高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

低温快速烧结软磁铁氧体材料

王依琳; 吴文骏; 毛文东; 赵梅瑜   

  1. 中国科学院上海硅酸盐研究所 上海 200050
  • 收稿日期:2002-04-01 修回日期:2002-05-09 出版日期:2003-05-20 网络出版日期:2003-05-20

Fast Sintering Soft Ferrite Materials at Low Temperature

WANG Yi-Lin; WU Wen-Jun; MAO Wen-Dong; ZHAO Mei-Yu   

  1. Shanghai Institute of Ceramics; Chinese Academy of Sciences; Shanghai 200050; China
  • Received:2002-04-01 Revised:2002-05-09 Published:2003-05-20 Online:2003-05-20

PDF (PC)

1082

被引次数

10

摘要： 研究了Bi2O3-V2O5系复合添加剂对Ni-Cu-Zn铁氧体的烧结及其磁性能的影响.研究表明,Bi2O3-V2O5系复合添加剂具有促进晶粒生长的作用,随着添加量的增加,样品断面形貌显示大晶粒增多,X射线衍射分析表明,过多的添加剂引起少量的杂相析出,晶界变宽。然而,适当量的Bi2O3-V2O5系复合添加剂能使普通Ni-Cu-Zn铁氧体的烧结温度降至875℃以下,烧结时间缩短为30min,烧结样品的磁导率可达195(10MHz)。

关键词: 低温烧结, 软磁铁氧体, 烧结助剂

Abstract: The effects of Bi2O3-V2O5 on sinterability and magnetic properties were investigated. The results show that, the addition of Bi2O3-V2O5
can accelerate the grains growing. The morphology of the sample’s section shows large grains increasing in direct ratio with amount of the addition. XRD patterns
confirm that a small amount of unknown phases appear and the grain boundary becomes more thick with an increace of the amount of the additive. But, this addition of
sintering aids can lower the sintering temperature to less than 875℃, and shorten soaking time to 30min for Ni-Cu-Zn ferrite. The permeability of the
ferrite added 1wt% the sintering aids can reach to 195 at 10MHz.

Key words: low firing, soft ferrite, sintering aids

中图分类号: