高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

热压法制备0.3PZN-0.7PZT压电陶瓷研究

徐永利; 李尚平; 汪鹏; 田莳   

  1. 北京航空航天大学材料科学与工程系101教研室, 北京 100083
  • 收稿日期:1999-08-23 修回日期:1999-10-25 出版日期:2000-08-20 网络出版日期:2000-08-20

Hot-Pressed 0.3PZN-0.7PZT Piezoelectric Ceramics

XU Yong-Li; LI Shang-Ping; WANG Peng; TIAN Shi   

  1. Box101; No.37 Xue Yuan Road; Beijing 100083; China
  • Received:1999-08-23 Revised:1999-10-25 Published:2000-08-20 Online:2000-08-20

PDF (PC)

1280

被引次数

11

摘要： 研究了热压法制备０．３ＰＺＮ－０．７ＰＺＴ系压电陶瓷过程中，铅含量以及热压和退火工艺对材料性能的影响．实验结果表明，适当降低铅含量、提高退火温度和退火时间可得到性能优良的压电陶瓷．制得的压电陶瓷密度接近理论密度，电性能指标为： ｄ３３＝７１５ ｐＣ／Ｎ， Ｋｐ＝０．６５， ｔｇδ＝２．９％， εｒ＝３４５７， Ｑｍ＝５０．１．

关键词: 热压烧结, 压电陶瓷, PZN-PZT

Abstract: The factors that have influence on structure and electrical properties of hot pressed
0.3PZN-0.7PZT piezoelectric ceramics，such as Pb content，pressure，annealing temperature and time，were investigated. The results show
that the factors of Pb content, annealing temperature and annealing time have big influence on the properties of hot-pressed 0.3PZN-0.7PZT
piezoelectric ceramics. With Pb content of 98.5%, annealing temperature of 1250℃ and annealing time of 7 hours, the piezoelectric
properties, d33=715pC/N，Kp=0.65，tgδ=2.9%，εr=3457，Qm=50.1. High-density ceramics (99.8% of theoretical value) can be obtained with the hot pressing
and annealing method.

Key words: hot-pressing, piezoelectric ceramics, PZN-PZT

中图分类号: