Journal of Inorganic Materials ›› 2015, Vol. 30 ›› Issue (8): 882-886.DOI: 10.15541/jim20150016

• Orginal Article • Previous Articles     Next Articles

Microwave Dielectric Properties of LaPO4 Ceramics Synthesized by a Hydrothermal Method

XIE Hui-Dong, LI Fei, CHEN Chao, XI Hai-Hong, SHI Ling   

  1. (School of Science, Xi’an University of Architecture and Technology, Xi’an 710055, China)
  • Received:2015-01-09 Published:2015-05-10 Online:2015-07-21
  • Supported by:
    Foundation item: Special Funded Project of Shaanxi Education Department (14JK1424, 2013JK0975)

Abstract:

Lanthanum orthophosphate (LaPO4) ceramics were obtained by using hydrothermal prepared powders and solid-state reaction prepared powders in a sintering temperature range of 1030-1340℃ and 1300-1460℃, respectively. The sintering and microwave dielectric properties of hydrothermal processed LaPO4 ceramics were compared with those of solid-state reaction processed LaPO4. The results showed that hydrothermal processed LaPO4 had a higher sinterability and better microwave dielectric properties due to its much finer particle size when compared with solid-state reaction processed LaPO4. The best microwave dielectric properties of the hydrothermal processed LaPO4 ceramics were obtained when the ceramics sintered at 1260℃ for 2 h with a permittivity~10.2, a Q×f value about 129704 GHz (at 10.2 GHz) and a temperature coefficient value of -58.6×10-6/℃. The Q×f value of hydrothermal processed LaPO4 ceramics was 2.47 times greater than that of solid-state reaction processed LaPO4 ceramics, while the sintering temperature of the former was 140℃ lower than that of the latter in the literature.

Key words: microwave dielectric properties, hydrothermal synthesis, lanthanum orthophosphate, sintering behavior

CLC Number: