Journal of Inorganic Materials

• Research Letter •    

Regulation of Structure and Interfacial Stability of Li3InCl6 Electrolyte via Oxygen-Source Doping

DENG Miao1,2, ZHAO Qun1, YU Chuang1,2   

  1. 1. School of Information Mechanics and Sensing Engineering, Xidian University, Xi’an 710126, China;
    2. School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 438400, China
  • Received:2026-04-29 Revised:2026-07-16
  • Contact: YU Chuang, professor. E-mail: yuchuang@xidian.edu.cn, cyu2020@hust.edu.cn
  • About author:DENG Miao (1996–), female, PhD candidate. E-mail: d202480154@hust.edu.cn
  • Supported by:
    National Natural Science Foundation of China (52177214); National Key Research and Development Program of China (2021YFB2500200)

Abstract: Li3InCl6 (LIC) is a halide solid electrolyte with high ionic conductivity and excellent processability. However, its insufficient stability under high-voltage conditions, together with poor interfacial compatibility with sulfide electrolytes and high-nickel cathodes, limits its practical application. To address these issues, an oxygen-source regulation strategy was proposed by employing Li2O and In2O3 as oxygen precursors to tailor the structure and electrochemical properties of LIC. The monoclinic C2/m crystal structure is well preserved after oxygen incorporation, while different oxygen sources lead to distinct ionic conductivities. The room-temperature ionic conductivities of Li2O-LIC and In2O3-LIC are 0.94 and 0.91 mS cm-1, respectively. Linear sweep voltammetry (LSV) reveals that the oxidation peak current of In2O3-LIC is approximately 27% lower than that of Li2O-LIC, indicating that its anodic decomposition is effectively suppressed. In addition, oxygen incorporation significantly mitigates the increase in interfacial resistance during the aging of sulfide/halide dual-electrolyte systems. Among them, the In2O3-LIC/Li5.5PS4.425O0.075Cl1.5 (LPSCO) interface exhibits superior interfacial stability compared with the pristine LIC/LPSCO system. Furthermore, all-solid-state batteries employing In2O3-LIC with a Li-In anode and a LiNi0.9Co0.05Mn0.05O2 cathode deliver superior rate capability and cycling stability compared with both pristine LIC and Li2O-LIC cells. At a charge/discharge rate of 2C(1C=200 mA·g-1), the In2O3-LIC cell delivers a discharge capacity of 138.7 mAh·g-1, which is significantly higher than those of the Li2O-LIC cell (119.9 mAh·g-1) and the pristine LIC cell (103.4 mAh·g-1). After 300 cycles, the In2O3-LIC cell retains 76% of its initial capacity, outperforming the Li2O-LIC (65%) and pristine LIC (63%) cells, further demonstrating its enhanced interfacial stability and electrochemical reversibility. Combined electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT) analyses reveal that the capacity fading mainly originates from the progressive degradation of both the sulfide/halide interface and the cathode/electrolyte interface. Overall, this work elucidates the critical role of oxygen-source selection in regulating the structure and interfacial behavior of halide solid electrolytes, providing a new strategy for designing high-performance all-solid-state batteries with enhanced interfacial stability.

Key words: halide solid electrolyte, oxygen-source engineering, interfacial stability, all-solid-state battery

CLC Number: