Journal of Inorganic Materials

• Research Letter •    

Laser-induced Construction of Graphitic-like Carbon Layers on Polyetheretherketone Surface and Antibacterial Effects

JIANG Shuaiqi1,2,3, TAN Ji1, LIU Xuanyong1,3   

  1. 1. State Key Laboratory of High Performance Ceramics, Chinese Academy of Sciences, Shanghai Institute of Ceramics, Shanghai 200050, China;
    2. Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China;
    3. School of Chemistry and Materials Science, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, China
  • Received:2026-04-11 Revised:2026-08-09
  • Contact: TAN Ji, associate professor. E-mail: tanji@mail.sic.ac.cn; LIU Xuanyong, professor. E-mail: xyliu@mail.sic.ac.cn
  • About author:JIANG Shuaiqi (1999–), male, Master candidate. E-mail: jiangshuaiqi23@mails.ucas.ac.cn
  • Supported by:
    “Pioneer” and “Leading Goose” R&D Program of Zhejiang (2024C03080)

Abstract: Polyetheretherketone (PEEK) has shown great potential for orthopedic implant applications. However, the lack of intrinsic antibacterial activity may lead to implant-associated infections and eventual implantation failure. Inorganic carbon materials such as graphene, graphene oxide, and graphitic carbon have shown antibacterial potential. Nevertheless, the fabrication of such carbonaceous structures on PEEK surfaces generally involves complex processing procedures. In this study, continuous laser engraving was used to modify PEEK surfaces and rapidly construct graphitic carbonized layers with distinct structural features. As the scanning speed decreased from 70 mm/s to 30 mm/s, the surface morphology evolved from a loose fibrous network to a well-defined ridge-groove architecture, while the surface chemistry changed from oxygen-containing groups (C-O and C=O) to defect-rich sp2-conjugated carbon. The modified surfaces exhibited improved hydrophilicity, good cytocompatibility, and supported cell adhesion and growth. The laser-induced carbonized layer inhibited bacterial adhesion and proliferation through its micro/nanostructures, exhibiting antibacterial rates of 81.59% against S. aureus and 40.46% against E. coli. Meanwhile, this carbonized layer possessed excellent near-infrared (NIR) photothermal conversion capability, enabling the antibacterial rates to be further enhanced to 100% and 87.64% upon NIR irradiation, thus achieving rapid and efficient photothermal synergistic antibacterial activity. This work provides a low-cost laser strategy for constructing graphitic carbonized layers on PEEK and offers insight into the regulation of surface structure and antibacterial biofunction.

Key words: polyetheretherketone, laser surface modification, graphitic-like carbon layer, photothermal effect, antibacterial effect

CLC Number: