Effects of Chromite Additive on the Microstructure and Performance of Bauxite-based Fracturing Proppant

doi:10.3724/SP.J.1077.2013.12689

Journal of Inorganic Materials ›› 2013, Vol. 28 ›› Issue (9): 1019-1024.DOI: 10.3724/SP.J.1077.2013.12689

• Research Paper • Previous Articles Next Articles

Effects of Chromite Additive on the Microstructure and Performance of Bauxite-based Fracturing Proppant

GAO Feng^1,2, WU Yao-Peng^1,2, LIU Jun^1,2, HE Hong-Wei^1,2, KANG Li-Tao^1,2, LIANG Wei^1,2

(1. College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China; 2. Key Laboratory of Interface Science and Engineering in Advance Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China)

Received:2012-11-14 Revised:2012-12-26 Published:2013-09-20 Online:2013-08-14
Supported by:
State Key Laboratory of Coal Conversion(09-102); China Postdoctoral Science Foundation(2012M52060); Special/Youth Foundation of Taiyuan University of Technology (2012L052)

Abstract

Abstract: High-strength fracturing proppant was prepared by pressureless sintering process using bauxite (67wt% Al₂O₃) and chromite as raw materials. The influence of chromite content (0-5wt%) on phase composition, microstructure and breakage ratio were studied by XRD, SEM, EDS and the column compression method, respectively. The results indicate that the additive of chromite promotes the formation of solid solution of chrome-corundum (Al_2-2xCr_2xO₃,0＜x＜1)and rod-shape mullite phases, both of which are believed to strengthen the fracturing proppant. Additionally, liquid phase is formed by excessive ferrum located between the ceramic grains at relatively high sintering temperatures, which is important for accelerating the sintering densification. The sintering temperature decreases with the addition of chromite. The optimized proppant sample with 2wt% chromite doped, sintered at 1420℃ for 2 h shows a breakage ratio of only 1.8% under the pressure of 69 MPa. Furthermore, 2 wt% chromite doping decreases the sintering temperature by 60℃ (from 1480℃ to 1420℃). This process enables the production of high-strength fracturing proppant from low-rank mineral materials and demonstrates a promising practical application.

Key words: bauxite, chromite, fracturing proppant, breakage ratio

CLC Number:

TQ174

GAO Feng, WU Yao-Peng, LIU Jun, HE Hong-Wei, KANG Li-Tao, LIANG Wei. Effects of Chromite Additive on the Microstructure and Performance of Bauxite-based Fracturing Proppant[J]. Journal of Inorganic Materials, 2013, 28(9): 1019-1024.

References

[1] Lee D S, Elsworth D, Yasuhara, et al. Experiment and modeling to evaluate the effects of proppant-pack diagenesis on fracture treatments. Journal of Petroleum Science and Engineering, 2010, 74(1/2): 67-76.

[2] Wen Q Z, Zhang S,Wang L, et al. The effect of proppant embedment upon the long-term conductivity of fractures. Journal of Petroleum Science and Engineering, 2007, 55(3/4): 221-227.

[3] Hammond P S. Setting and slumping in a Newtonian slurry, and implications for proppant placement. Chemical Engineering Science , 1995, 50(20): 3247-3260.

[4] Rickards A R, Brannon H D, Wood W D, et al. High Strength, Ultra-lightweight Proppant Lends New Dimensions to Hydraulic Fracturing Applications. Society of Petroleum Engineers, 2003: 1-4.

[5] Qi Z L ,Jiao G Y. Method to predict proppant flowback in fractured gas well. Procedia Environmental Sciences 2011: 325-332.

[6] WANG Cheng-Wang, MA Hong-Xing, LU Hong-Jun. Results analysis for ceramic proppant application in xifeng oilfield. Well Testing, 2005, 14(6): 31-33.

[7] LIU Yan-Yan, LIU Da-Wei, LIU Yong-Liang, et al. Study progresses of hydraulic fracturing technology. Drilling Fluid and Completion Fluid, 2010, 28(3): 75-78.

[8] MA Xue, YAO Xiao. Preparation and mechanisms of light-weight high-strength ceramisite proppant. Journal of Ceramics, 2008, 29(2): 91-95.

[9] 丁书强. 一种高密度高强度油气井压裂支撑剂及其制备方法. 中国: 102061159, 2011.05.18.

[10] Palamara Thomas C, Wilson Brett Allen. Methods for Producing Sintered Particles from a Slurry of an Alumina-containing Raw Material. US 2006/0219600 Al, 2006.10.05.

[11] GAO Hai-Li, YOU Tian-Cai, WU Hong-Xiang, et al. The development of high-strength oil hydraulic fraturing. Ceramics, 2006(10): 43-46.

[12] ZHAO Yan-Rong, WU BO-Lin, WU Ting-Ting. The development of high-alumina ceramic proppants. China Ceramics, 2010, 46(2): 46-49.

[13] Duenckel Robert, Edmunds Mark, Eldred Benjamin, et al. Sintered Spherical Pellets. USA: US 20100126728Al.2010.05.27.

[14] Han S C, Yoon D Y, Brun M K. Migration of grain boundaries in alumina induced by chromia addition. Acta Metall. Mater., 1995, 43(3): 977-984.

[15] Marcin C, Katarzyna P. Processing, microstructure and mechanical properties of Al2O3-Cr nanocomposites. Journal of European Ceramic Society, 2007, 27(2/3): 1273-1279.

[16] Hirata T, Akiyama K, Yamamoto h, et al. Sintering behavior of Cr2O3-Al2O3 ceramics. Journal of the European Ceramic Society, 2000, 20(2): 195-199.

[17] LIU E. The influence of the addition of chromium on wear resistance of the 95 chromium alumina ceramics. Ceramics, 2008(2): 37-40.

[18] WU Ai-Jun, Wang Hong-Xia, LI Huan-Niu, et al. Property and application of chrome-corundum brick. Refractories, 2001, 35(3): 165-166.

[19] Tartaj J, Messing G L. Anisotropic grain growth in α-Fe2O3-doped alumina. Journal of the European Ceramic Society, 1997, 17(5): 719-725.

[20] Tzing W H, Tuan W H. Exaggerated grain growth in Fe-doped Al2O3. Journal of Materials Science Letters, 1999, 18(14): 1115-1117.

[21] Tartaj J, Messing G L. Effect of the addition of Fe2O3 on the microstructural development of boehmite-derived alumina. Journal of Materials Science Letters, 1997, 16(2): 168-170.

[22] 中华人民共和国石油天然气行业标准SY/T 5108-2006. 压裂支撑剂性能及测试推荐方法.

[23] LI Zhi-Gang, YE Fang-Bao. Effects of chrome oxide on phase composition,microstructure and strength of zero cement corundum castables. Bulletin of the Chinese Ceramic Society, 2008, 27(1): 147-150.

[24] Partyka Janusz J. Wear resistance of crystals of corundum doped with Cr2O3, TiO2, and CoO. Journal of the European Ceramic Society, 1997, 17(13): 1592-1612.

[25] CAI-Shu, MENG JIA-Hong, YANG Zheng-Fang, et al. Fabrication and microstructure of cylindrical particles growing insituinmullite ceramics. Journal of the Chinese Ceramic Society, 1998, 26(2): 1-7.

[26] YANG Zhong-Zheng, YANG Dao-Yuan, ZHAO Shun-BO, et al. Phase transition of prepairing mullite materials with bauxite in heating process. Materials Review, 2010, 24(15): 502-505.

[27] 李家驹, 谬松兰, 马铁成, 等. 陶瓷工艺学. 北京: 中国轻工业出版社, 2005: 71-73.

[28] CUI Shu-Fen. Effect on ironoxide on mullite-corundum composites at redox atmosphere. Foreign Refractories, 1996, (2): 56-58.

[29] YAO Shu-Yu, CHEN Yun-Bo, CUI Hong-Zhi, et al. Influence of third component on preparing mullite fibers. Journal of Inorganic Materials, 2007, 22(3): 423-426.

[30] ZHAO Shi-Ke, HUANG Yong, Huang Xiao-Xian. Mullite formation mechanisms in reaction sintering of Al2O3/SiO2 containing mixed powders. Journal of Ceramics, 2002, 23(3): 149-155.

Effects of Chromite Additive on the Microstructure and Performance of Bauxite-based Fracturing Proppant

RichHTML

PDF (PC)

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments

[1]	WANG Song-Lin, FENG Yi, WANG Dong-Sheng, MENG Guang-Yao. Fabrication of Dense La_0.7Ca_0.3Cr_0.97O₃_−δ Interconnect Membrane on Novel SOFC Composite Support by Co-firing [J]. Journal of Inorganic Materials, 2012, 27(9): 911-916.
[2]	LIU Wei-Ming,LI Sheng-Li,LI Shi-Gang,WANG Xiao. Synthesis and Low-temperature Sintering Behavior of Sr-doped Lanthanum Chromite Powders [J]. Journal of Inorganic Materials, 2007, 22(6): 1061-1064.
[3]	YANG Yong-Jie,YANG Jian-Hua,TU Heng-Yong,LU Zhi--Yi,WEN Ting-Lian. Synthesis of La_1-xSr_^xCrO₃ Prepared by GNP and Its Property Study [J]. Journal of Inorganic Materials, 1999, 14(5): 739-744.