无机材料学报 ›› 2026, Vol. 41 ›› Issue (11): 1615-1622.DOI: 10.15541/jim20260090
收稿日期:2026-03-03
修回日期:2026-05-11
出版日期:2026-06-08
网络出版日期:2026-06-08
通讯作者:
肖永厚, 教授. E-mail: xiaoyh@sspu.edu.cn作者简介:王 浩(2000-), 男, 硕士研究生. E-mail: 15041522293@163.com
基金资助:
WANG Hao1,2(
), LI Guanglan3, ZHANG Yajing1, XIAO Yonghou2,4(
)
Received:2026-03-03
Revised:2026-05-11
Published:2026-06-08
Online:2026-06-08
Contact:
XIAO Yonghou, professor. E-mail: xiaoyh@sspu.edu.cnAbout author:WANG Hao (2000-), male, Master candidate. E-mail: 15041522293@163.com
Supported by:摘要:
将高能耗的析氧反应替换为热力学更有利的硫氧化反应(Sulfide Oxidation Reaction, SOR), 是实现节能制氢并协同回收高附加值硫产品的有效策略。但阳极表面不可控的固态硫沉积易钝化活性位点和阻滞反应动力学, 严重影响催化剂稳定性。本研究采用两步水热法在泡沫镍(NF)上制备了具有独特“无定形-微晶”异质结构的钴钼共掺杂镍基硫化物电催化剂(CoMoNiSx/NF)。得益于原位构建的CoMoO4/硫化物亲水界面与丰富的S22-缺陷位点, 该催化剂展现出优异的SOR性能, 仅需0.28 V (vs. RHE)的超低过电位即可驱动100 mA·cm-2的电流密度, 并稳定运行超过300 h。在碱性环境下, SOR过程中原位生成的多硫化物可溶解于电解液体系, 显著抑制了固态硫在电极表面的沉积, 避免了电极钝化。此外, 组装的SOR||HER双电极电解槽仅需约1.0 V的槽压即可达到100 mA·cm-2, 制氢法拉第效率高达98.6%。
中图分类号:
王浩, 李光兰, 张雅静, 肖永厚. 钴钼共掺杂构筑CoMoNiSx/NF用于高效硫氧化反应[J]. 无机材料学报, 2026, 41(11): 1615-1622.
WANG Hao, LI Guanglan, ZHANG Yajing, XIAO Yonghou. Construction of CoMoNiSx/NF via Co-Mo Co-doping for Efficient Sulfur Oxidation Reaction[J]. Journal of Inorganic Materials, 2026, 41(11): 1615-1622.
图2 CoNiSx/NF的(a~c) SEM和(d) TEM照片; MoNiSx/NF的(e~g) SEM和(h) TEM照片; CoMoNiSx/NF的(i~k) SEM、(l) TEM、(m) HRTEM照片和(n) EDS元素分布图
Fig. 2 (a-c) SEM and (d) TEM images of CoNiSx/NF; (e-g) SEM and (h) TEM images of MoNiSx/NF; (i-k) SEM, (l) TEM, (m) HRTEM images and (n) EDS elemental mappings of CoMoNiSx/NF
图3 CoMoNiSx/NF及对比样品的物相结构与表面化学态分析
Fig. 3 Phase structures and surface chemical states of CoMoNiSx/NF and its counterparts (a) XRD patterns; (b) Co2p, (c) Mo3d, (d) Ni2p, (e) S2p, and (f) O1s XPS spectra
图4 CoMoNiSx/NF的SOR电化学性能评价
Fig. 4 Electrochemical SOR performance of CoMoNiSx/NF (a) Comparison of LSV curves for CoMoNiSx/NF in electrolyte with and without Na2S (SOR vs. OER); (b) SOR-LSV curves of CoMoNiSx/NF, CoNiSx/NF, and MoNiSx/NF; (c) Current density comparison of different catalysts at 0.3, 0.4, 0.5, and 0.6 V; (d) Corresponding Tafel slope plots; (e) Double-layer capacitance (Cdl) fitting curves; (f) Nyquist plots with inset showing equivalent circuit; (g) Comparison of SOR potentials at 100 mA·cm-2 between CoMoNiSx/NF and previously reported catalysts[1,7,18,24-34]; (h) Chronopotentiometry stability test at a constant current density of 30 mA·cm-2
图5 CoMoNiSx/NF双功能电解池的长期稳定性及SOR产物转化机制
Fig. 5 Long-term stability and SOR product conversion mechanism of CoMoNiSx/NF-based bifunctional electrolytic cell (a) Galvanostatic stability test of the CoMoNiSx/NF-based SOR||HER dual-function electrolyzer at 100 mA·cm-2; (b) Comparison of LSV performance before and after the stability test; (c) Faradaic efficiency and hydrogen production rate of the electrolyzer at 100 mA·cm-2; (d) Time-dependent UV-Vis absorption spectra of the electrolyte (diluted 250-fold) during the stability test; (e) XRD pattern of the precipitated product from the post-reaction electrolyte compared with the standard patterns of elemental sulfur
图S1 CoMoNiSx/NF的HER性能
Fig. S1 HER performance of CoMoNiSx/NF (a) LSV curves of CoMoNiSx/NF, CoNiSx/NF, and MoNiSx/NF; (b) Tafel slope plots; (c) Nyquist curves (inset: equivalent circuit diagram); (d) Fitting curves of double-layer capacitance
图S2 CoMoNiSx/NF在300 h恒电流稳定性测试前后的XPS对比谱图
Fig. S2 Comparative XPS spectra of CoMoNiSx/NF before and after 300 h of galvanostatic stability test (a) Survey spectra; High-resolution spectra of (b) Mo3d, (c) Co2p, (d) Ni2p, (e) S2p, and (f) O1s
图S4 CoMoNiSx/NF双功能耦合电解槽在100 mA·cm-2电流密度下运行24 h的电解液变化照片
Fig. S4 Photographs showing the electrolyte changes of the CoMoNiSx/NF bifunctional coupled electrolyzer operating at a current density of 100 mA·cm-2 for 24 h
| [1] | FENG W, CHENG M, DU R, et al. Gram-scale synthesized two-dimensional VSe2 and SnSe2 for ultrahigh electrocatalytic sulfion recycling. Advanced Materials Interfaces, 2022, 9(13):2200060. |
| [2] | XIAO X, YANG L, SUN W, et al. Electrocatalytic water splitting: from harsh and mild conditions to natural seawater. Small, 2022, 18(11):2105830. |
| [3] | MEGIA P J, VIZCAINO A J, CALLES J A, et al. Hydrogen production technologies: from fossil fuels toward renewable sources. A mini review. Energy & Fuels, 2021, 35(20):16403. |
| [4] | WEN Q, ZHAO Y, LIU Y, et al. Ultrahigh-current-density and long-term-durability electrocatalysts for water splitting. Small, 2022, 18(4):2104513. |
| [5] | LI J, MA Y, MU X, et al. Recent advances and perspectives on coupled water electrolysis for energy-saving hydrogen production. Advanced Science, 2025, 12(7):2411964. |
| [6] | ZHANG L, LI M, SUN C, et al. A hydrazine-water galvanic cell-inspired self-powered high-rate hydrogen production via overall hydrazine electrosplitting. Advanced Functional Materials, 2025, 35(19):2420163. |
| [7] | ZHANG L, WANG Z, QIU J. Energy-saving hydrogen production by seawater electrolysis coupling sulfion degradation. Advanced Materials, 2022, 34(16):2109321. |
| [8] | STARTSEV A, KRUGLYAKOVA O, CHESALOV Y A, et al. Low temperature catalytic decomposition of hydrogen sulfide into hydrogen and diatomic gaseous sulfur. Topics in Catalysis, 2013, 56(11):969. |
| [9] | ZHANG S, HUANG M, WANG Y, et al. Achieving a quasi-solid-state conversion of polysulfides via building high efficiency heterostructure for room temperature Na-S batteries. Advanced Energy Materials, 2024, 14(14):2303925. |
| [10] | YU Z, DENG Z, LI Y, et al. Advances in electrocatalyst design and mechanism for sulfide oxidation reaction in hydrogen sulfide splitting. Advanced Functional Materials, 2024, 34(39):2403435. |
| [11] | KUNDU J, ANNE B R, CHO J, et al. Heterostructure engineering in metal sulfides for electrochemical CO2 reduction: advancing performance and stability. Small, 2025, 21(38):e05185. |
| [12] | WEI C D, XUE H T, YIN R J, et al. First-principles screening of transition-metal doped FeS2 as sulfur cathode host for sulfur redox chemistry. ChemCatChem, 2023, 15(17):e202300569. |
| [13] | CHU X, LIAO Y, WANG L, et al. Engineering sulfur vacancies for boosting electrocatalytic reactions. Chinese Chemical Letters, 2023, 34(9):108285. |
| [14] | ZHANG Y, ZHANG Y, ZHANG H, et al. Defect engineering in metal sulfides for energy conversion and storage. Coordination Chemistry Reviews, 2021, 448: 214147. |
| [15] | XIAO Y, SHEN Y, SU D, et al. Engineering Cu1.96S/Co9S8 with sulfur vacancy and heterostructure as an efficient bifunctional electrocatalyst for water splitting. Journal of Materials Science & Technology, 2023, 154: 1. |
| [16] | 韩啸, 张成锟, 吴华龙, 等. 锂离子电池的工作原理与关键材料. 金属功能材料, 2021, 28(2):37. |
| [17] | SETIA Y, PALTASINGH S N, NAYAK S K, et al. Porous Mo modified Ni3N/Ni3S2 hetero interfacing for facile sulfur oxidation mediated green H2 production. Advanced Sustainable Systems, 2025, 9(9):e00407. |
| [18] | HUO J, JIN L, CHEN C, et al. Improving the sulfurophobicity of the NiS-doping CoS electrocatalyst boosts the low-energy-consumption sulfide oxidation reaction process. ACS Applied Materials & Interfaces, 2023, 15(37):43976. |
| [19] | PEI Y, LI D, QIU C, et al. High-entropy sulfide catalyst boosts energy-saving electrochemical sulfion upgrading to thiosulfate coupled with hydrogen production. Angewandte Chemie International Edition, 2024, 63(48):e202411977. |
| [20] | LI S, LI Z, MA R, et al. A glass-ceramic with accelerated surface reconstruction toward the efficient oxygen evolution reaction. Angewandte Chemie International Edition, 2021, 133(7):3817. |
| [21] | KANG J, LI F, XU Z, et al. How amorphous nanomaterials enhanced electrocatalytic, SERS, and mechanical properties. JACS Au, 2023, 3(10):2660. |
| [22] | WANG L, WANG P, XUE X, et al. Interface engineering of three-phase nickel-cobalt sulfide/nickel phosphide/iron phosphide heterostructure for enhanced water splitting and urea electrolysis. Journal of Colloid and Interface Science, 2024, 665: 88. |
| [23] | LIU G, ZENG Q, SUI X, et al. Modulating d-band electronic structures of molybdenum disulfide via p/n doping to boost polysulfide conversion in lithium-sulfur batteries. Small, 2023, 19(37):2301085. |
| [24] | TANG X, ZHANG Y, WU F, et al. Mo-doped cobaltous sulfide nanosheet arrays as efficient catalysts for the sulfion oxidation reaction promoting hydrogen production with ultra-low electric energy consumption. Inorganic Chemistry Frontiers, 2023, 10(22):6728. |
| [25] | GAO T, TANG X, LI X, et al. Surface reconstructing hierarchical structures as robust sulfion oxidation catalysts to produce hydrogen with ultralow energy consumption. Inorganic Chemistry Frontiers, 2023, 10(5):1447. |
| [26] | XIAO Z, LU C, WANG J, et al. Bifunctional Co3S4 nanowires for robust sulfion oxidation and hydrogen generation with low power consumption. Advanced Functional Materials, 2023, 33(7):2212183. |
| [27] | REN J T, CHEN L, WANG H, et al. Self-powered hydrogen production with improved energy efficiency via polysulfides redox. ACS Nano, 2023, 17(24):25707. |
| [28] | TENG X, SHI K, CHEN L, et al. Coupling electrochemical sulfion oxidation with CO2 reduction over highly dispersed p-Bi nanosheets and CO2-assisted sulfur extraction. Angewandte Chemie International Edition, 2024, 136(7):e202318585. |
| [29] | PEI Y, CHENG J, ZHONG H, et al. Sulfide-oxidation-assisted electrochemical water splitting for H2 production on a bifunctional Cu2S/nickel foam catalyst. Green Chemistry, 2021, 23(18):6975. |
| [30] | DUAN C, TANG C, YU S, et al. Efficient electrocatalytic desulfuration and synchronous hydrogen evolution from H2S via anti-sulfuretted NiSe nanowire array catalyst. Applied Catalysis B: Environmental, 2023, 324: 122255. |
| [31] | ZHANG M, GUAN J, TU Y, et al. Highly efficient H2 production from H2S via a robust graphene-encapsulated metal catalyst. Energy & Environmental Science, 2020, 13(1):119. |
| [32] | LIU F, CAI X, TANG Y, et al. Nano-Ni-induced electronic modulation of MoS2 nanosheets enables energy-saving H2 production and sulfide degradation. Energy & Environmental Materials, 2024, 7(3):e12644. |
| [33] | LI Y, DUAN Y, ZHANG K, et al. Efficient anodic chemical conversion to boost hydrogen evolution with low energy consumption over cobalt-doped nickel sulfide electrocatalyst. Chemical Engineering Journal, 2022, 433: 134472. |
| [34] | YI L, JI Y, SHAO P, et al. Scalable synthesis of tungsten disulfide nanosheets for alkali-acid electrocatalytic sulfion recycling and H2 generation. Angewandte Chemie International Edition, 2021, 60(39):21550. |
| [35] | ARAS F, BURKHARDT U, ORMECI A, et al. Chemical behavior of Mo2TMB2 (TM=Fe, Co, Ni) upon the oxygen evolution reaction (OER). ACS Materials Au, 2025, 5(4):718. |
| [36] | LI Y, HAN J, BAO W, et al. Self-derivation and reconstruction of silver nanoparticle reinforced cobalt-nickel bimetallic hydroxides through interface engineering for overall water splitting. Journal of Energy Chemistry, 2024, 90: 590. |
| [37] | BARCHASZ C L, MOLTON F, DUBOC C, et al. Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification. Analytical Chemistry, 2012, 84(9):3973. |
| [38] | LEMOS B R, TEIXEIRA I F, DE MESQUITA J P, et al. Use of modified activated carbon for the oxidation of aqueous sulfide. Carbon, 2012, 50(3):1386. |
| [39] | LINKOUS C A, HUANG C, FOWLER J R. UV photochemical oxidation of aqueous sodium sulfide to produce hydrogen and sulfur. Journal of Photochemistry and Photobiology A: Chemistry, 2004, 168(3):153. |
| [1] | 任先培, 李超, 胡启威, 向晖, 彭跃红. 金属/过渡金属化合物莫特-肖特基析氢催化剂研究进展[J]. 无机材料学报, 2026, 41(2): 137-149. |
| [2] | 孙强强, 姜美娜, 魏宇航, 王丹, 周子雯, 李春, 曹宝月. 多孔片层钴钒氢氧化物/镍铜复合催化剂的构筑及其高效产氢性能[J]. 无机材料学报, 2026, 41(10): 1396-1406. |
| [3] | 任先培, 李超, 凌芳, 胡启威, 于俊玲, 向晖, 彭跃红. 炭黑表面CoMoSSe异质结构合金的制备及其高效析氢研究[J]. 无机材料学报, 2025, 40(11): 1293-1299. |
| [4] | 景欣欣, 陈必清, 翟佳鑫, 袁美玲. Ni-Co-B-RE(Sm、Dy、Tb)复合电极: 化学沉积法制备及电催化析氢性能研究[J]. 无机材料学报, 2024, 39(5): 467-476. |
| [5] | 孙强强, 陈子璇, 杨子玥, 王毅梦, 曹宝月. 金属镍铜负载钒氧化物的高效电解产氢性能[J]. 无机材料学报, 2023, 38(6): 647-655. |
| [6] | 朱云娜, 陈必清, 程天舒, 杜婵, 张士民, 赵静. 非晶Nd-Ni-B/NF稀土复合电极材料的制备及其析氢性能[J]. 无机材料学报, 2021, 36(6): 637-644. |
| [7] | 李兆, 孙强强, 陈索倩, 周春生, 曹静, 王永锋, 王亚楠. 水热合成镍铜复合磷化物及其电催化析氢与肼氧化性能[J]. 无机材料学报, 2020, 35(10): 1149-1156. |
| [8] | 苏琨, 张亚茹, 陆飞, 张君, 王熙. 铂修饰二氧化钛纳米片的制备及其光电催化析氢反应研究[J]. 无机材料学报, 2019, 34(11): 1200-1204. |
| [9] | 王辉, 俞有幸. KOH碱化处理对Fe3N纳米颗粒电催化制氢性能影响[J]. 无机材料学报, 2018, 33(6): 653-658. |
| 阅读次数 | ||||||
|
全文 |
|
|||||
|
摘要 |
|
|||||