Journal of Inorganic Materials

• Research Paper • Previous Articles     Next Articles

Tunable Fabrication of TiO2 Nanotube Arrays with High Aspect Ratio
and its Application in Dye Sensitized Solar Cell

WU Cong-Cong, ZHUO Yan-Jun, ZHU Pei-Ning, CHI Bo, PU Jian, LI Jian   

  1. (School of Materials Science and Engineering, State Key Lab of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China)
  • Received:2008-12-17 Revised:2009-03-30 Published:2009-09-20 Online:2009-09-20

Abstract: TiO2 nanotube arrays were fabricated by anodization of titanium foils in the viscous nonaqueous electrolytes. Effects of anodization parameters on TiO2 nanotube were intensively studied. The photo-electrochemical property of dye sensitized solar cell (DSSC) based on TiO2 nanotube arrays was tested and the influence of TiO2 nanotube morphology on the performance of DSSC was investigated. The result indicates that the growth of TiO2 nanotube arrays with high aspect ratio depends highly on the nonaqueous solution which is enhanced by the applied potential and anodizing time. TiO2 nanotube arrays with aspect ratio up to 313.6 are fabricated in 0.5wt%NH4F in glycerol glycol at 50V for 17h. DSSC based on TiO2 nanotube arrays (fabricated in 0.5wt%NH4F in glycerol at 40V for 13h)exhibits an open circuit potential of 0.723V, 2.15mA/cm2 short circuit current density.

Key words: TiO2 nanotube arrays, high aspect ratio, dye sensitized solar cell

CLC Number: