Preparation and Electrochemical Properties of Tin-copper Nanocomposite Oxides Material

doi:10.3724/SP.J.1077.2010.00729

Abstract

Abstract:

Nanocomposite oxides materials (SnO₂-CuO) as anode materials for lithium-ion batteries were synthesized via precipitation method. The crystalline structure and the electrochemical performance of as-synthesized samples were investigated. The results show that the nanocomposite oxides materials are SnO₂-CuO nanocomposites with diameter of about 90nm. The SnO2-CuO nanocomposites exhibit excellent electrochemical performance. After charge-discharged from 30 times to 50 times, the discharge capacity decreases from 254.4 mAh/g to 241.1 mAh/g, and the capacity retention is about 95%.

Key words: SnO₂-CuO composite oxides, precipitation method, anode material

CLC Number:

O612

LIU Bin, HU Wen-Sheng, SONG Bin, JIA Dian-Zeng. Preparation and Electrochemical Properties of Tin-copper Nanocomposite Oxides Material[J]. Journal of Inorganic Materials, 2010, 25(7): 729-732.

References

[1]Aishui Yu, Roger Frech. Mesoporous tin oxides as lithium intercalation anode materials. J. Power Sources, 2002, 104(1): 97-100.
[2]Lee Jim Yang, Zhang Ruifen, Liu Zhaolin. Dispersion of Sn and SnO on carbon anodes. J Power Sources, 2001, 96(2): 277-279.
[3]Mohamedi M, Lee S J, Takahashi D, et al. Amorphous tin oxide films: preparation and characterization as an anode active material for lithium ion batteries. Electrochimica Acta, 2001, 46(8): 1161-1168.
[4]Belliard F, Irvine J S. Electrochemical performance of ball-milled ZnO-SnO2 systems as anodes in lithiumion battery. J. Power Sources, 2001, 97-98: 219-222.
[5]Belliard F, Connor P A, Irvine J S. Novel tin oxide-based anodes for Li-ion batteries. Solid State Ionics, 2000, 135(1-4): 163-167.
[6]Song K S, Kang Y. Preparation of high surface area tin oxide powders by a homogeneous precipitation method. Mater. Lett., 2000, 42(5): 283-289.
[7]Yuan Zhengyong, Huang Feng, Sun Jutang, et al. Synthesis and characterization of amorphous nanosized MnSnO3 as a high capacity anode material for lithium ion battery. Journal of Materials Science Letters, 2003, 22(2): 143-144.
[8]Wu XingLan, Kim seung-Bin. Synthesis and electrode properties of a-Fe₂O₃from iron phthalocyanine. Electrochemical and Solid-state Letters, 1999, 2(4): 184-186.
[9]Nam S C, Yoon Y S, ChoW I, et al. Enhancement of thin film tin oxide negative electrodes for lithium batteries. Electrochemistry Communications, 2001, 3(1): 6-10.
[10]Poizot P, Laruelle S, Grugeon S. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries. Nature, 2000, 407: 496-499.
[11]Li H, Huang X, Chen L. Direct imaging of the passivating film and micro-structure of nanometer-scale SnO anodes in lithium rechargeable batteries. Electrochemical and Solid-State Letters, 1998, 1(6): 241-243.

[1]	LIU Yan, QIN Xianpeng, GAN Lin, ZHOU Guohong, ZHANG Tianjin, WANG Shiwei, CHEN Hetuo. Preparation of Sub-micron Spherical Y₂O₃ Particles and Transparent Ceramics [J]. Journal of Inorganic Materials, 2024, 39(6): 691-696.
[2]	HU Mengfei, HUANG Liping, LI He, ZHANG Guojun, WU Houzheng. Research Progress on Hard Carbon Anode for Li/Na-ion Batteries [J]. Journal of Inorganic Materials, 2024, 39(1): 32-44.
[3]	WANG Yutong, ZHANG Feifan, XU Naicai, WANG Chunxia, CUI Lishan, HUANG Guoyong. Research Progress of LiTi₂(PO₄)₃ Anode for Aqueous Lithium-ion Batteries [J]. Journal of Inorganic Materials, 2022, 37(5): 481-492.
[4]	WANG Jing, XU Shoudong, LU Zhonghua, ZHAO Zhuangzhuang, CHEN Liang, ZHANG Ding, GUO Chunli. Hollow-structured CoSe₂/C Anode Materials: Preparation and Sodium Storage Properties for Sodium-ion Batteries [J]. Journal of Inorganic Materials, 2022, 37(12): 1344-1350.
[5]	LI Kunru, HU Xinghui, ZHANG Zhengfu, GUO Yuzhong, HUANG Ruian. Three-dimensional Porous Biogenic Si/C Composite for High Performance Lithium-ion Battery Anode Derived from Equisetum Fluviatile [J]. Journal of Inorganic Materials, 2021, 36(9): 929-935.
[6]	ZHAN Jing,XU Changfan,LONG Yiyu,LI Qihou. Bi₂Mn₄O₁₀: Preparation by Polyacrylamide Gel Method and Electrochemical Performance [J]. Journal of Inorganic Materials, 2020, 35(7): 827-833.
[7]	XIA Tian, MENG Xie, LUO Ting, ZHAN Zhongliang. La ³⁺-substituted Sr₂Fe_1.5Ni_0.1Mo_0.4O_6-_δ as Anodes for Solid Oxide Fuel Cells [J]. Journal of Inorganic Materials, 2020, 35(5): 617-622.
[8]	ZHU Zeyang,WEI Jishi,HUANG Jianhang,DONG Xiangyang,ZHANG Peng,XIONG Huanming. Preparation of ZnO Nanorods with Lattice Vacancies and Their Application in Ni-Zn Battery [J]. Journal of Inorganic Materials, 2020, 35(4): 423-430.
[9]	ZHENG Shiyou, DONG Fei, PANG Yuepeng, HAN Pan, YANG Junhe. Research Progress on Nanostructured Metal Oxides as Anode Materials for Li-ion Battery [J]. Journal of Inorganic Materials, 2020, 35(12): 1295-1306.
[10]	GUO Si-Lin, KANG Shuai, LU Wen-Qiang. Ge Nanoparticles in MXene Sheets: One-step Synthesis and Highly Improved Electrochemical Property in Lithium-ion Batteries [J]. Journal of Inorganic Materials, 2020, 35(1): 105-111.
[11]	LI Xiao-Ying, LIU Qiang, HU Ze-Wang, JIANG Nan, SHI Yun, LI Jiang. Influence of Ammonium Hydrogen Carbonate to Metal Ions Molar Ratio on Co-precipitated Nanopowders for TGG Transparent Ceramics [J]. Journal of Inorganic Materials, 2019, 34(7): 791-797.
[12]	Yi TAN, Kai WANG. Silicon-based Anode Materials Applied in High Specific Energy Lithium-ion Batteries: a Review [J]. Journal of Inorganic Materials, 2019, 34(4): 349-357.
[13]	Xiao-Jing FENG, Gong-Kai WANG, Xiao-Ran WANG, Jun HE, Xin WANG, Hui-Fen PENG. Electrochemical Property of Cr ³⁺ Doped LiSn₂(PO₄)₃ Anode Material [J]. Journal of Inorganic Materials, 2019, 34(4): 358-364.
[14]	HU Xi, LIU Hong-Bo, XIA Xiao-Hong, GU Zhi-Qiang. Polyaniline-carbon Pillared Graphene Composite: Preparation and Electrochemical Performance [J]. Journal of Inorganic Materials, 2019, 34(2): 145-151.
[15]	TAN Yi, XUE Bing. Research Progress on Lithium Titanate as Anode Material in Lithium-ion Battery [J]. Journal of Inorganic Materials, 2018, 33(5): 475-482.