无机材料学报

• 研究论文 • 上一篇    下一篇

氧化铝纳米线的催化氧化法制备及表征

杨琪, 刘磊, 沈彬, 胡文彬   

  1. 上海交通大学金属基复合材料国家重点实验室, 上海 200030
  • 收稿日期:2006-03-20 修回日期:2006-06-05 出版日期:2007-03-20 网络出版日期:2007-03-20

Preparation and Characterization of Alumina Nanowires by Catalytic Oxidation

YANG Qi, LIU Lei, SHEN Bin, HU Wen-Bin   

  1. State Key Laboratory of Metal Matrix Composites, Shanghai Jiaotong University, Shanghai 200030, China
  • Received:2006-03-20 Revised:2006-06-05 Published:2007-03-20 Online:2007-03-20

摘要: 以汞为介质, 通过铝的催化氧化反应制备出氧化铝纳米线. 采用FE-SEM、TEM、EDX、XRD、IR等手段对氧化铝纳米线进行表征. 结果表明, 氧化铝纳米线直径为5~15nm, 无定型结构. 随着反应温度、铝纯度、反应气氛中的氧含量升高, 氧化铝纳米线比表面积增大; HgCl2溶液浓度、铝浸入溶液的时间对氧化铝纳米线的比表面积没有明显影响.

关键词: 氧化铝, 纳米线, 汞, 催化氧化

Abstract: Alumina nanowires, amorphous, with diameters from 5 to 15nm, were prepared by catalytic oxidation with mercury as medium. FE-SEM, TEM, EDX, XRD, IR were used to characterize alumina nanowires. With elevation of temperature, oxygen content and purity of aluminium, the alumina nanowires’ specific surface area increases. The concentration of HgCl2 solution and the immersing time of aluminium have no apparent influence on alumina nanowires’ specific surface area.

Key words: alumina, nanowires, mercury, catalytic oxidation

中图分类号: