无机材料学报 ›› 2011, Vol. 26 ›› Issue (1): 61-67.DOI: 10.3724/SP.J.1077.2011.00061 CSTR: 32189.14.SP.J.1077.2011.00061

• 研究论文 • 上一篇    下一篇

电化学沉积法制备磷酸钙/明胶复合涂层的研究

王英波,鲁雄,冯波,屈树新,翁杰   

  1. 西南交通大学 材料先进技术教育部重点实验室,材料科学与工程学院,四川 成都610031
  • 收稿日期:2010-03-14 修回日期:2010-05-04 出版日期:2011-01-20 网络出版日期:2010-12-23
  • 作者简介:王英波(1981-), 女, 博士研究生. E-mail: ybwang20002575@163.com
  • 基金资助:

    国家自然科学基金(30700172); 国家科技支撑计划(2006BAI16B01); 高等学校博士学科点专项科研基金-20070613019

Calcium Phosphate/ Gelatin Composite Coatings on Titanium Surfaces by ElectrochemicalDepositon

WANG Ying-Bo1,LU Xiong1, FENG Bo1,QU Shu-Xin1, WENG Jie   

  1. Key Laboratoryof Advanced Technologies of Materials Ministry of Education, School ofMaterials Science and Engineering, Southwest Jiaotong University, Chengdu610031,China
  • Received:2010-03-14 Revised:2010-05-04 Published:2011-01-20 Online:2010-12-23
  • Supported by:

    (20070613019) National Nature Science Foundation of China (30700172); National KeyTechnology R&D Program (2006BAI16B01) Foundation for the Author of NationalExcellent Doctoral Dissertation of China (20070613019)

摘要: 采用脉冲电化学沉积法制备磷酸钙/明胶(CaP/Gelatin)复合涂层, 对其进行表征及性能测试, 旨在得到综合性能好的生物医用复合涂层. 研究中讨论了不同脉冲电位、明胶浓度、沉积温度、电解液pH值等对复合涂层性能的影响. 研究发现脉冲电位下涂层质量优于恒电位. XRD和FTIR分析表明复合涂层的成分为羟基磷灰石和明胶. SEM观察发现复合涂层是结构均匀的多孔网状或花瓣状微纳结构. 复合涂层形貌及成分随脉冲电位、明胶浓度等实验条件的变换而变化. 低电位利于复合涂层的结晶和沉积. 改变明胶在钙磷电解液中的浓度, 发现明胶浓度在0.1~1.0 g/lL范围内不影响涂层形貌, 但影响明胶在复合涂层中的含量. 沉积温度为50 ℃, 电解液pH值在明胶等电点以下保证了复合涂层具有较好的结晶性、均匀性. Alamar Blue检测表明复合涂层具有较好的生物相容性. 

关键词: 脉冲电沉积, 羟基磷灰石, Gelatin, 复合涂层, 生物相容性

Abstract: Bioactive calcium phosphate (Ca-P)coated titanium is the most promising bone replacement materials. Bioactive calciumphosphate (Ca-P) coated titanium has the advantages of both metal and ceramicsand has been considered as one of the most promising bone replacementmaterials. Gelatin is the denatured form of collagen and is expected to bebeneficial for hard tissue applications. The CaP/gelatin composite coatings couldcombine the bioactivity and osteoconductivity of CaP with the good characteristicsof gelatin. In the present study, The pulsed electrochemicaldeposition method was employed to deposit CaP/gelatin composite coatings ontitanium substrates. The main purpose of the study is to explore the optimumprocessing parameters of the composite coating. Electrolyte was made from themixture of the Ca-P and gelatin aqueous solution with different concentrations.SEM, XRD and FTIR were usedto characterize the composition and morphology of the coating. The coatings prepared underconstant voltage and pulse voltage electrodeposition were compared and it was foundthat the pulse voltage mode was more suitable for preparing CaP/gelatincoatings. The results indicated that Theoptimized experimental conditions were as follows,:pulse voltage range, of 0 to -1.3V, the Ca2+ concentrationof 5.0×10-4 mol/L; gelatin concentration of,0.5g/L, pH value, of 5.0; temperature of,50℃. Osteoblasts were cultured on the coatings to evaluate the biocompatibilityof coatings. Alamar Blue assay indicated that the composite coatings couldfavor the proliferation of the osteoblasts.

Key words: pulsedelectrochemical deposition, hydroxyapatite, gelatin, composite coating, biocompatibility

中图分类号: