Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2006 , Vol. 21 >Issue 6: 1443 - 1448

DOI: https://doi.org/10.3724/SP.J.1077.2006.01443

Research Paper

Synthesis of BaSm 2 Ti 4 O 12 via Polymeric Precursor method

  • ZUO Ming-Wen ,
  • LI Wei ,
  • SHI Jian-Lin
Expand
  • Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China

Received date: 2005-12-27

  Revised date: 2006-03-07

  Online published: 2006-11-20

Fold

Abstract

A polymeric precursor method by using citric acid as the chelating agent was invesigated and single-phase and well-crystallized BaSm2Ti4O12 powder was synthesized at 1000℃ for 3h. As a comparison, an oxalate co-precipitation method was applied to synthesize BaSm2Ti4O12 powder, but 1300℃ was needed to get the pure BaSm2Ti4O12. The different phase behavior and reaction sequences are here believed to answer for the different calcining temperatures needed via these two wet chemical methods. In the co-precipitation method, when heating the precipitate, intermediate phase Sm2Ti2O7 reacts with BaTi4O9 and BaTiO3 to produce BaSm2Ti4O12, which is
similar to the solid-state route. As to the polymeric precursor route, however, BaTi2O5 intermediate phase produces during the thermal decomposition process, which results in totally different reaction sequences from the solid-state reaction mechanism, and promotes the formation of BaSm2Ti4O12 phase.

Key words： BaSm2Ti4O12; microwave ceramics; chemical synthesis; reaction mechanism

Cite this article

ZUO Ming-Wen , LI Wei , SHI Jian-Lin . Synthesis of BaSm 2 Ti 4 O 12 via Polymeric Precursor method[J]. Journal of Inorganic Materials, 2006 , 21(6) : 1443 -1448 . DOI: 10.3724/SP.J.1077.2006.01443

References

[1] Belous A G, Ovchar O V. J. Mater. Res., 2001, 16 (8): 2350--2356.
[2] Ohsato H, Ohhashi T, Kato H, et al. Jpn. J. Appl. Phys., 1995, 34 (1): 187--191.
[3] Chen D, Jiao X, Zhang M. Mater. Res. Bull., 2000, 35: 2101--2108.
[4] 杨群保, 李永祥, 殷庆瑞, 等(Yang Qun-Bao, et al). 无机材料学报(Journal of Inorganic Materials), 2002, 17 (6): 1135--1140.
[5] Weng M H, Liang T J, Huang C L. J. Eur. Ceram. Soc., 2002, 22: 1693--1698.
[6] 柯华, 许雪芹, 王文, 等(KE Hua, et al). 无机材料学报(Journal of Inorganic Materials), 2005, 20 (2): 373--378.
[7] Lee Y C, Liang M H, Hu C T, et al. J. Eur. Ceram. Soc., 2001, 21: 2755--2758.
[8] 潘庆谊, 徐甲强, 刘宏民, 等(PAN Qing-Yi, et al). 无机材料学报(Journal of Inorganic Materials), 1999, 14 (1): 83--89.
[9] Kakegawa K, Wakabayashi T, Sasaki Y. J. Am. Ceram. Soc., 1983, 69 (4): C82--C83.
[10] Yue Z X, Zhou J, Wang X H, et al. J. Eur. Ceram. Soc., 2003, 23: 189--193.
[11] Saha S K, Pathak A, Pramanik P. J. Mater. Sci. Lett., 1995, 14: 35.
[12] Xu Y B, Huang G H, He Y Y. Ceram. Int., 2005, 31: 21--25.
[13] Xu Y B, He Y Y. Ceram. Int., 2002, 28: 75--78.
[14] Hoffmann C, Waser R. Ferroelectrics., 1997, 201: 127--135.
[15] Dur an P, Capel F, Gutierrez D, et al. J. Mater. Chem., 2001, 11: 1828--1836.
[16] Dur an P, Capel F, Tartaj J, et al. J. Mater. Res., 2001, 16: 197--200.
[17] Xu Y B, Lu P X, Huang G H, et al. Mater. Chem. Phys., 2005, 92: 220--224.
[18] Dur an P, Gutierrez D, Tartaj J, et al. J. Eur. Ceram. Soc., 2002, 22: 797--807.
[19] Hennings D, Mayr W. J. Solid. State. Chem., 1978, 26: 329--338.
[20] Nyquist R A, Kagel R O. Infrared spectra of inorganic compounds, New York: Academic Press, 1971. 79.
[21] Liu T, Zhang Y H, Shao H Y, et al. Langmuir, 2003, 19: 7569--7572.
[22] Cheng P S, Yang C F, Chen Y C, et al. Ceram. Int., 2000, 26: 877--881.
[23] Xu Y B, Yuan X, Lu P X, et al. Mater. Chem. Phys., 2006, 96: 427--432.
[24] Pechini M P. United States Patent No. 3,330,697, 11 July 1967.
Options
Outlines

/

〈 〉