正极包覆与界面修饰: 双策略改善聚氧化乙烯固态电解质对高电压正极稳定性

doi:10.15541/jim20230215

无机材料学报 ›› 2023, Vol. 38 ›› Issue (12): 1466-1474.DOI: 10.15541/jim20230215 CSTR: 32189.14.10.15541/jim20230215

所属专题：【能源环境】锂离子电池(202409)

正极包覆与界面修饰: 双策略改善聚氧化乙烯固态电解质对高电压正极稳定性

谭淑雨(), 刘晓宁, 毕志杰, 万勇(), 郭向欣()

青岛大学物理科学学院, 青岛 266071

收稿日期:2023-05-05 修回日期:2023-06-25 出版日期:2023-07-28 网络出版日期:2023-07-28
通讯作者: 万勇, 教授. E-mail: wanyongqd@hotmail.com;
郭向欣, 教授. E-mail: xxguo@qdu.edu.cn
作者简介:谭淑雨(1998-), 女, 硕士研究生. E-mail: tsy1576362772@163.com

Jointing of Cathode Coating and Interface Modification for Stabilizing Poly(ethylene oxide) Electrolytes Against High-voltage Cathodes

TAN Shuyu(), LIU Xiaoning, BI Zhijie, WAN Yong(), GUO Xiangxin()

College of Physics, Qingdao University, Qingdao 266071, China

Received:2023-05-05 Revised:2023-06-25 Published:2023-07-28 Online:2023-07-28
Contact: WAN Yong, professor. E-mail: wanyongqd@hotmail.com;
GUO Xiangxin, professor. E-mail: xxguo@qdu.edu.cn
About author:TAN Shuyu (1998-), female, Master candidate. E-mail: tsy1576362772@163.com
Supported by:
National Natural Science Foundation of China(22005163);National Natural Science Foundation of China(U1932205);Natural Science Foundation of Shandong Province(ZR2020MA084);Key R&D Program of Shandong Province(2021CXGC010401);Taishan Scholars Program(ts201712035)

摘要/Abstract

摘要：

聚氧化乙烯(PEO)基固体电解质具有成本低、对锂稳定、易于大规模生产等优点, 是固态锂电池最有前途的固体电解质。然而, PEO对高压正极不稳定, 严重限制了其在高能量密度领域的应用。本研究在LiNi_0.6Co_0.2Mn_0.2O₂ (NCM)正极颗粒上部分包覆环化聚丙烯腈(cPAN)纳米层作为电子导电层, 在NCM/PEO界面上引入离子液体作为离子导电通道, 用以提高PEO与高压NCM正极的相容性。其中, cPAN层不仅在物理上隔离了PEO电解质与NCM正极的直接接触, 而且cPAN中具有非局域的sp² π键, 有助于正极内部的电子传输。同时, 高离子电导率的离子液体的流动性较高, 可以充分润湿正极侧界面, 并在循环过程中分解为富LiF和Li₃N的CEI层, 进一步限制PEO电解质的氧化分解。基于上述复合策略的固态NCM/Li电池可在0.1C (1C=0.18 A·g^-1), 4.30 V截止电压下稳定循环100次, 且容量保持率可达85.3%。本研究通过表面包覆和界面修饰, 为提高PEO基电解质对高压正极的稳定性提供了可行方案。

关键词: 聚氧化乙烯, 环化, 高电压正极, 界面工程, 固态锂电池

Abstract:

Poly(ethylene oxide) (PEO)-based solid electrolytes are deemed as the most promising alternatives for solid-state lithium batteries on account of their low cost, good stability against Li metal, and easy large-scale production. However, the instability of PEO against high-voltage cathodes severely limits its application in the fields needing high energy density. In this work, a discontinuous cyclized polyacrylonitrile (cPAN) nanolayer, served as an electron-conducting shell, is partially coated on LiNi_0.6Co_0.2Mn_0.2O₂ (NCM) cathode particles, while an ionic liquid acted as ion-conducting pathway is introduced at NCM/PEO interface, enabling the high compatibility of PEO against high-voltage NCM cathode. The cPAN layer not only physically isolates the direct contact of PEO electrolyte from NCM cathode, but also contributes to the electronic transfer inside the cathode due to the formation of delocalized sp² π bond during coating process. Meanwhile, the mobile ionic liquid with good ionic conductivity fully wets cathodic interface, followed by decomposition into cathode-electrolyte interphase (CEI) of LiF and Li₃N, further restricting the oxidation-failure of PEO electrolyte. By taking the combined strategy, the corresponding solid-state NCM/Li battery delivers an excellent electrochemical performance with a capacity retention of 85.3% after 100 cycles at rate of 0.1C (1C=0.18 A·g^-1) under a cutoff voltage of 4.30 V. This work opens up a new direction to address the interfacial stability issues of PEO-based electrolyte against high-voltage cathodes through surface coating and interface modification.

Key words: poly(ethylene oxide), cyclization, high-voltage cathode, interface engineering, solid-state lithium battery

中图分类号:

TM911

谭淑雨, 刘晓宁, 毕志杰, 万勇, 郭向欣. 正极包覆与界面修饰: 双策略改善聚氧化乙烯固态电解质对高电压正极稳定性[J]. 无机材料学报, 2023, 38(12): 1466-1474.

TAN Shuyu, LIU Xiaoning, BI Zhijie, WAN Yong, GUO Xiangxin. Jointing of Cathode Coating and Interface Modification for Stabilizing Poly(ethylene oxide) Electrolytes Against High-voltage Cathodes[J]. Journal of Inorganic Materials, 2023, 38(12): 1466-1474.

图/表 14

Fig. 1 (a) Preparation process of NCM@cPAN powder, (b) schematic representation of as-prepared NCM@cPAN particle, and (c) schematic diagram of the solid-state NCM@cPAN+IL/PEO/Li cell

Fig. 2 (a) FT-IR spectra of pristine PAN and PAN treated at 400 ℃, (b) schematic diagrams of pristine PAN and cPAN, and (c) Raman spectra of PAN, cPAN, NCM, and NCM@cPAN

Fig. 3 (a) XRD patterns of NCM, NCM@PAN, and NCM@cPAN powders; SEM images of (b, c) NCM, (d, e) NCM@PAN, and (f, g) NCM@cPAN powders; (h, i) TEM images of NCM@cPAN; (j) EDS mappings of C, N, O, Mn, Co and Ni elements of the region in (f)

Fig. 4 Cycling performance of solid-state NCM@cPAN+IL/PEO/Li batteries Typical charge-discharge curves and the corresponding specific capacities with cutoff voltages of (a, d) 4.20 V, (b, e) 4.25 V, and (c, f) 4.30 V

Fig. 5 (a) Charge-discharge curves, and (b) corresponding specific capacities for solid-state NCM@cPAN+IL/PEO/Li batteries at various current densities; (c) Typical charge-discharge curves and (d) corresponding specific capacities and Coulombic efficiency for solid-state NCM@cPAN+IL/PEO/Li batteries with high cathode loading of ~6.2 mg·cm-2

Fig. 6 (a, c) F1s and (b, d) N1s XPS spectra of PP13-TFSI (a, b) before and (c, d) after cycling; (e) Schematic diagram of TFSI− decomposition during cycling

Fig. 7 (a) FT-IR spectra of PEO electrolyte before and after cycling; SEM images of NCM@cPAN cathodes (b) before and (c) after cycling; (d) Ni2p XPS spectra of NCM@cPAN cathode before and after cycling

Fig. S1 (a) Nyquist plots of PEO-based electrolyte at different temperatures; (b) Arrhenius plot of PEO-based electrolyte

Fig. S2 LSV curve of PEO-based electrolyte

Fig. S3 Charge-discharge curve of NCM/PEO/Li batteries without IdiL at 50 ℃

Fig. S4 Rate performance of solid NCM@cPAN+IL/PEO/Li batteries at various current densities (a, c) Typical charge-discharge curves and (b, d) corresponding specific capacities with the cutoff voltages of (a, b) 4.25 V, and (c, d) 4.30 V

Fig. S5 Charge-discharge curve of NCM@cPAN/PEO/Li batteries without IL at 50 ℃

Fig. S6 Charge-discharge curve of NCM/PEO/Li batteries with IL at 50 ℃

Fig. S7 XRD patterns of PEO electrolytes before and after cycling

参考文献 40

[1]	CHENG X B, ZHANG R, ZHAO C Z, et al. Toward safe lithium metal anode in rechargeable batteries: a review. Chemical Reviews, 2017, 117(15): 10403. DOI URL
[2]	LIU J, BAO Z, CUI Y, et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nature Energy, 2019, 4(3): 180. DOI
[3]	MA G, GUO L, DING X, et al. Effect of dual-functional electrolyte additive on high temperature and high voltage performance of Li-ion battery. Journal of Inorganic Materials, 2022, 37(7): 710. DOI
[4]	XU H, SHI J, HU G, et al. Hybrid electrolytes incorporated with dandelion-like silane-Al₂O₃ nanoparticles for high-safety high- voltage lithium ion batteries. Journal of Power Sources, 2018, 391: 113.
[5]	COMMARIEU B, PAOLELLA A, DAIGLE J C, et al. Toward high lithium conduction in solid polymer and polymer-ceramic batteries. Current Opinion in Electrochemistry, 2018, 9: 56.
[6]	LI Y, MAO J, WEI C, et al. In-situ modification of carbon nanotubes with metallic bismuth nanoparticles for uniform lithium deposition. Journal of Inorganic Materials, 2022, 37(12): 1337. DOI URL
[7]	WANG J, GE B, LI H, et al. Challenges and progresses of lithium-metal batteries. Chemical Engineering Journal, 2021, 420: 129739.
[8]	ZHANG H, DAI R, ZHU S, et al. Bimetallic nitride modified separator constructs internal electric field for high-performance lithium-sulfur battery. Chemical Engineering Journal, 2022, 429: 132454.
[9]	WEN Z, LIANG F. MOF/poly(ethylene oxide) composite polymer electrolyte for solid-state lithium battery. Journal of Inorganic Materials, 2021, 36(3): 332. DOI
[10]	FAN L, WEI S, LI S, et al. Recent progress of the solid-state electrolytes for high-energy metal-based batteries. Advanced Energy Materials, 2018, 8(11): 1702657. DOI URL
[11]	LIN D, YUEN P Y, LIU Y, et al. A silica-aerogel-reinforced composite polymer electrolyte with high ionic conductivity and high modulus. Advanced Materials, 2018, 30(32): 1802661. DOI URL
[12]	ZHAO Y, ZHENG K, SUN X. Addressing interfacial issues in liquid-based and solid-state batteries by atomic and molecular layer deposition. Joule, 2018, 2(12): 2583. DOI URL
[13]	WU J, RAO Z, CHENG Z, et al. Ultrathin, flexible polymer electrolyte for cost-effective fabrication of all-solid-state lithium metal batteries. Advanced Energy Materials, 2019, 9(46): 1902767. DOI URL
[14]	CHEN R, LI Q, YU X, et al. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces. Chemical Reviews, 2020, 120(14): 6820. DOI PMID
[15]	WAN Z, LEI D, YANG W, et al. Low resistance-integrated all- solid-state battery achieved by Li₇La₃Zr₂O₁₂ nanowire upgrading polyethylene oxide (PEO) composite electrolyte and PEO cathode binder. Advanced Functional Materials, 2019, 29(1): 1805301. DOI URL
[16]	BALAISH M, GONZALEZ-ROSILLO J C, KIM K J, et al. Processing thin but robust electrolytes for solid-state batteries. Nature Energy, 2021, 6(3): 227. DOI
[17]	LIU X Y, LIU B D, JIANG Y N, et al. In-situ synthesis of perovskite SrTiO₃ nanostructures with modified morphology and tunable optical absorption property. Journal of Inorganic Materials, 2019, 34(1): 65. DOI URL
[18]	NIE K, WANG X, QIU J, et al. Increasing poly(ethylene oxide) stability to 4.5 V by surface coating of the cathode. ACS Energy Letters, 2020, 5(3): 826. DOI URL
[19]	HUO H, CHEN Y, LUO J, et al. Rational design of hierarchical “ceramic-in-polymer” and “polymer-in-ceramic” electrolytes for dendrite-free solid-state batteries. Advanced Energy Materials, 2019, 9(17): 1804004. DOI URL
[20]	YANG X, JIANG M, GAO X, et al. Determining the limiting factor of the electrochemical stability window for PEO-based solid polymer electrolytes: main chain or terminal -OH group? Energy & Environmental Science, 2020, 13(5): 1318.
[21]	YANG Q, HUANG J, LI Y, et al. Surface-protected LiCoO₂ with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries. Journal of Power Sources, 2018, 388: 65.
[22]	LIANG J, SUN Y, ZHAO Y, et al. Engineering the conductive carbon/PEO interface to stabilize solid polymer electrolytes for all-solid-state high voltage LiCoO₂ batteries. Journal of Materials Chemistry A, 2020, 8(5): 2769. DOI URL
[23]	XU H, CHIEN P H, SHI J, et al. High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide). Proceedings of the National Academy of Sciences of the United States of America, 2019, 116(38): 18815. DOI PMID
[24]	WANG Y, LIU B N, ZHOU G, et al. Improved electrochemical performance of Li(Ni_0.6Co_0.2Mn_0.2)O₂ at high charging cut-off voltage with Li_1.4Al_0.4Ti_1.6(PO₄)₃ surface coating. Chinese Physics B, 2019, 28(6): 068202. DOI
[25]	QIU J, YANG L, SUN G, et al. A stabilized PEO-based solid electrolyte via a facile interfacial engineering method for a high voltage solid-state lithium metal battery. Chemical Communications, 2020, 56(42): 5633. DOI URL
[26]	FENG W, LI J, LIU H, et al. In-situ modification of ultrathin and uniform layer on LiCoO₂ particles for 4.2 V polyethylene oxide based solid-state lithium batteries with excellent cycle performance. Electrochimica Acta, 2022, 421: 140473.
[27]	LI Z, LI A, ZHANG H, et al. Interfacial engineering for stabilizing polymer electrolytes with 4 V cathodes in lithium metal batteries at elevated temperature. Nano Energy, 2020, 72: 104655.
[28]	FU F, ZHENG Y, JIANG N, et al. A dual-salt PEO-based polymer electrolyte with cross-linked polymer network for high-voltage lithium metal batteries. Chemical Engineering Journal, 2022, 450: 137776.
[29]	ZHOU W, WANG Z, PU Y, et al. Double-layer polymer electrolyte for high-voltage all-solid-state rechargeable batteries. Advanced Materials, 2019, 31(4): 1805574. DOI URL
[30]	SUN Y, DONG H, XU Y, et al. Incorporating cyclized- polyacrylonitrile with Li₄Ti₅O₁₂ nanosheet for high performance lithium ion battery anode material. Electrochimica Acta, 2017, 246: 106.
[31]	SUN X L, LIU Z, CHENG Z L. Design and fabrication of in-situ N-doped paper-like carbon nanofiber film for thiophene removal from a liquid model fuel. Journal of Hazardous Materials, 2020, 389: 121879.
[32]	HONG Y, HU Q, DONG H, et al. N-doped carbon coated porous hierarchical MnO microspheres as superior additive-free anode materials for lithium-ion batteries. Scripta Materialia, 2022, 211: 114495.
[33]	HAMEDANI A A, OW-YANG C W, HAYAT SOYTAS S. Silicon nanocrystals-embedded carbon nanofibers from hybrid polyacrylonitrile-TEOS precursor as high-performance lithium-ion battery anodes. Journal of Alloys and Compounds, 2022, 909: 164734.
[34]	FENG W, LIU H, ZHAO M, et al. Improving interfacial stability by in situ protective layer formation in 4.2 V poly(ethylene oxide) based solid state lithium batteries. Journal of Power Sources, 2022, 523: 231062.
[35]	XIE Z, WU Z, AN X, et al. 2-Fluoropyridine: a novel electrolyte additive for lithium metal batteries with high areal capacity as well as high cycling stability. Chemical Engineering Journal, 2020, 393: 124789.
[36]	CHEN K, SUN Y, ZHAO C, et al. A semi-interpenetrating network polymer electrolyte membrane prepared from non-self- polymerized precursors for ambient temperature all-solid-state lithium-ion batteries. Journal of Solid State Chemistry, 2021, 296: 121958.
[37]	YAN C, YAO Y X, CHEN X, et al. Lithium nitrate solvation chemistry in carbonate electrolyte sustains high-voltage lithium metal batteries. Angewandte Chemie International Edition, 2018, 57(43): 14055. DOI URL
[38]	LI T, ZHANG X Q, SHI P, et al. Fluorinated solid-electrolyte interphase in high-voltage lithium metal batteries. Joule, 2019, 3(11): 2647. DOI URL
[39]	POLU A R, RHEE H W. Ionic liquid doped PEO-based solid polymer electrolytes for lithium-ion polymer batteries. International Journal of Hydrogen Energy, 2017, 42(10): 7212. DOI URL
[40]	SONG G, ZHONG H, WANG Z, et al. Interfacial film Li_1.3Al_0.3Ti_1.7PO₄-coated LiNi_0.6Co_0.2Mn_0.2O₂ for the long cycle stability of lithium-ion batteries. ACS Applied Energy Materials, 2019, 2(11): 7923. DOI URL

正极包覆与界面修饰: 双策略改善聚氧化乙烯固态电解质对高电压正极稳定性

Jointing of Cathode Coating and Interface Modification for Stabilizing Poly(ethylene oxide) Electrolytes Against High-voltage Cathodes

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 14

参考文献 40

相关文章 4

编辑推荐

Metrics

本文评价

[1]	夏求应, 孙硕, 昝峰, 徐璟, 夏晖. 非晶LiSiON薄膜电解质的全固态薄膜锂电池性能[J]. 无机材料学报, 2022, 37(2): 230-236.
[2]	梁凤青, 温兆银. 固态锂电池用MOF/聚氧化乙烯复合聚合物电解质[J]. 无机材料学报, 2021, 36(3): 332-336.
[3]	柯剑煌, 谢凯, 韩喻, 孙巍巍, 罗世强, 刘锦锋. 基于不同共溶剂体系对于高电压正极材料LiCoPO₄的形貌控制[J]. 无机材料学报, 2019, 34(6): 618-624.
[4]	杜付明, 赵宁, 方锐, 崔忠慧, 李忆秋, 郭向欣. 电子导电剂对石榴石基固态锂电池循环性能的影响[J]. 无机材料学报, 2018, 33(4): 462-468.