Progress in the Research of Molybdenum Disilicide and Its Applications

Abstract

Abstract: MoSi₂ and MoSi₂-based composites have always been paid much attention as important materials for heating and high temperature structural
applications, because of its high melting point(2303K), excellent elevated temperature oxidation resistance and good electrical resistivity. In this
paper, new developments in recent years from international and domestic materials science circles were reviewed in detail, and some impressive
aspects about MoSi₂, including deformation mechanisms, oxidation mechanisms and composite strengthening and toughening, were also briefly
described and summarized. Finally, the present and potential applications of MoSi₂ materials were appraised and prospected, it was suggested that
MoSi₂ could be one of the most promising candidate materials for high-temperature structural applications in the 21-century.

Key words: molybdenum disilicide, heating element, composites, mechanical properties, high temperature structural applications, 妎xidation resistance

CLC Number:

TF125

JIANG Wan,ZHAO Shi-Ke,WANG Gang. Progress in the Research of Molybdenum Disilicide and Its Applications[J]. Journal of Inorganic Materials.

References

[1] Kanthal Super Handbook. Kanthal Furnace Products (Sweden), 1984.
[2] Vasudevan A K, Petrovic J. J. Mater. Sci. Eng., A, 1992, 155: 1--17.
[3] Meschter P J, Schwartz D S. JOM, 1989, 11: 52--55.
[4] Shobu K. J. Ceram. Soc. Japan, 1989, 97: 1311--1314.
[5] Jiang W. J. Japan lnst. Metals, 2000, 64: 1089--1093.
[6] Chou T C, Nieh T G. J. Mater. Res., 1993, 8: 214--226.
[7] Jiang W. J. Japan lnst. Metals, 1999, 63: 1229--1300.
[8] Narita T, et al. Proc. Inter. Symp. High Temp. Corro. Prote. 2000, Japan: Science Reviews, 2000. 541--544.
[9] Mizobuthi T. Riken News, 2000, 264: 15.
[10] Umakoshi Y, Sakagami T, hirano T, et al. Acta Metall. Mater., 1990, 38: 909--915.
[11] ByStoloff N S, et al. Critical Issues in the Development of High Temperature Structural Materials, US: Miner. Met. Mater. Soc., 1993. 279--290.
[12] Maloy S A, Mitchell T E, Heuer A H. Acta Metall. Mater., 1995, 43: 657--668.
[13] Ito K, Inui H, Shirai Y, et al. Phil. Mag. A, 1995, 72: 1075--1097.
[14] Ito K. Materia Japan, 1997, 36: 1102--1107.
[15] Sadnanda K, Jones H, Feng J. Ceram. Eng. Sci. Proc., 1991, 12: 1671--1678.
[16] Stoioff N S, et al. Critical Issues in the Development of High Temperature Structural Materials, US: Miner. Met. Mater. Soc., 1993. 291--302.
[17] Feng C R, Sadnanda K. High Temperature Intermetallic Alloys VI, US: Mater. Res. Soc. Symp. Proc., 1995. 1053.
[18] Kurokawa K. Bull. Japan Inst. Metals, 1993, 32: 668--675.
[19] Benesovsky F. Warmfest und Korrosionbestandige Sinterwerkstoffe, Vienna: Springer, 1956. 56--79.
[20] Westbrook J H, Wood D L. J. Nucl. Materials, 1964, 12: 208--215.
[21] Mckamey C G, Tortorelli P F, DeVan J H, et al. J. Mater. Res., 1992, 7: 2747--2755.
[22] Chou T C, Nieh T G. J. Mater. Res., 1993, 8: 214--226.
[23] Jiang W, Uchiyama T, Nagumo M. et al. J. Japan lnst. Metals, 1997, 61: 247--248.
[24] Meschter P J. Metall. Trans., 1992, 23A: 1763--1772.
[25] Maruyama T. Materia Japan, 1996, 35: 1108--1113.
[26] Jiang W, Uchiyama T. J. Japan lnst. Metals, 1999, 63: 1129--1130.
[27] Jiang W, Uchiyama T. J. Japan Soc. Powder and Powder Metall., 1999, 46: 1162--1166.
[28] Suzuki Y, Nihara K. Sci. Eng. Compos. Mater., 1997, 6: 85--94.
[29] Jiang W, Tsuji K, Uchiyama T, et al. J. Japan Soc. Powder and Powder Metall., 1997, 43: 444--449.
[30] Nathal M V, et al. Structural Intermetallics, US: Miner. Met. Mater. Soc., c. 1997. 949--958.
[31] Petrovic J J, Pena M I, Reimanis I E, et al. J. Am. Ceram. Soc., 1998, 81: 421--424.
[32] Petrovic J J, Vasudevan A K. Mater. Sci. Eng., 1999, A261: 1--5.
[33] 金燕苹，洪涛，郑灵仪，等. 材料研究学报，1994, 8: 183--187.
[34] 马勤，杨延清，康沫狂. 材料工程，1995, 6: 71--72.
[35] 胡冬昉，黄汉铨，黄建宇，等. 金属学报，1995, 31: 135--138.
[36] 柳林，秦勇. 金属学报，1996, 31: 423--427.
[37] 曾榕，郑长卿，李贺军，等. 复合材料学报，1997, 14: 37--40.
[38] 张来启，孙祖庆，张~~跃，等. 金属学报，1998, 34: 1205--1209.
[39] 李建林，江东亮，谭寿洪. 金属学报，1999, 35: 634--637.
[40] 富士时报(Fuji Electric Journal)，1997, 70: 15.