钛网表面含hBMP-2的复合涂层制备及hBMP-2的释放研究

doi:10.15541/jim20190127

无机材料学报 ›› 2020, Vol. 35 ›› Issue (2): 173-178.DOI: 10.15541/jim20190127 CSTR: 32189.14.10.15541/jim20190127

所属专题：生物材料论文精选(2020)；【虚拟专辑】药物递送(2020~2021)

钛网表面含hBMP-2的复合涂层制备及hBMP-2的释放研究

付亚康¹,翁杰²,刘耀文³,张科宏¹

1. 雅安职业技术学院, 雅安 625000
2. 西南交通大学材料科学与工程学院, 材料先进技术教育部重点实验室, 成都 610031
3. 四川农业大学食品学院, 雅安 625014

收稿日期:2019-03-25 修回日期:2019-05-04 出版日期:2020-02-20 网络出版日期:2019-05-29
作者简介:付亚康(1988-), 男, 硕士研究生, 讲师. E-mail: fykmail@163.com
基金资助:
国家自然科学基金(51572228);四川省教育厅自然科学基金(16ZB0546);雅安职业技术学院自然科学基金(2016yzk15)

hBMP-2 Contained Composite Coatings on Titanium Mesh Surface: Preparation and hBMP-2 Release

FU Ya-Kang¹,WENG Jie²,LIU Yao-Wen³,ZHANG Ke-Hong¹

1. Ya’an Polytechnic College, Ya’an 625000, China
2. Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
3. School of food, Sichuan Agricultural University, Ya’an 625014, China

Received:2019-03-25 Revised:2019-05-04 Published:2020-02-20 Online:2019-05-29
Supported by:
National Natural Science Foundation of China(51572228);Natural Science Foundation Project of Sichuan Provincial Education Department(16ZB0546);Natural Science Foundation Project of Ya' an Polytechnic College(2016yzk15)

摘要/Abstract

摘要：

为提高骨接合钛网的骨整合性和生物活性, 本研究采用碱热处理法在钛网表面构建出具有多孔结构的钛酸盐纳米纤维, 利用电化学沉积技术在钛酸盐纳米纤维表面制备磷酸钙涂层, 并采用不同方法将人骨形态发生蛋白(hBMP-2)引入涂层, 制备了三种含hBMP-2分子的复合涂层(TmhB、TmHedhB和TmHhBed)。实验对各复合涂层的表面形貌、化学成分、相组成和hBMP-2的含量与释放性能进行了表征。研究发现: 各涂层都具有多孔纤维结构, TmHedhB和TmHhBed中的磷酸钙相为羟基磷灰石(HA), 呈“串珠”状包裹在钛酸盐纳米纤维表面, “串珠”状HA的引入促进了复合涂层对hBMP-2的吸附。电化学共沉积技术在钛酸盐纳米纤维表面制备的HA/hBMP-2复合涂层中hBMP-2的含量最大, 达886 ng/mg, 在6~48 h内具有明显的hBMP-2缓释性能。

关键词: 钛, 碱热处理, 电化学沉积, 羟基磷灰石, 复合涂层, hBMP-2

Abstract:

Titanate nanofibers were prepared on titanium mesh by alkali-heat treatment, and calcium phosphate coating was fabricated on the porous titanate nanofibers by electrochemical deposition technology. Then hBMP-2 was introduced into the coating by different methods to improve its osteointegration and bioactivity. Three kinds of composite coatings modified by hBMP-2 were prepared (TmhB, TmHedhB and TmHhBed). Surface morphology, chemical composition, phase composition and hBMP-2 amounts and hBMP-2 release performance of the composite coatings were characterized by SEM, ATR-FTIR, XRD, and hBMP-2 ELISA kit, respectively. Results showed that all of the coatings display porous fiber structure, calcium phosphate phase in TmHedhB and TmHhBed samples was hydroxyapatite (HA), and bead-like HA particles formed on the surface of titanate nanofibers. Protein adsorption experiments showed that introduction of bead-like HA phase increased the hBMP-2 adsorption on the composite coatings, and composite coatings prepared by electrochemical co-deposition technique further enhanced hBMP-2 adsorption up to 886 ng/mg, which were supported hBMP-2 sustained release within 6-48 h.

Key words: titanium, alkali-heat treatment, electrochemical deposition, hydroxyapatite, composite coating, hBMP-2

中图分类号:

R318
TQ174

付亚康,翁杰,刘耀文,张科宏. 钛网表面含hBMP-2的复合涂层制备及hBMP-2的释放研究[J]. 无机材料学报, 2020, 35(2): 173-178.

FU Ya-Kang,WENG Jie,LIU Yao-Wen,ZHANG Ke-Hong. hBMP-2 Contained Composite Coatings on Titanium Mesh Surface: Preparation and hBMP-2 Release[J]. Journal of Inorganic Materials, 2020, 35(2): 173-178.

图/表 7

图1 电化学共沉积技术在钛网表面制备复合涂层的示意图

Fig. 1 Schematic diagram of preparation of composite coating on titanium mesh surface by electrochemical co-deposition

表1 钛网经碱热处理后各样品的不同制备方法

Table 1 Special fabrication procedures of titanium mesh after alkali-heat treatment

Sample	Special fabrication procedure
TmhB	hBMP-2 adsorption
TmHedhB	HA electrochemical deposition followed by hBMP-2 adsorption
TmHhBed	hBMP-2/HA electrochemical co-deposition

图2 钛网表面不同复合涂层的ATR-FTIR图谱

Fig. 2 ATR-FTIR spectra of different composite coatings on titanium mesh surface

图3 钛网表面不同复合涂层的XRD图谱

Fig. 3 XRD images of different composite coatings on titanium mesh surface

图4 钛网表面不同复合涂层的SEM照片

Fig. 4 SEM images of different composite coatings on titanium mesh surface (a-c) TmhB; (d-f) TmHedhB; (g-i) TmHhBed

图5 钛网表面不同复合涂层中hBMP-2的含量

Fig. 5 hBMP-2 content in different composite coatings on titanium mesh surface (*P < 0.05)

图6 钛网表面不同复合涂层中hBMP-2的释放曲线

Fig. 6 Release curves of hBMP-2 in different composite coatings on titanium mesh surface

参考文献 43

[1]	BUSER D, SCHENK R K, STEINEMANN S , et al. Influence of surface characteristics on bone integration of titanium implants. a histomorphometric study in miniature pigs. Journal of Biomedical Materials Research, 1991,25(7):889-902.
[2]	DABROWSKI B, SWIESZKOWSKI W, GODLINSKI D , et al. Highly porous titanium scaffolds for orthopaedic applications. Journal of Biomedical Materials Research Part B Applied Biomaterials, 2010,95B(1):53-61.
[3]	CARINE V, YANN C, DIDIER L O , et al. Surface modification of titanium with phosphonic acid to improve bone bonding: characterization by XPS and ToF-SIMS. Langmuir, 2002,18(7):2582-2589.
[4]	WANG X H, LI J S, HU R , et al. Mechanical properties and bioactive surface modification via alkali-heat treatment of porous titanium for biomedical applications. Advanced Materials Research, 2013,647:511-517.
[5]	DAS K, BALLA V K, BANDYOPADHYAY A , et al. Surface modification of laser-processed porous titanium for load-bearing implants. Scripta Materialia, 2008,59(8):822-825.
[6]	RAKHMATIA Y D, AYUKAWA Y, FURUHASHI A , et al. Current barrier membranes: titanium mesh and other membranes for guided bone regeneration in dental applications. J. Prosthodont. Res., 2013,57(1):3-14.
[7]	MARBACHER S, ANDRES R H, FATHI A R , et al. Primary reconstruction of open depressed skull fractures with titanium mesh. Journal of Craniofacial Surgery, 2008,19(2):490-495.
[8]	SCH N R, METZGER M C, ZIZELMANN C , et al. Individually preformed titanium mesh implants for a true-to-original repair of orbital fractures. International Journal of Oral & Maxillofacial Surgery, 2006,35(11):990-995.
[9]	NAKASE H, PARK Y S, KIMURA H , et al. Complications and long-term follow-up results in titanium mesh cage reconstruction after cervical corpectomy. Journal of Spinal Disorders & Techniques, 2006,19(19):353-357.
[10]	MARTIN M P, OLSON S . Post-operative complications with titanium mesh. Journal of Clinical Neuroscience, 2009,16(8):1080-1081.
[11]	CARRAD A . Development of bioactive hydroxyapatite coatings on titanium alloys. Key Engineering Materials, 2012,533:183-193.
[12]	LANGELIER B, WANG X, GRANDFIELD K . Atomic scale chemical tomography of human bone. Scientific Reports, 2017,7:39958.
[13]	KANE R, MA P X . Mimicking the nanostructure of bone matrix to regenerate bone. Materials Today, 2013,16(11):418-423.
[14]	HABIBOVIC P, YUAN H, VAN D D M , et al. Relevance of osteoinductive biomaterials in critical-sized orthotopic defect. Journal of Orthopaedic Research, 2010,24(5):867-876.
[15]	LI C, VEPARI C, JIN H J , et al. Electrospun silk-BMP-2 scaffolds for bone tissue engineering. Biomaterials, 2006,27(16):3115-3124.
[16]	MURPHY C M, SCHINDELER A, GLEESON J P , et al. A collagen- hydroxyapatite scaffold allows for binding and co-delivery of recombinant bone morphogenetic proteins and bisphosphonates. Acta Biomaterialia, 2014,10(5):2250-2258.
[17]	GUO X, PARK H, YOUNG S , et al. Repair of osteochondral defects with biodegradable hydrogel composites encapsulating marrow mesenchymal stem cells in a rabbit model. Acta Biomaterialia, 2010,6(1):39-47.
[18]	CHEN P C, XU Z K . Mineral-coated polymer membranes with superhydrophilicity and underwater superoleophobicity for effective oil/water separation. Sci. Rep., 2013,3(6153):2776.
[19]	USINSKAS P, STANKEVICIUTE Z, BEGANSKIENE A , et al. Sol-Gel derived porous and hydrophilic calcium hydroxyapatite coating on modified titanium substrate. Surface & Coatings Technology, 2016,307:935-940.
[20]	CHA C, LIECHTY W B, KHADEMHOSSEINI A , et al. Designing biomaterials to direct stem cell fate. ACS Nano, 2012,6(11):9353-9358.
[21]	LUTOLF M P, GILBERT P M, BLAU H M . Designing materials to direct stem-cell fate. Nature, 2009,462(7272):433-441.
[22]	DOM NGUEZ-TRUJILLO C, PE N E, CHICARDI E , et al. Sol-Gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications. Surface & Coatings Technology, 2017,333(15):158-162.
[23]	PENG H, USAS A, OLSHANSKI A , et al. VEGF improves, whereas sFlt1 inhibits, BMP2-induced bone formation and bone healing through modulation of angiogenesis. Journal of Bone & Mineral Research, 2010,20(11):2017-2027.
[24]	CHEN L, JIANG W, HUANG J , et al. Insulin-like growth factor 2(IGF-2) potentiates BMP-9-induced osteogenic differentiation and bone formation. Journal of Bone & Mineral Research, 2010,47(11):S432-S433.
[25]	BOSE S, TARAFDER S . Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review. Acta Biomaterialia, 2012,8(4):1401-1421.
[26]	KHAN S N, BOSTROM M P, LANE J M . Bone growth factors. Orthopedic Clinics of North America, 2000,31(3):375-387.
[27]	WANG Z, CHEN L, XU J , et al. Bioadhesive microporous architectures by self-assembling polydopamine microcapsules for biomedical applications. Chemistry of Materials, 2015,27(3):848-856.
[28]	ZHANG C D, XIAO D Q, FU Y K , et al. Fabrication of nanostructured hierarchical coatings composed of calcium phosphate/ titanate on titanium substrate. Key Engineering Materials, 2014, 575-576:253-258.
[29]	ZHAO H, DONG W, ZHENG Y , et al. The structural and biological properties of hydroxyapatite-modified titanate nanowire scaffolds. Biomaterials, 2011,32(25):5837-5846.
[30]	KOUTSOPOULOS S . Synthesis and characterization of hydroxyapatite crystals: a review study on the analytical methods. Journal of Biomedical Materials Research Part A, 2002,62(4):600-612.
[31]	PALAZZO B, IAFISCO M, LAFORGIA M , et al. Biomimetic hydroxyapatite-drug nanocrystals as potential bone substitutes with antitumor drug delivery properties. Advanced Functional Materials, 2010,17(13):2180-2188.
[32]	CAI L, LIN D, CHAI Y , et al. MBG scaffold containing chitosan microspheres as binary delivery system of IL-8 and BMP-2 for bone regeneration. Journal of Materials Chemistry B, 2018,6(27):4453-4465.
[33]	LU X, WANG Y B, LIU Y R , et al. Preparation of HA/chitosan composite coatings on alkali treated titanium surfaces through Sol-Gel techniques. Materials Letters, 2007,61(18):3970-3973.
[34]	PANG D, HE L, WEI L , et al. Preparation of a beta-tricalcium phosphate nanocoating and its protein adsorption behaviour by quartz crystal microbalance with dissipation technique. Colloids and Surfaces B: Biointerfaces, 2018,162:1-7.
[35]	DONG X, WANG Q, WU T , et al. Understanding adsorption- desorption dynamics of BMP-2 on hydroxyapatite(001) surface. Biophysical journal, 2007,93(3):750-759.
[36]	WALLWORK M L, KIRKHAM J, ZHANG J , et al. Binding of matrix proteins to developing enamel crystals: an atomic force microscopy study. Langmuir, 2001,17(8):2508-2513.
[37]	ZHU X, FAN H, LI D , et al. Protein adsorption and zeta potentials of a biphasic calcium phosphate ceramic under various conditions. J. Biomed. Mater. Res. B App.l Biomater., 2007,82(1):65-73.
[38]	ZHOU H, WU T, DONG X , et al. Adsorption mechanism of BMP-7 on hydroxyapatite(001) surfaces. Biochem. Biophys. Res. Commun., 2007,361(1):91-96.
[39]	KANDORI K, FUDO A, ISHIKAWA T . Study on the particle texture dependence of protein adsorption by using synthetic micrometer- sized calcium hydroxyapatite particles. Colloids and Surfaces B: Biointerfaces, 2002,24(2):145-153.
[40]	BOIX T, GOMEZ-MORALES J, TORRENT-BURGUES J , et al. Adsorption of recombinant human bone morphogenetic protein rhBMP-2m onto hydroxyapatite. Journal of Inorganic Biochemistry, 2005,99(5):1043-1050.
[41]	FU Y K, ZHOU X, XIAO D Q , et al. Influence of micro-nano structure of haydroxyapatite particles on protein adsorption. Journal of Inorganic Materials, 2015,30(5):523-528.
[42]	FU Y K, LI X Z, XIA X , et al. Effect of zeta potential of hydroxyapatite on protein adsorption. Progress in Modern Biomedicine, 2016,16(19):3610-3613.
[43]	IMAMURA T, KAITO T . Homeostasis and disorder of musculoskeletal system.BMP and TGF signaling and locomotive tissues. Clinical Calcium, 2018,28(3):313.

钛网表面含hBMP-2的复合涂层制备及hBMP-2的释放研究

hBMP-2 Contained Composite Coatings on Titanium Mesh Surface: Preparation and hBMP-2 Release

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 7

参考文献 43

相关文章 15

编辑推荐

Metrics

本文评价

[1]	朱文杰, 唐璐, 陆继长, 刘江平, 罗永明. 钙钛矿型氧化物催化氧化挥发性有机化合物的研究进展[J]. 无机材料学报, 2025, 40(7): 735-746.
[2]	何国强, 张恺恒, 王震涛, 包健, 席兆琛, 方振, 王昌昊, 王威, 王鑫, 姜佳沛, 李祥坤, 周迪. Ba(Nd_1/2Nb_1/2)O₃: 一种被低估的K40微波介质陶瓷[J]. 无机材料学报, 2025, 40(6): 639-646.
[3]	吴琼, 沈炳林, 张茂华, 姚方周, 邢志鹏, 王轲. 铅基织构压电陶瓷研究进展[J]. 无机材料学报, 2025, 40(6): 563-574.
[4]	姜昆, 李乐天, 郑木鹏, 胡永明, 潘勤学, 吴超峰, 王轲. PZT陶瓷的低温烧结研究进展[J]. 无机材料学报, 2025, 40(6): 627-638.
[5]	安然, 林锶, 郭世刚, 张冲, 祝顺, 韩颖超. 铁掺杂纳米羟基磷灰石的制备及紫外吸收性能研究[J]. 无机材料学报, 2025, 40(5): 457-465.
[6]	渠吉发, 王旭, 张维轩, 张康喆, 熊永恒, 谭文轶. 掺杂改性NaYTiO₄增强固体氧化物燃料电池阳极抗硫中毒性能[J]. 无机材料学报, 2025, 40(5): 489-496.
[7]	吕昕怿, 相恒阳, 曾海波. 长程有序助力钙钛矿QLED高性能化[J]. 无机材料学报, 2025, 40(1): 111-112.
[8]	瞿牡静, 张淑兰, 朱梦梦, 丁浩杰, 段嘉欣, 代恒龙, 周国红, 李会利. CsPbBr₃@MIL-53纳米复合荧光粉的合成、性能及其白光LEDs应用[J]. 无机材料学报, 2024, 39(9): 1035-1043.
[9]	肖梓晨, 何世豪, 邱诚远, 邓攀, 张威, 戴维德仁, 缑炎卓, 李金华, 尤俊, 王贤保, 林俍佑. 钙钛矿太阳能电池纳米纤维改性电子传输层研究[J]. 无机材料学报, 2024, 39(7): 828-834.
[10]	张慧, 许志鹏, 朱从潭, 郭学益, 杨英. 大面积有机-无机杂化钙钛矿薄膜及其光伏应用研究进展[J]. 无机材料学报, 2024, 39(5): 457-466.
[11]	陈甜, 罗媛, 朱刘, 郭学益, 杨英. 有机-无机共添加增强柔性钙钛矿太阳能电池机械弯曲及环境稳定性能[J]. 无机材料学报, 2024, 39(5): 477-484.
[12]	于嫚, 高荣耀, 秦玉军, 艾希成. 上转换发光纳米材料对钙钛矿太阳能电池迟滞效应和离子迁移动力学的影响[J]. 无机材料学报, 2024, 39(4): 359-366.
[13]	王兆阳, 秦鹏, 蒋胤, 冯小波, 杨培志, 黄富强. 三明治结构钌插层二氧化钛光催化四环素降解性能研究[J]. 无机材料学报, 2024, 39(4): 383-389.
[14]	李承瑜, 丁自友, 韩颖超. 锰掺杂纳米羟基磷灰石的体外抗菌-促成骨性能研究[J]. 无机材料学报, 2024, 39(3): 313-320.
[15]	陈正鹏, 金芳军, 李明飞, 董江波, 许仁辞, 徐韩昭, 熊凯, 饶睦敏, 陈创庭, 李晓伟, 凌意瀚. 双钙钛矿Sr₂CoFeO₅₊_δ阴极材料的制备及其中温固体氧化物燃料电池性能研究[J]. 无机材料学报, 2024, 39(3): 337-344.