无机材料学报 ›› 2026, Vol. 41 ›› Issue (10): 1489-1496.DOI: 10.15541/jim20260010

• 研究论文 • 上一篇    下一篇

面向5G小型化环行器的低磁矩高介电常数Bi-YIG旋磁铁氧体设计与实现

赵建伟1,2(), 程泽来3, 梁吉3, 邱委华2, 苏桦3(), 李化义1()   

  1. 1 哈尔滨工业大学 卫星技术研究所, 哈尔滨 150080
    2 山东航天电子技术研究所, 烟台 264670
    3 电子科技大学 电子科学与工程学院, 成都 611731
  • 收稿日期:2026-01-09 修回日期:2026-02-15 出版日期:2026-10-20 网络出版日期:2026-05-08
  • 通讯作者: 李化义, 教授. E-mail: lihuayi@hit.edu.cn;
    苏 桦, 教授. E-mail: uestcsh77@163.com
  • 作者简介:赵建伟(1983-), 男, 硕士研究生. E-mail: 21B918143@stu.hit.edu.cn
  • 基金资助:
    四川省科技厅项目(2025ZHCG0019)

Design and Implementation of Bi-YIG Gyromagnetic Ferrites with Low Magnetic Moment and High Dielectric Constant for 5G Miniaturized Circulators

ZHAO Jianwei1,2(), CHENG Zelai3, LIANG Ji3, QIU Weihua2, SU Hua3(), LI Huayi1()   

  1. 1 Research Center of Satellite Technology, Harbin Institute of Technology, Harbin 150080, China
    2 Shandong Astronautics Electronic Technology Institute, Yantai 264670, China
    3 School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
  • Received:2026-01-09 Revised:2026-02-15 Published:2026-10-20 Online:2026-05-08
  • Contact: LI Huayi, professor. E-mail: lihuayi@hit.edu.cn;
    SU Hua, professor. E-mail: uestcsh77@163.com
  • About author:ZHAO Jianwei (1983-), male, Master candidate. E-mail: 21B918143@stu.hit.edu.cn
  • Supported by:
    Sichuan Science and Technology Program(2025ZHCG0019)

摘要:

随着5G通信对高集成度器件的需求日益增长, 开发兼具高介电常数与低饱和磁化强度的旋磁铁氧体成为研究关键。本研究旨在通过多离子协同取代策略, 设计并制备一种适用于3.0~3.6 GHz频段的石榴石铁氧体。采用固相反应法制备了Bi1.4Gd0.2Ca1.4Zr0.2AlnV0.6Fe4.2-nO12 (n=0~0.20)系列样品, 系统研究了Al3+取代对其微观结构、磁性能与介电性能的影响。所有样品均保持纯石榴石相, 无第二相产生, 微结构致密、均匀, 粒界清晰。当n=0.10时, 材料获得最佳综合性能: 饱和磁化强度(Saturation magnetization, 4πMs)降至774 G (1 G=10-4 T), 铁磁共振线宽(Ferromagnetic resonance linewidth, ΔH)优化至83 Oe (1 Oe=1000/4π A/m≈79.577 A/m), 介电常数(Dielectric constant, εr)达26.31, 介电损耗(Dielectric loss, tanδε)为8.49×10-4。基于此材料研制的双Y结环行器在3.0~3.6 GHz频段内的插入损耗为0.27~0.31 dB, 回波损耗与隔离度均优于20 dB, 且在-40~85 ℃宽温范围内性能保持稳定。Al3+取代通过稀释磁性离子与弱化磁晶各向异性, 协同降低了4πMs与ΔH。本工作为5G小型化环行器提供了一种高性能的铁氧体材料解决方案。

关键词: 旋磁铁氧体, 环行器, Bi-YIG, 低饱和磁化强度

Abstract:

With the increasing demand for highly integrated devices in 5G communication, the development of gyromagnetic ferrites combining high dielectric constant and low saturation magnetization has become a research focus. This study aims to design and prepare a garnet ferrite suitable for the 3.0-3.6 GHz band through a multi-ion co-substitution strategy. A series of Bi1.4Gd0.2Ca1.4Zr0.2AlnV0.6Fe4.2-nO12 (n=0-0.20) samples were synthesized by the solid-state reaction method. The effects of Al3+ substitution on the microstructure, magnetic properties, and dielectric properties were systematically investigated. All samples maintain a pure garnet phase without secondary phases. Dense and uniform microstructures with clear grain boundaries are observed. The results show that the optimal comprehensive performance is achieved at n=0.10: the saturation magnetization (4πMs) is significantly reduced to 774 G (1 G=10-4 T), the ferromagnetic resonance linewidth (ΔH) is optimized to 83 Oe (1 Oe=1000/4π A/m≈ 79.577 A/m), the dielectric constant (εr) reaches 26.31, and the dielectric loss (tanδε) is as low as 8.49×10-4. A dual-Y-junction circulator fabricated based on this optimized material exhibits excellent microwave performance within the 3.0-3.6 GHz band, with an insertion loss of 0.27 to 0.31 dB, return loss and isolation both better than 20 dB. Moreover, the device demonstrates stable performance over a wide temperature range from -40 ℃ to 85 ℃, indicating its reliability for practical engineering applications. The Al3+ substitution synergistically reduces both 4πMs and ΔH by diluting magnetic ions and weakening magnetocrystalline anisotropy. This work provides a high-performance ferrite material solution for miniaturized 5G circulators and contributes to the advancement of integrated microwave devices for next-generation communication systems.

Key words: gyromagnetic ferrite, circulator, Bi-YIG, low saturation magnetization

中图分类号: