead halide perovskite nanocrystals. Nature Materials, 2018,17(5):394. URL PMID
[9]	BAI S, YUAN Z, GAO F, et al. Colloidal metal halide perovskite nanocrystals: synthesis characterization and applications. Journal of Materials Chemistry C, 2016,4(18):3898-3904.
[10]	ATOURKI L, VEGA E, MAN B, et al. Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI₃-_xBr_x(0≤x≤1) films. Applied Surface Science, 2016,371:112-117.
[11]	OTTO T, MULLER M, MUNDRA P, et al. Colloidal nanocrystals embedded in macrocrystals: robustness, photostability, and color purity. Nano Letters, 2012,12(10):5348-5354. URL PMID
[12]	HANSKE C, HILL E H, VILA-LIARTE D, et al. Solvent-assisted self-assembly of gold nanorods into hierarchically organized plasmonic mesostructures. ACS Applied Materials & Interfaces, 2019,11(12):11763-11771. DOI URL PMID
[13]	SHAO H, BAI X, PAN G, et al. Highly efficient and stable blue-emitting CsPbBr₃@SiO₂ nanospheres through low temperature synthesis for nanoprinting and wled. Nanotechnology, 2018,29(28):285706. URL PMID
[14]	LOIUDICE A, SARIS S, OVEISI E, et al. CsPbBr₃ QD/AlO_x inorganic nanocomposites with exceptional stability in water light and heat. Angewandte Chemie International Edition, 2017,56(53):10696-10701.
[15]	LIAO J F, XU Y F, WANG X D, et al. CsPbBr₃ nanocrystal/MO₂(M=Si, Ti, Sn) composites: insight into charge-carrier dynamics and photoelectrochemical applications. ACS Applied Materials & Interfaces, 2018,10(49):42301-42309. URL PMID
[16]	LIU S, HE M, DI X, et al. CsPbX₃ nanocrystals films coated on YAG: Ce³+ pig for warm white lighting source. Chemical Engineering Journal, 2017,330:823-830.
[17]	XIN Y, ZHAO H, ZHANG J, et al. Highly stable and luminescent perovskite-polymer composites from a convenient and universal strategy. ACS Applied Materials & Interfaces, 2018,10(5):4971-4980. URL PMID
[18]	ZHOU Q, BAI Z, LU W G, et al. In situ fabrication of halide perovskite nanocrystal-embedded polymer composite films with enhanced photoluminescence for display backlights. Advanced Materials, 2016,28(41):9163-9168. URL PMID
[19]	LI Z J, HOFMAN E, LI J, et al. Photoelectrochemically active and environmentally stable CsPbBr₃/TiO₂ core/shell nanocrystals. Advanced Functional Materials, 2018,28(1):1704288.
[20]	PROTESESCU L, YAKUNIN S, BODNARCHUK M I, et al. Nanocrystals of cesium lead halide perovskites (CsPbX₃, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Letters, 2015,15(6):3692-3696. URL PMID
[21]	FANG X X. Construction of highly ordered ZnO-TiO₂ nanotube arrays (ZnO/TNTs) heterostructure for photocatalytic application. ACS Applied Materials & Interfaces, 2012,4(12):7055-7063. DOI URL PMID
[22]	GUO W, LIN Z, WANG X, et al. Sonochemical synthesis of nanocrystalline TiO₂ by hydrolysis of titanium alkoxides. Microelectronic Engineering, 2003,66(1-4):95-101.
[23]	YANG J, WANG Y, LI W, et al. Amorphous TiO₂ shells: a vital elastic buffering layer on silicon nanoparticles for high-performance and safe lithium storage. Advanced Materials, 2017,29(48):1700523.
[24]	KIM H G, BORSE P H, CHOI W Y, et al. Photocatalytic nanodiodes for visible light photocatalysis. Angewandte Chemie International Edition, 2005,44(29):4585-4589. URL PMID
[25]	ZHOU D, ZHI C, QIAN Y, et al. In-situ construction of all-solid-state Z-scheme g-C₃N₄/TiO₂ nanotube arrays photocatalyst with enhanced visible-light-induced properties. Solar Energy Materials and Solar Cells, 2016,157:399-405.
[26]	ZHOU J, CHEN W, SUN C, et al. Oxidative polyoxometalates modified graphitic carbon nitride for visible-light CO₂ reduction. ACS Applied Materials & Interfaces, 2017,9(13):11689-11695. URL PMID
[27]	DONG Y, QIAO T, KIM D, et al. Precise control of quantum confinement in cesium lead halide perovskite quantum dots via thermodynamic equilibrium. Nano Letters, 2018,18(6):3716-3722. DOI URL PMID
[28]	LEE S, LEE K, KIM W D, et al. Thin amorphous TiO₂ shell on CdSe nanocrystal quantum dots enhances photocatalysis of hydrogen evolution from water. The Journal of Physical Chemistry C, 2014,118(41):23627-23634.

CsPbBr₃@TiO₂ Core-shell Structure Nanocomposite as Water Stable and Efficient Visible-light-driven Photocatalyst

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 6

References 28

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	MA Binbin, ZHONG Wanling, HAN Jian, CHEN Liangyu, SUN Jingjing, LEI Caixia. ZIF-8/TiO₂ Composite Mesocrystals: Preparation and Photocatalytic Activity [J]. Journal of Inorganic Materials, 2024, 39(8): 937-944.
[2]	CAO Qingqing, CHEN Xiangyu, WU Jianhao, WANG Xiaozhuo, WANG Yixuan, WANG Yuhan, LI Chunyan, RU Fei, LI Lan, CHEN Zhi. Visible-light Photodegradation of Tetracycline Hydrochloride on Self-sensitive Carbon-nitride Microspheres Enhanced by SiO₂ [J]. Journal of Inorganic Materials, 2024, 39(7): 787-792.
[3]	WANG Zhaoyang, QIN Peng, JIANG Yin, FENG Xiaobo, YANG Peizhi, HUANG Fuqiang. Sandwich Structured Ru@TiO₂ Composite for Efficient Photocatalytic Tetracycline Degradation [J]. Journal of Inorganic Materials, 2024, 39(4): 383-389.
[4]	LI Lei, CHENG Qunfeng. Recent Advances in the High Performance MXenes Nanocomposites [J]. Journal of Inorganic Materials, 2024, 39(2): 153-161.
[5]	WU Lin, HU Minglei, WANG Liping, HUANG Shaomeng, ZHOU Xiangyuan. Preparation of TiHAP@g-C₃N₄ Heterojunction and Photocatalytic Degradation of Methyl Orange [J]. Journal of Inorganic Materials, 2023, 38(5): 503-510.
[6]	LING Jie, ZHOU Anning, WANG Wenzhen, JIA Xinyu, MA Mengdan. Effect of Cu/Mg Ratio on CO₂ Adsorption Performance of Cu/Mg-MOF-74 [J]. Journal of Inorganic Materials, 2023, 38(12): 1379-1386.
[7]	SUN Chen, ZHAO Kunfeng, YI Zhiguo. Research Progress in Catalytic Total Oxidation of Methane [J]. Journal of Inorganic Materials, 2023, 38(11): 1245-1256.
[8]	MA Xinquan, LI Xibao, CHEN Zhi, FENG Zhijun, HUANG Juntong. BiOBr/ZnMoO₄ Step-scheme Heterojunction: Construction and Photocatalytic Degradation Properties [J]. Journal of Inorganic Materials, 2023, 38(1): 62-70.
[9]	CHEN Hanxiang, ZHOU Min, MO Zhao, YI Jianjian, LI Huaming, XU Hui. 0D/2D CoN/g-C₃N₄ Composites: Structure and Photocatalytic Performance for Hydrogen Production [J]. Journal of Inorganic Materials, 2022, 37(9): 1001-1008.
[10]	XUE Hongyun, WANG Congyu, MAHMOOD Asad, YU Jiajun, WANG Yan, XIE Xiaofeng, SUN Jing. Two-dimensional g-C₃N₄ Compositing with Ag-TiO₂ as Deactivation Resistant Photocatalyst for Degradation of Gaseous Acetaldehyde [J]. Journal of Inorganic Materials, 2022, 37(8): 865-872.
[11]	CHI Congcong, QU Panpan, REN Chaonan, XU Xin, BAI Feifei, ZHANG Danjie. Preparation of SiO₂@Ag@SiO₂@TiO₂ Core-shell Structure and Its Photocatalytic Degradation Property [J]. Journal of Inorganic Materials, 2022, 37(7): 750-756.
[12]	WANG Xiaojun, XU Wen, LIU Runlu, PAN Hui, ZHU Shenmin. Preparation and Properties of Ag@C₃N₄ Photocatalyst Supported by Hydrogel [J]. Journal of Inorganic Materials, 2022, 37(7): 731-740.
[13]	LIU Xuechen, ZENG Di, ZHOU Yuanyi, WANG Haipeng, ZHANG Ling, WANG Wenzhong. Selective Oxidation of Biomass over Modified Carbon Nitride Photocatalysts [J]. Journal of Inorganic Materials, 2022, 37(1): 38-44.
[14]	ZHANG Xian, ZHANG Ce, JIANG Wenjun, FENG Deqiang, YAO Wei. Synthesis, Electronic Structure and Visible Light Photocatalytic Performance of Quaternary BiMnVO₅ [J]. Journal of Inorganic Materials, 2022, 37(1): 58-64.
[15]	LIU Peng, WU Shimiao, WU Yunfeng, ZHANG Ning. Synthesis of Zn_0.4(CuGa)_0.3Ga₂S₄/CdS Photocatalyst for CO₂ Reduction [J]. Journal of Inorganic Materials, 2022, 37(1): 15-21.