Direct Write Assembly of Three-dimensional PZT Woodpile Structure

doi:10.3724/SP.J.1077.2011.00495

Journal of Inorganic Materials ›› 2011, Vol. 26 ›› Issue (5): 495-498.DOI: 10.3724/SP.J.1077.2011.00495

• Research Paper • Previous Articles Next Articles

Direct Write Assembly of Three-dimensional PZT Woodpile Structure

CAI Kun-Peng¹, SUN Jing-Bo¹, LI Bo², ZHOU Ji¹

(1. State Key Laboratory of New Ceramics and Fine Processing, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China; 2. Research Institute for Advanced Materials, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China)

Received:2010-07-08 Revised:2010-08-23 Published:2011-05-20 Online:2011-06-07
Supported by:
National Natural Science Foundation of China (90922025, 50632030, 50621201, 10774087, 50902081)

Abstract

Abstract: A novel kind of water based lead zirconate titanate (PZT) ink was developed. Woodpile structures with diameter of micrometer scale were constructed from this ink by using direct write assembly technique. According to the rheological test, the ink shows shear-thinning behavior. Micro-morphology and density test results show that the sintered samples have formed ceramics with high relative density. Measurement of X-ray diffraction (XRD) shows that the main phase of sintered samples is rhombohedral PbZr_0.58Ti_0.42O₃. The value of piezoelectric constant d₃₃ is measured to be 410 pC/N, which shows that the sintered samples exhibit good piezoelectric property. The direct write assembly technique has merits of good designability, rapid forming capability and high precision prototyping, which provide new ideas and methods for the design and application of piezoelectric materials and devices.

Key words: direct write, PZT, ink preparation, piezoelectric property

CLC Number:

TB321

CAI Kun-Peng, SUN Jing-Bo, LI Bo2, ZHOU Ji. Direct Write Assembly of Three-dimensional PZT Woodpile Structure[J]. Journal of Inorganic Materials, 2011, 26(5): 495-498.

References

[1] Marcus H L, Beaman J J, Barlow J W, et al. Solid freeform fabrication-powder processing. Am. Ceram. Soc. Bull., 1990, 69(6): 1030-1031.

[2] Griffin C, Daufenbach J, Mcmillin S. Desk-top manufacturing - lom vs pressing. Am. Ceram. Soc. Bull., 1994, 73(8): 109-113.

[3] Teng W D, Edirisinghe M J, Evans J R G. Optimization of dispersion and viscosity of a ceramic let printing ink. J. Am. Ceram. Soc., 1997, 80(2): 486-494.

[4] Smay J E, Gratson G M, Shepherd R F, et al. Directed colloidal assembly of 3D periodic structures. Adv. Mater., 2002, 14(18): 1279-1283.

[5] Griffith L G, Naughton G. Tissue engineering-current challenges and expanding opportunities. Science, 2002, 295(5557): 1009-1014.

[6] Simon J L, Michna S, Lewis J A, et al. In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing. J. Biomed. Mater. Res. A, 2007, 83A(3): 747-758.

[7] Therriault D, White S R, Lewis J A. Chaotic mixing in three- dimensional microvascular networks fabricated by direct-write assembly. Nat. Mater., 2003, 2(4): 265-271.

[8] Wu W, Hansen C J, Aragon A M, et al. Direct-write assembly of biomimetic microvascular networks for efficient fluid transport. Soft Matter, 2010, 6(4): 739-742.

[9] Gratson G M, santamaria F G, Lousse V, et al. Direct-write assembly of three-dimensional photonic crystals: conversion of polymer scaffolds to silicon hollow-woodpile structures. Adv. Mater., 2006, 18(4): 461-465.

[10] Gates B D. Flexible electronics. Science, 2009, 323(5921): 1566-1567.

[11] Lewis J A. Direct ink writing of 3D functional materials. Adv. Funct. Mater., 2006, 16(17): 2193-2204.

[12] 孙竞博, 李勃, 黄学光, 等(SUN Jing-Bo, et al). 基于光敏浆料的直写精细无模三维成型. 无机材料学报(Journal of Inorganic Materials), 2009, 24(6): 1147-1150.

[1]	LIU Dingwei, ZENG Jiangtao, ZHENG Liaoying, MAN Zhenyong, RUAN Xuezheng, SHI Xue, LI Guorong. High Piezoelectric Property and Low Electric Field-strain Hysteresis of BiAlO₃-doped PZT Ceramics [J]. Journal of Inorganic Materials, 2022, 37(12): 1365-1370.
[2]	DONG Chang, LIANG Ruihong, ZHOU Zhiyong, DONG Xianlin. Piezoelectric Property of PZT-based Relaxor-ferroelectric Ceramics Enhanced by Sm Doping [J]. Journal of Inorganic Materials, 2021, 36(12): 1270-1276.
[3]	ZHANG Xiao-Chen, WANG Xue-Mei, WANG Chun-Lei. Influences of Sintering Methods on Microstructure and Physical Property of (K,Na,Li)(Nb,Sb,Ta)O₃ Piezoelectric Ceramics [J]. Journal of Inorganic Materials, 2019, 34(7): 721-726.
[4]	Xiang-Xiong ZENG, Jin-Chao YANG, Lian ZUO, Ben-Ben YANG, Jun QIN, Zhi-Hang PENG. Li/Ce/La Multidoping on Crystal Structure and Electric Properties of CaBi₂Nb₂O₉ Piezoceramics [J]. Journal of Inorganic Materials, 2019, 34(4): 379-386.
[5]	NIE Heng-Chang, WANG Yong-Ling, HE Hong-Liang, WANG Gen-Shui, DONG Xian-Lin. Recent Progress of Porous PZT95/5 Ferroelectric Ceramics [J]. Journal of Inorganic Materials, 2018, 33(2): 153-161.
[6]	XIA Biao-Jun, ZHOU Zhi-Yong, DONG Xian-Lin. Effect of Excessive Nb₂O₅ on the Sintering and Electrical Property of Lead Metaniobate Piezoelectric Ceramics [J]. Journal of Inorganic Materials, 2018, 33(11): 1248-1252.
[7]	WU Yan-Qing, ZHANG Jia-Liang, LIU Da-Kang, SUN Dan-Dan. Physical Properties of Ba(Ti_0.96Sn_0.04)O₃ Ceramics [J]. Journal of Inorganic Materials, 2016, 31(8): 850-854.
[8]	YU Yao, WANG Xu-Sheng, LI Yan-Xia, YAO Xi. Effect of Polarization on Mechanical Properties of Lead Zirconate Titanate Ceramics [J]. Journal of Inorganic Materials, 2015, 30(2): 219-224.
[9]	ZENG Tao, BAI Yang, SHEN Xi-Xun, WANG Bao-Feng, DONG Xian-Lin, ZHOU Zhi-Yong. Investigation on the Mechanical and Ferroelectric Properties of the Porous PZT 95/5 Ceramics [J]. Journal of Inorganic Materials, 2014, 29(7): 758-762.
[10]	WANG Da-Wei, ZHAO Quan-Liang, CAO Mao-Sheng, CUI Yan, ZHANG Shu-Jun. Effect of Sn Content on the Phase Structure and Electrical Properties of PbSnO₃-Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ Ternary Ceramics [J]. Journal of Inorganic Materials, 2014, 29(1): 28-32.
[11]	LAN Chun-Feng1, NIE Heng-Chang1, CHEN Xue-Feng, WANG Jun-Xia, WANG Gen-Shui, DONG Xian-Lin, LIU Yu-Sheng, HE Hong-Liang. Research on Low-temperature Phase Structures and Electrical Properties of Dense PZT 95/5 Ferroelectric Ceramics [J]. Journal of Inorganic Materials, 2013, 28(5): 502-506.
[12]	JIANG Min-Hong, LIU Xin-Yu, CHEN Guo-Hua, ZHU Gui-Sheng, XU Ji-Wen, MA Jia-Feng. Effect of LiSbO₃ Content on the Microstructure and Piezoelectric Properties of K_0.5Na_0.5NbO₃ Lead-free Ceramics Doped with BiMnO₃ [J]. Journal of Inorganic Materials, 2013, 28(3): 321-325.
[13]	CUI Ye-Rang, LIU Xin-Yu, YUAN Chang-Lai, ZHAI Xia, HU Yao-Bin, LI Ruo-Wen. Preparation and Properties of Sm₂O₃ Doped (Ba_0.7Ca_0.3)TiO₃-Ba(Zr_0.2Ti_0.8)O₃ Lead-free Piezoelectric Ceramics [J]. Journal of Inorganic Materials, 2012, 27(7): 731-734.
[14]	ZHU Kong-Jun, ZHU Ren-Qiang, DONG Na-Na, GU Hong-Hui, QIU Jin-Hao, JI Hong-Li. PZT Powders Synthesized by Hydrothermal Method [J]. Journal of Inorganic Materials, 2012, 27(5): 507-512.
[15]	DENG Qi-Huang, WANG Lian-Jun, WANG Hong-Zhi, JIANG Wan. Evaluation of Fatigue of the Lead Zirconate Titanate Ceramics under Electro-mechanical Coupling Field [J]. Journal of Inorganic Materials, 2012, 27(4): 358-362.

Direct Write Assembly of Three-dimensional PZT Woodpile Structure

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments