[1] Sasaki K, Ishida H, Okada Y, et al. J. Am. Ceram. Soc., 1997, 80: 2959--2964. [2] Rodríguez, Rodríguez J L, De Aza M A, et al. J. Euro. Ceram. Soc., 2001, 21: 343--348. [3] Vogan J W, Hsu L, Stetson A R. Thin Solid Films, 1981, 84: 75--87. [4] Jansen F, Wei X H, Dorfman M R, et al. Surface and Coating Techn., 2002, 149: 57--61. [5] Gou Z, Chang J. J. Euro. Ceram. Soc., 2004, 24: 93--99. [6] Gou Z, Chang J, Zhai W. J. Euro. Ceram. Soc., (Available online; doi:10.1016). [7] Kokubo T, Kushitani H, Saka S, et al. J. Biomed. Mater. Res., 1990, 24: 721--734. [8] ISO/EN 10993-5. Biological evaluation of medical devices-Part 5 Tests for cytotoxicity, in vitro methods: 8.2 tests on extract. [9] Zhang C X, Sun J, Meng A Y. Chung Hua Kou Chiang Hsueh Tsa Chih, 1990, 25: 216--218. [10] Ringe J, Kaps C, Schmitt B, et al. Cell Tissue Res., 2002, 307: 321--327. [11] Koutsopoulos S. J. Biomed. Mater. Res., 2002, 62: 600--612. [12] Hench L L. Bioceramics. J. Am. Ceram. Soc., 1998, 7: 1705--1728. [13] Kokubo T. J. Non-Cryst. Solids, 1990, 120: 138--151. [14] Brenauer S, Kantro DL, Copeland L E. J. Am. Chem. Soc., 1958, 80: 761--765. [15] Dorozhkin S V, Epple M. Angew. Chem. Int. Ed., 2002, 41: 3130--3146. [16] Xynos I D, Edgar A J, Buttery E L K, et al. Biochem. Biophysi. Res. Commun., 2000, 276: 461--465. [17] Ian A. Silver, Deas J, Erecinska M. Biomaterials, 2001, 22: 175--185. [18] Patricia V, Marivalda M. Pereira, Alfredo M. Goes, et al. Biomaterials, 2004, 25: 2941--2948. [19] Yoshikawa T, Noshi T, Mitsuno H, et al. Mater. Sci. Eng, C., 2001, 17: 19--26. |