Fatigue Life Investigation of PZT Ceramics by MSP Method

doi:10.3724/SP.J.1077.2012.11803

Journal of Inorganic Materials ›› 2012, Vol. 27 ›› Issue (10): 1047-1052.DOI: 10.3724/SP.J.1077.2012.11803

• Research Paper • Previous Articles Next Articles

Fatigue Life Investigation of PZT Ceramics by MSP Method

DENG Qi-Huang¹, WANG Lian-Jun¹, XU Hong-Jie², WANG Hong-Zhi¹, JIANG Wan¹

(1. State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, Shanghai 201620, China; 2. Shanghai Career Metallurgy Furnace Materials Co. Ltd., Shanghai 200072, China)

Received:2011-12-27 Revised:2012-03-08 Published:2012-10-20 Online:2012-09-17
About author:DENG Qi-Huang. E-mail: dengqihuang@mail.dhu.edu.cn
Supported by:
Shanghai Science and Technology Committee, Key Project of Foundation Research (10JC1400500); Shanghai Leading Academic Discipline Project (B603); Aeronautical Science Foundation of China Project (201108M2001)

Abstract

Abstract: The cycle fatigue of PZT ceramic under different stress was investigated by modified small punch (MSP) tests. The research results show that residual strength and piezoelectric constant decrease with increasing cycle stress, which is attributed to crack propagation during cyclic stress process. The value of fatigue crack propagation (n) is calculated to be 395 according to the relationship between maximum stress and fatigue life. The fatigue life under series cycle maximum stress can be induce by fatigue crack propagation. Below the maximum strength of 79.1 MPa, the PZT ceramics can be used over 5 years.

Key words: PZT ceramic, modified small punch test, cycle fatigue, acoustic emission

CLC Number:

TQ032

DENG Qi-Huang, WANG Lian-Jun, XU Hong-Jie, WANG Hong-Zhi, JIANG Wan. Fatigue Life Investigation of PZT Ceramics by MSP Method[J]. Journal of Inorganic Materials, 2012, 27(10): 1047-1052.

References

[1] Newnham R E, Xu Q C, Kumar S, et al. Smart ceramics. Ferroelectrics, 1990, 102(117): 259–266.

[2] Duiker H M, Beale P D, Scott J F, et al. Fatigue and switching in ferroelectric memories- theory and experiment. Journal of Applied Physics, 1990, 68(11): 5783–5791.

[3] Jiang Q Y, Cross L E. effects of porosity on electric fatigue behavior in PLZT and PZT ferroelectric ceramics. Journal of Materials Science, 1993, 28(16): 4536–4543.

[4] Lee K Y, Ludema K C. Fatigue wear mechanism of alumina, simulated by synchronized biaxial repeated indentations. Wear, 1997, 205(1/2): 200–205.

[5] Alfredsson B, Olsson M. Inclined standing contact fatigue. Fatigue & Fracture of Engineering Materials & Structures. 2003, 26(7): 589–602.

[6] Song Y S, Park I, Jang J W, et al. In vitro Hertzian Fatigue Properties of Glass Infiltrated Ceramic Composites for Dental Crowns. 6th International Symposium on Eco-Materials Processing and Design, Jinju, South Korea, 2005.

[7] Fett T, Ernst E, Rizzi G, et al. Sphere contact fatigue of a coarse-grained Al2O3 ceramic. Fatigue & Fracture of Engineering Materials & Structures, 2006, 29(11): 876–886.

[8] Li J F, Wang S A, Wakabayashi K, et al. Properties of modified lead zirconate titanate ceramics prepared at low temperature (800℃) by hot isostatic pressing. Journal of the American Ceramic Society. 2000, 83(4): 955–957.

[9] Li J F, Pan W, Sato F, et al. Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures. Acta Materialia, 2001, 49(6): 937–945.

[10] Wang G, Jiang W, Bai G Z, et al. Effect of additions of oxide on microstructure and BDTT of MoSi2/oxide composites. Composite Materials III, 2003, 249: 91–95.

[11] Xiong Z, Jiang W, Shi Y, et al. Evaluation of high-temperature strength of Mo/PSZ composites by modified small punch tests. Materials Transactions, 2005, 46(3): 631–636.

[12] Jiang W, Bai G Z, Wang G, et al. High temperature strength of Mo/PSZ composites as evaluated by MSP test (II). Journal of Inorganic Materials, 2002, 17(5): 1034–1040.

[13] Jiang W, Li J F. Compositional dependence of thermal and mechanical properties for sintered Mo/PSZ composites. Acta Metallurgica Sinica, 2002, 38(4): 438–442.

[14] Jiang W, Wang G, Wu L B, et al. High temperature strength of Mo/PSZ composities as evaluated by MSP test (I). Journal of Inorganic Materials, 2002, 17(4): 827–832.

[15] Li J F, Kawai M, Kikuchi K, et al. Strength proof evaluation of diffusion-jointed W/Ta interfaces by small punch test. Journal of Nuclear Materials, 2003, 321(2/3): 129–134.

[16] Li J F, Takagi K, Terakubo N, et al. Electrical and mechanical properties of piezoelectric ceramic/metal composites in the Pb(Zr,Ti)O3/Pt system. Applied Physics Letters, 2001, 79(15): 2441–2443.

[17] Zhang H L, Li J F, Zhang B P. Fabrication and evaluation of PZT/Ag composites and functionally graded piezoelectric actuators. Journal of Electroceramics, 2006, 16(4): 413–417.

[18] Zhang H L, Li J F, Zhang B P, et al. Enhanced mechanical properties in Ag-particle-dispersed PZT piezoelectric composites for actuator applications. Materials Science and Engineering A, 2008, 498(1/2): 272–277.

[19] Evans A. Fatigue in ceramics. International Journal of Fracture, 1980, 16(6): 485–498.

[20] Wang N, Xie L, Song W, et al. Residual Strength Degradation Model for Low-Alloy Steel in High Cycle Fatigue Load. 2nd International Conference on Advances in Product Development and Reliability, Shenyang, China, 2010.

[21] Wang H, Wereszczak A A. Effects of electric field and biaxial flexure on the failure of poled Lead zirconate titanate. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2008, 55(12): 2559–2570.

[22] Liu S Y, Chen I W. Fatigue of yttria-stabilized zirconia.1. fatigue damage, fracture origins, and lifetime prediction. Journal of the American Ceramic Society, 1991, 74(6): 1197–1205.

[23] Liu S Y, Chen I W. Fatigue of yitria-stabilized zirconia.2.crack-propagation, fatigue striations, and short-crack behavior. Journal of the American Ceramic Society, 1991, 74(6): 1206–1216.

[24] Hill M D, White G S, Hwang C S, et al. Cyclic damage in lead zirconate titanate. Journal of the American Ceramic Society, 1996, 79(7): 1915–1920.

[25] Becher P F. Microstructural design of toughened ceramics. Journal of the American Ceramic Society, 1991, 74(2): 255–269.

[26] Brennan C. Model of ferroelectric fatigue due to defect/domain interactions. Ferroelectrics, 1993, 150(1): 199–208.

Fatigue Life Investigation of PZT Ceramics by MSP Method

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments

[1]	WU Xiaochen, ZHENG Ruixiao, LI Lu, MA Haolin, ZHAO Peihang, MA Chaoli. Research Progress on In-situ Monitoring of Damage Behavior of SiC_f/SiC Ceramic Matrix Composites at High Temperature Environments [J]. Journal of Inorganic Materials, 2024, 39(6): 609-622.
[2]	SHEN Xuanyi, MA Qin, XUE Yudong, LIAO Chunjin, ZHU Min, ZHANG Xiangyu, YANG Jinshan, DONG Shaoming. Effects of Multilayered Interfaces on Mechanical Damage of SiC_f/SiC Composites [J]. Journal of Inorganic Materials, 2023, 38(8): 917-922.
[3]	ZHANG Yachen, MENG Jia, CAI Kun, SHENG Xiaochen, LE Jun, SONG Lixin. Bending Failure Mechanism Study of Si-Cr-Ti High Temperature Oxidation Resistance Coating via Acoustic Emission Technique [J]. Journal of Inorganic Materials, 2021, 36(11): 1185-1192.
[4]	LI Longbin, XUE Yudong, HU Jianbao, YANG Jinshan, ZHANG Xiangyu, DONG Shaoming. Influence of SiC Nanowires on the Damage Evolution of SiC_f/SiC Composites [J]. Journal of Inorganic Materials, 2021, 36(10): 1111-1117.
[5]	ZHANG Yongzhen, TONG Xiaoyan, YAO Leijiang, LI Bin, BAI Guodong. Acoustic Emission Pattern Recognition on Tensile Damage Process of C/SiC Composites Using an Improved Genetic Algorithm [J]. Journal of Inorganic Materials, 2020, 35(5): 593-600.
[6]	HUANG Xi-Peng, WANG Bo, YANG Cheng-Peng, PAN Wen-Ge, LIU Xiao-Ying. Evaluating Damage Evolution of Three-dimension Needled C/SiC Composite Based on Acoustic Emission Signal Analysis [J]. Journal of Inorganic Materials, 2018, 33(6): 609-616.
[7]	DENG Qi-Huang, WANG Lian-Jun, WANG Hong-Zhi, JIANG Wan. Evaluation of Fatigue of the Lead Zirconate Titanate Ceramics under Electro-mechanical Coupling Field [J]. Journal of Inorganic Materials, 2012, 27(4): 358-362.
[8]	PAN Wen-Ge,JIAO Gui-Qiong,WANG Bo,GUAN Guo-Yang. Characterizing Damage Evolution of Three-dimensional Braided C/SiC Composite with AE Technology [J]. Journal of Inorganic Materials, 2004, 19(4): 871-875.