[1] 徐南平. 面向应用过程的陶瓷膜材料设计、制备与应用. 北京: 科学出版社, 2005: 313–427.
[2] YANG C, ZHANG G, XU N, et al. Preparation and application in oil–water separation of ZrO2/α-Al2O3 MF membrane. J. Membr. Sci., 1998, 142(2): 235–243.
[3] LEE S H, CHUNG K C, SHIN M C, et al. Preparation of ceramic membrane and application to the crossflow microfiltration of soluble waste oil. Mater. Lett., 52(4/5): 266–271.
[4] XIA CHANG-RONG, GAO JIAN-FENG, PENG DING-KUN, et al. Preparation of yttria stabilized zirconia ultrafiltration membranes with inorganic precursors. J. Inorg. Mater., 2001, 16(1): 188–192.
[5] FUJII T, YANO T, NAKAMURA K, et al. The Sol–Gel preparation and characterization of nanoporous silica membrane with controlled pore size. J. Membr. Sci., 2001, 187(1/2): 171–180.
[6] LIU PEI-SHENG, LI TIE-FAN, FU CHAO, et al. Application of porous materials. Funct. Mater., 2001, 32(1): 12–15.
[7] 奚正平, 汤慧萍. 烧结金属多孔材料. 北京: 冶金工业出版社, 2009: 301–344.
[8] LI Z H, QIU N X, YANG G M. Effects of synthesis parameters on the microstructure and phase structure of porous 316L stainless steel supported TiO2 membranes. J. Membr. Sci., 2009, 326(2): 533–538.
[9] GESTEL T V, SEBOLD D, MEULENBERG W A, et al. Manufacturing of new nano-structured ceramic-metallic composite microporous membranes consisting of ZrO2, Al2O3, TiO2 and stainless steel. Solid State Ionics, 2008, 179(27/32): 1360–1366.
[10] MEULENBERG W A, MERTENS J, BRAM M, et al. Graded porous TiO2 membranes for microfiltration. J. Eur. Ceram., 2006, 26(4/5): 449–454.
[11] LI Z, BRAM M, BUCHKREMER H P, et al. Preparation of TiO2 composite microfiltration membranes by the wet powder spraying method. J. Membr. Sci., 2004, 244(1/2): 107–115.
[12] QIU MING-HUI, FENG JUN, FAN YI-QUN, et al. Stress analysis in the preparation of bi-layer membranes by co-sintering process. J. Inorg. Mater., 2009, 24(3): 617–622.
[13] ASTM F316-03. Standard test methods for pore size characteristics of membrane filters by bubble point and mean flow pore test. 2003.
[14] YU J, HU X, HUANG Y. A modification of the bubble-point method to determine the pore-mouth size distribution of porous materials. Sep. Pur. Tech., 2010, 70(3): 314–319.
[15] 黄 彦, 俞 健, 舒世立, 等. 一种多孔不锈钢—陶瓷复合膜的制备工艺. 中国, CN200810020318.0. 2008.02.29.
[16] FENG J, FAN Y, QI H, et al. Co-sintering synthesis of tubular bilayer α-alumina membrane. J. Membr. Sci., 2007, 288(1/2): 20–27.
[17] ZHANG HUI, GU YUN-FENG, WANG HUAN-TING, et al. Mechanism and kinetics of sintering process for α-Al2O3 microfiltration membranes. Chin. J. Mater. Res., 1999, 13(3): 249–254.
[18] ZHENG J M, REED J S. Effects of particle packing characteristics on solid-state sintering. J. Am. Ceram. Soc., 1989, 72(5): 810–817.
[19] 赵 静. Al2O3-ZrO2复合陶瓷微滤膜的制备及表征. 江苏: 南京工业大学硕士论文, 2006.
[20] WANG P, HUANG P, XU N, et al. Effects of sintering on properties of alumina microfiltration membranes. J. Membr. Sci., 1999, 155(2): 309–314. |