Preparation of Ordered Porous Ceramic Joint on C/SiC Composites and Its Joining Technique

doi:10.3724/SP.J.1077.2013.12556

Abstract

Abstract: Mono-dispersed silica spheres were prepared as template by st?ber method. Based on this template, the ordered nanoporous ceramic joints on the C/SiC composites were successfully fabricated for the first time by preceramic polymer techniques and the condition was optimized. Two different joining methods, directly soaking (DSM) and soaking after the first joining (SJM), were used for joining the ordered nanoporous ceramic joints of the C/SiC composites. The result shows that the bending strength of the joints by DSM and SJM is about 20.5 and 82.4 MPa, respectively, suggesting SJM more suitable for joining C/SiC composites.

Key words: C/SiC composites, joining, precursor conversion technique, template technique, ordered nanoporous ceramic joint

CLC Number:

TQ174

WANG Hao, ZHOU Qing-Jun, JIAN Ke, SHAO Chang-Wei, ZHU Yi-Hua. Preparation of Ordered Porous Ceramic Joint on C/SiC Composites and Its Joining Technique[J]. Journal of Inorganic Materials, 2013, 28(7): 763-768.

References

[1] Sanokawa Y, Ido Y, Sohda Y, et al. Application of continuous fiber reinforced silicon carbide matrix composites to a ceramic gas turbine model for automobile. Ceram. Eng. & Sc. Proc., 1997, 18(4): 221–228.

[2] Wulz H G, Trabandt U. Large integral hot CMC structures designed for future reusable launchers. AIAA-97-2485.

[3] Murata H, Shioda M, Nakamura T. Method and Apparatus for Manufacturing Ceramic-based Composite Member. United States, B28B13/00, US 6, 723, 381. 2004.

[4] Yamaguchi H, Nakamura T, Murata H. Method for Fabricating Ceramic Matrix Composite. United States, C04B 35/80, US 6, 723, 382. 2004.

[5] Schmidt S, Beyer S, Knabe H, et al. Advanced Ceramic Matrix Composites Materials for Current and Future Propulsion Technology Applications. IAC-03-S.3, Germany, 03 Sep, 2003.

[6] Velev O D, Jede T A, Lobo R F, et al. Porous silica via colloidal crystallization. Nature, 1997, 389: 447–448.

[7] Velev O D, Jede T A, Lobo R F, et al. Microstructured porous silica obtained via colloidal crystal templates. Chem. Mater., 1998, 10(11): 3597–3602.

[8] Stein A, Schroden R C. Colloidal crystal templating of three-dimensionally ordered macroporous solids: materials for photonics and beyond. Current Opinion in Solid State & Materials Science, 2001, 5(6): 553-564.

[9] Yan H, Blanford C F, Holland B T, et al. General synthesis of periodic macroporous solids by templated salt precipitation and chemical conversion. Chem. Mater., 2000, 12(4): 1134–1141.

[10] Yu J S, Yoon S B, Chai G S. Ordered uniform porous carbon by carbonization of sugars. Carbon, 2001, 39: 1421–1425.

[11] Bartlett P N, Birkin P R, Ghanem M A, et al. Electrochemical syntheses of highly ordered macroporous conducting polymers grown around self-assembled colloidal templates. J. Mater. Chem., 2001, 11(3): 849–853.

[12] Yi D K, Kim D Y. Novel approach to the fabrication of macroporous polymers and their use as a template for crystalline titania nanorings. Nano Lett., 2003, 3(2): 207–211.

[13] Beck J S, Vartuli J C, Roth W J. A new family of mesoporous molecular sieves prepared with liquid crystal templates. J. Am. Chem. Soc., 1992, 114(24): 10834-10843.

[14] Wang H, Zheng S Y, Li X D, et al. Preparation of three-dimensional ordered macroporous SiCN ceramic using sacrificing template method. Microporous and Mesoporous Mater., 2005, 80(1/2/3): 357-362.

[15] Chen C Y, Xiao S Q, Davis M E. Studies on ordered mesoporous materials III. Comparison of MCM-41 to mesoporous materials derived from kanemite. Microporous Mater., 1995, 4(1): 1-20.

[16] Yanagisawa T, Shimizu T, Kuroda K, et al. The preparation of alkyltrimethylammoniumkanemite complexes and their conversion tomicroporous materials. Bull. Chem. Soc. Jpn., 1990, 63(4): 988-992.

[17] Huo Q, Leon R, Petroff P M, et al. Mesostructure design with gemini surfactants: supercage formation in a 3-D hexagonal array. Science, 1995, 268(5215): 1324-1327.

[18] Sakamoto Y, Kaneda M, Teraski O, et al. Direct imaging of the pores and cages of three-dimensional mesoporous materials. Nature, 2000, 408(6811): 449-453.

[19] Wang H, Li X D, Yu J S , et al. Fabrication and characterization of ordered macroporous PMS-derived SiC from a sacrificial template method. J. Mater. Chem., 2004, 14: 1383-1386.

[20] St?ber W, Fink A, Bohn E. Controlled growth of monodispersed silica spheres in the micron size range. J. Colloid. Interface Sci., 1968, 26(1): 62-69.

[21] Areán C O, Delgado M R, Montouillout V, et al. NMR and FTIR spectroscopic studies on the acidity of gallia-silica prepared by a Sol-Gel route. Microporous and Mesoporous Mater., 2004, 67(2/3): 259-264.

[22] 所俊. SiC陶瓷及其复合材料的先驱体高温连接及陶瓷金属梯度材料的制备与连接研究. 长沙: 国防科学技术大学博士论文, 2005.

[23] LUO Zhao-Hua, JIANG Dong-Liang, ZHANG Jing-Xian, et al. Thermal shock behavior of the SiC-SiC joints joined with Na2O-B2O3-SiO2 glass solder. Journal of Inorganic Materials, 2012, 27(3): 234-238.