Journal of Inorganic Materials

Previous Articles     Next Articles

Thermodynamic and High-temperature Recovery Kinetics of Irradiation Defects in Neutron-irradiated 6H-SiC

ZHU Fei1, HAO Xujie1, ZHANG Quangui1, YAN Xinyue1, LIU Hongfei1, ZHANG Bo2, LI Xin3, LIU Defeng3, TUO Yayong1, ZHANG Shouchao1   

  1. 1. School of Science, Tianjin Chengjian University, Tianjin 300384, China;
    2. School of Materials Science and Engineering, Tianjin Chengjian University, Tianjin 300384, China;
    3. Aviation Key Laboratory of Science and Technology on Special Condition Monitoring Sensor Technology, Beijing Changcheng Aeronautic Measurement and Control Technology Research Institute, Beijing 101111, China
  • Received:2025-05-19 Revised:2025-07-01
  • About author:ZHU Fei (1983-), male, engineer. E-mail: zhufei2012@tcu.edu.cn
  • Supported by:
    National Undergraduate Training Program for Innovation and Entrepreneurship (202510792019)

Abstract: Silicon carbide (SiC) is a promising material for nuclear reactor structures due to its excellent radiation resistance and high-temperature performance. The behavior of irradiation damage and the mechanisms of high-temperature recovery in SiC directly affect its service performance and longevity in nuclear environments. This study systematically investigated the effects of neutron irradiation on the properties of 6H-SiC, with a particular focus on the high-temperature recovery mechanisms of irradiation-induced defects. Specifically, defect evolution and thermodynamic responses in nitrogen-doped (ND ≈ 3.0×1019 cm⁻³) 6H-SiC subjected to neutron irradiation (irradiation temperature~150 ℃, fluence 2.58×1020 n/cm²) followed by isochronal annealing were examined. Integrated techniques and first-principles calculations were employed to comprehensively analyze structural and property evolution. The key findings of our study were as follows: (1) Significant lattice swelling was observed during irradiation, with swelling rates of 0.416% along the a-axis, 0.430% along the c-axis, and a 1.310% increase in the unit cell volume, all while maintaining the integrity of single-crystalline structure. (2) A 14.7% increase in specific heat capacity was recorded, with 375.4 J/g of stored irradiation energy being released during heating from 100 ℃ to 500 ℃. (3) a four-stage defect recovery kinetic model was proposed based on the recovery of lattice parameters and the evolution of Raman spectra: Stage I (RT-600 ℃): This stage is primarily dominated by the close-range recombination of carbon Frenkel pairs, with a migration energy (Ea) of approximately 0.14 eV. Stage II (600-850 ℃): This stage involves the recombination of silicon Frenkel pairs and the migration of carbon interstitials (Ea ≈ 0.26 eV). Stage III (850-1200 ℃): Lattice reconstruction driven by vacancy migration occurs, with a migration energy of approximately 0.65 eV. Stage IV (1200-1500 ℃): This stage is characterized by long-range diffusion of carbon vacancies (VC) and the dissociation of NCVSi complexes, with a migration energy of approximately 1.5 eV. (4) Raman and photoluminescence spectroscopy confirms the presence of nitrogen-stabilized NCVSi defect configurations, which exhibit a characteristic emission peak at 826 nm (634 cm⁻¹ Raman shift) when excited with 785 nm light. This study quantitatively reveals the defect recovery pathways and migration energies in neutron-irradiated 6H-SiC, thereby enhancing understanding of its thermodynamic responses and high-temperature recovery kinetics. It provides a critical foundation for evaluating radiation damage, predicting performance, and optimizing annealing processes in nuclear-grade SiC materials.

Key words: irradiation-induced energy storage, specific heat, Raman spectroscopy, defect luminescence, Arrhenius

CLC Number: