无机材料学报

• 研究论文 • 上一篇    下一篇

纳米晶添加氧化铝粉体的低温烧结研究

李江; 潘裕柏; 宁金威; 黄莉萍; 郭景坤   

  1. 中国科学院上海硅酸盐研究所高性能陶瓷与超微结构国家重点实验室 上海 200050
  • 收稿日期:2002-09-04 修回日期:2002-11-25 出版日期:2003-11-20 网络出版日期:2003-11-20

Low Temperature Sintering of Bimodal Alumina Powder Mixtures with Nanocrystalline Component

LI Jiang; PAN Yu-Bai; NING Jin-Wei; HUANG Li-Ping; GUO Jing-Kun   

  1. State Key Lab of High Performance Ceramics and Superfine Microstructure; Shanghai Institute of Ceramics; Chinese Academy of Sciences; Shanghai 200050; China
  • Received:2002-09-04 Revised:2002-11-25 Published:2003-11-20 Online:2003-11-20

摘要: 以湿化学法制备的纳米α-Al2O3粉体作为添加剂,MgO和SiO2为烧结助剂,对商用γ-Al2O3粉体预处理后,采用无压烧结工艺,有效的降低了烧结温度.在1450℃制备了高性能的氧化铝陶瓷,并对添加α-Al2O3纳米晶的作用机理进行了研究.

关键词: 氧化铝陶瓷, 低温烧结, 湿化学法, 纳米晶

Abstract: Nanocrystalline α-Al2O3 powder was prepared by a wet-chemical method calcining the dry NH4Al(OH)2CO3 precursor synthesized from NH4Al(SO4)2 and NH4HCO3. Alumina ceramics were fabricated by pressureless sintering process at 1450℃ from bimodal alumina powder mixtures with the prepared nanocrystalline component using MgO and SiO2 as additives. The effect of nanocrystalline α-Al2O3 component on alumina ceramics was also studied. The materials fabricated have better mechanical properties.

Key words: Al2O3 ceramics, low temperature sintering, wet-chemical method, nanocrystalline

中图分类号: