无机材料学报

• 研究论文 • 上一篇    下一篇

定向碳纳米管阵列在石英玻璃基底上的模板化生长研究

张先锋; 曹安源; 孙群慧; 徐才录; 吴德海   

  1. 清华大学机械工程系 北京 100084
  • 收稿日期:2002-03-25 修回日期:2002-05-08 出版日期:2003-05-20 网络出版日期:2003-05-20

Patterned Growth of Well-aligned Carbon Nanotube Arrays on Quartz Substrates by Chemical Vapor Deposition

ZHANG Xian-Feng; CAO An-Yuan; SUN Qun-Hui; XU Cai-Lu; WU De-Hai   

  1. Department of Mechanical Engineering; Tsinghua University; Beijing 100084; China
  • Received:2002-03-25 Revised:2002-05-08 Published:2003-05-20 Online:2003-05-20

摘要: 分别以带有刻痕的石英玻璃和溅射过Au膜的石英玻璃为生长基底,通过催化裂解二茂铁和二甲苯混合物的方法,在基底上制备出了模板化的定向碳纳米管(CNT)阵列,扫描电镜(SEM)和透射电镜(TEM)观察表明:在这两种基底上生长的定向碳纳米管阵列的模板化程度都很高,其中的碳纳米管多为直径在20~50nm的多壁管(MWNT),且具有很好的定向性。本文还分析、对比了基底材料对定向碳纳米管生长的影响,初步探讨了定向碳纳米管模板化生长的形成机制。

关键词: 碳纳米管, 模板化生长, 化学气相沉积, 定向阵列

Abstract: Patterned and well-aligned carbon nanotube (CNT) arrays were synthesized by chemical vapor deposition on quartz glass with notches or sputtered Au film.
Ferrocene was used to produce Fe catalyst particles, and xylene was selected as the hydrocarbon source. Scanning electron microscopy (SEM) and transmission
electron microscopy (TEM) examinations show that the arrays are in ordered patterns, in which the CNTs are muti-walled CNTs in good alignment with diameter about 20~50 nm.
The influences of substrate materials on the aligned CNTs were analyzed, and the formation mechanism of patterned arrays was discussed. Patterned CNT arrays
have potential applications in many fields such as, flat panel displays, micro-electronic devices, nanocomposites, etc.

Key words: carbon nanotubes, patterned growth, chemical vapor deposition, aligned array

中图分类号: