无机材料学报 ›› 2020, Vol. 35 ›› Issue (9): 999-1004.DOI: 10.15541/jim20190500

所属专题: 环境材料论文精选(2020) 【虚拟专辑】化学反应催化剂(2020~2021)

• 研究论文 • 上一篇    下一篇

多级孔Co/Al-SiO2催化剂制备及其费-托合成催化性能

王举汉(),文雄,刘成超,张煜华,赵燕熹,李金林()   

  1. 中南民族大学 催化转化与能源材料化学教育部重点实验室, 催化材料科学湖北省重点实验室, 武汉430074
  • 收稿日期:2019-09-29 修回日期:2019-12-17 出版日期:2020-09-20 网络出版日期:2020-03-03
  • 作者简介:王举汉(1994-), 男, 硕士研究生. E-mail: 834767117@qq.com
    WANG Juhan(1994-), Male, Master candidate. E-mail:834767117@qq.com
  • 基金资助:
    国家自然科学基金(21972170);国家自然科学基金(21902187);湖北省自然科学基金(2018CFB365)

Preparation and Fischer-Tropsch Synthesis Performance of Hierarchical Co/Al-SiO2 Catalyst

WANG Juhan(),WEN Xiong,LIU Chengchao,ZHANG Yuhua,ZHAO Yanxi,LI Jinlin()   

  1. Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education & Hubei Key Laboratory of Catalysis and Materials Science, South-Central University for Nationalities, Wuhan 430074, China
  • Received:2019-09-29 Revised:2019-12-17 Published:2020-09-20 Online:2020-03-03
  • Supported by:
    National Natural Science Foundation of China(21972170);National Natural Science Foundation of China(21902187);Natural Science Foundation of Hubei Province of China(2018CFB365)

摘要:

多级孔硅铝材料因优异的性能而成为金属催化剂的重要载体。研究采用水热法以硝酸铝为铝源、正硅酸乙酯(TEOS)为硅源合成了Al掺杂SiO2(Al-SiO2)的多级孔材料, 然后采用等体积浸渍法负载钴, 制备了具有多级孔结构的 Co/Al-SiO2催化剂。对Al-SiO2材料的表征结果表明: 以四丙基氢氧化铵(TPAOH)为结构导向剂, 经80 ℃水热处理可以合成多级孔Al-SiO2, 呈尺寸在30~40 nm范围的 “蠕虫状”大孔分布形态。将催化剂用于费-托合成反应, 与商业SiO2负载的钴催化剂相比, Co/Al-SiO2的CO转化率提高近一倍, CH4选择性降低19.3wt%, C2-C4选择性降低13.3wt%, 汽油段产物(C5-C12)选择性达到53.3wt%。

关键词: 水热法, 多级孔材料, Al-SiO2, 钴催化剂, 费-托合成

Abstract:

Hierarchically porous silica-aluminum is an important support material for metal-catalysts, because of its excellent properties. Herein, an efficient hydrothermal approach for the production of hierarchical aluminum- doped silica (Al-SiO2) architectures was reported by employing aluminum nitrate as an aluminium source and TEOS as silicon source. Effects of the structure-oriented agent on the structure of Al-SiO2 were investigated. Structural features of Al-SiO2 were characterized by XRD, SEM and N2-physisorption. The results showed that hierarchical Al-SiO2 with "worm-like" porous of 30-40 nm can be synthesized by using TPAOH as the structure-oriented agent and hydrothermal treatment at 80 ℃. The cobalt catalysts were prepared by the wetness impregnation method. Compared with commercial SiO2 supported cobalt catalysts, the Fischer-Tropsch synthesis performance of the catalyst Co/Al-SiO2 is significantly enhanced, i.e., CO conversion nearly doubled, CH4 selectivity reduced by 19.3wt%, C2-C4 selectivity reduced by 13.3wt%, and the selectivity of gasoline products (C5-C12) reached 53.3wt%.

Key words: hydrothermal method, hierarchical porous materials, Al-SiO2, Cobalt catalyst, Fischer-Tropsch synthesis

中图分类号: