反应烧结制备AlON透明陶瓷

doi:10.3724/SP.J.1077.2011.00499

无机材料学报 ›› 2011, Vol. 26 ›› Issue (5): 499-502.DOI: 10.3724/SP.J.1077.2011.00499 CSTR: 32189.14.SP.J.1077.2011.00499

反应烧结制备AlON透明陶瓷

袁贤阳^1,2, 张芳², 刘学建², 张昭², 王士维²

(1. 中国科学院研究生院, 北京100864; 2. 中国科学院上海硅酸盐研究所, 上海200050)

收稿日期:2010-06-29 修回日期:2010-10-26 出版日期:2011-05-20 网络出版日期:2011-06-07
作者简介:袁贤阳(1982-), 男, 博士研究生. E-mail: yxyang@mail.sic.ac.cn
基金资助:
国家自然科学青年基金 (50802106)

Fabrication of Transparent AlON Ceramics by Solid-state Reaction Sintering

YUAN Xian-Yang^1,2, ZHANG Fang², LIU Xue-Jian², ZHANG-Zhao², WANG Shi-Wei²

(1. Graduate University of Chinese Academy of Sciences, Beijing 100864, China; 2. Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China)

Received:2010-06-29 Revised:2010-10-26 Published:2011-05-20 Online:2011-06-07
Supported by:
National Natural Science Foundation of China (50802106)

摘要/Abstract

摘要： γ-AlON透明陶瓷具有优良的光学和力学性能, 可望代替蓝宝石单晶用做红外窗口和透明装甲. 采用反应烧结法制备AlON透明陶瓷, 探索了烧结助剂以及保温时间对AlON陶瓷致密化的影响. 通过X射线衍射和扫描电镜分析了陶瓷烧结体的物相及显微结构, 利用分光光度计测试了透明陶瓷的直线透过率. 结果表明: 和单掺的MgO或Y₂O₃相比, 以MgO和Y₂O₃共掺作为烧结助剂能够更好地促进AlON的致密化. 在保持Y₂O₃添加量为0.08wt%的情况下, 样品的透过率随着MgO添加量的增加而明显提高. 添加0.08 wt% Y₂O₃+1wt% MgO作为烧结助剂的样品在1950℃保温12h后透过率(600nm处)达到约60%.

关键词: 反应烧结, AlON, MgO, Y₂O₃

Abstract: Transparent AlON ceramic which exhibit excellent optical and mechanical properties is a potential alternative to sapphire for the application of IR windows and armor. In this work, transparent AlON ceramics were successfully prepared by solid-state reaction sintering. The effects of sintering aids and holding time on densification of AlON ceramics were investigated. The phase composition and microstructure of the ceramics were characterized by XRD and SEM, respectively. In-line transmittance of the ceramics was measured by spectrophotometer. The results show that co-doping of MgO and Y₂O₃ as sintering aid is more effective to enhance densification of AlON ceramics than the doping of MgO or Y₂O₃. With doping level of 0.08wt%Y₂O₃, the transmission of ceramics increases with the increase of MgO content. Co-doped with 0.08 wt% Y₂O₃and 1wt% MgO, the ceramics (1mm thick) sintered at 1950℃ for 12h in N2 atmosphere have an in-line transmission of 60% (at 600nm).

Key words: solid-state reaction sintering, AlON, MgO, Y₂O₃

中图分类号:

TQ174

袁贤阳, 张芳, 刘学建, 张昭, 王士维. 反应烧结制备AlON透明陶瓷[J]. 无机材料学报, 2011, 26(5): 499-502.

YUAN Xian-Yang, ZHANG Fang, LIU Xue-Jian, ZHANG-Zhao, WANG Shi-Wei. Fabrication of Transparent AlON Ceramics by Solid-state Reaction Sintering[J]. Journal of Inorganic Materials, 2011, 26(5): 499-502.

参考文献

[1] Hartnett T M, Bernstein S D, Maguire E A, et al. Optical properties of AlON (aluminum oxynitride). Infrared Physics & Technology, 1998, 39(4): 203-211.

[2] Hartnett T M, Gentilman R L, Maguire E A. Aluminum oxynitride having improved optical characteristics and method of manufacture. US Patent, 4481300. 1984.

[3] Gentilman R L, Maguire E A, Dolhert L E. Transparent Aluminum Oxynitride and Method of Manufacture. US Patent, 4720362. 1988.

[4] Willems H X, Hendrix M M R M, Metselaar R, et al. Thermodynamics of AlON I: stability at lower temperatures. J. Eur. Ceram. Soc., 1992, 10(4): 327-337.

[5] Willems H X, Hendrix M M R M, With G de, et al. Thermodynamics of AlON II: Phase relations. J. Eur. Ceram. Soc., 1992, 10(4): 339-346.

[6] Li Y W. Preparation of aluminium oxynitride by carbothermal reduction of aluminium oxide in a flowing N2 atmosphere. China's Refractories, 1996, 5(1): 24-29.

[7] Mccauley J W, Corbin N D. Phase-relations and reaction sintering of transparent cubic aluminum oxynitride spinel (AlON). J. Am. Ceram. Soc., 1979, 62(9/10): 476-479.

[8] 裴新美. AlON陶瓷的制备及性能. 武汉理工大学学报, 2001, 23(7): 8-10.

[9] Wang X, Li W, Seetharaman S. Thermodynamic study and synthesis of gamma-aluminum oxynitride. Scandinavian Journal of Metallurgy, 2002, 31(1): 1-6.

[10] Rhamdhani M A S, Soepriyanto S, Ramelan A, et al. Determination of sintering mechanism and grain growth kinetics of MgO-doped Al2O3. Journal JTM, 2005, 12(3): 148-158.

[11] Fujii A K I T. Production of Light-transmissive Sintered Aluminum Oxynitride. JP Patent, 3-126674. 1991.

[12] Medraj M, Hammond R, Root J, et al. The equilibria in the AlN-Al2O3-Y2O3 system-thermodynamics and neutron diffraction. Applied Physics A: Materials Science & Processing, 2002, 74(S1): 1188-1191.

[1]	马文, 申喆, 刘琪, 高元明, 白玉, 李荣星. 悬浮液等离子喷涂制备Y₂O₃涂层及耐等离子刻蚀性[J]. 无机材料学报, 2024, 39(8): 929-936.
[2]	刘焱, 覃显鹏, 甘霖, 周国红, 章天金, 王士维, 陈鹤拓. 亚微米球形Y₂O₃粉体及其透明陶瓷的制备[J]. 无机材料学报, 2024, 39(6): 691-696.
[3]	郑雅雯, 张翠萍, 张瑞杰, 夏乾, 茹红强. 硼酸碳热还原-渗硅反应烧结制备碳化硼陶瓷复合材料[J]. 无机材料学报, 2024, 39(6): 707-714.
[4]	张超逸, 唐慧丽, 李宪珂, 王庆国, 罗平, 吴锋, 张晨波, 薛艳艳, 徐军, 韩建峰, 逯占文. 新型GaN与ZnO衬底ScAlMgO₄晶体的研究进展[J]. 无机材料学报, 2023, 38(3): 228-242.
[5]	靳喜海, 董满江, 阚艳梅, 梁波, 董绍明. 透明AlON陶瓷凝胶浇注成型及其无压烧结制备[J]. 无机材料学报, 2023, 38(2): 193-198.
[6]	汪德文, 王俊平, 袁厚呈, 刘章, 周进, 邓佳杰, 王鑫, 吴贲华, 章健, 王士维. 真空反应烧结制备米级尺寸钇铝石榴石(YAG)透明陶瓷[J]. 无机材料学报, 2023, 38(12): 1483-1484.
[7]	吴松泽, 周洋, 李润丰, 刘晓倩, 李翠伟, 黄振莺. 铁尾矿及其反应烧结多孔陶瓷的制备与性能研究[J]. 无机材料学报, 2023, 38(10): 1193-1199.
[8]	陆晨辉, 葛万银, 宋盼盼, 张盼锋, 徐美美, 张伟. 用于白光LED稀土Eu掺杂SiAlON基荧光粉的发光性能[J]. 无机材料学报, 2023, 38(1): 97-104.
[9]	满鑫, 吴南, 张牧, 贺红亮, 孙旭东, 李晓东. Lu₂O₃-MgO纳米粉体合成及其复相红外透明陶瓷制备[J]. 无机材料学报, 2021, 36(12): 1263-1269.
[10]	王晴晴,石云,冯亚刚,刘欣,陈昊鸿,谢腾飞,李江. 高光学质量Yb:YAG透明陶瓷的制备及激光参数研究[J]. 无机材料学报, 2020, 35(2): 205-210.
[11]	孟祥玮,吴西士,裴兵兵,朱云洲,黄政仁. 短碳纤维增强碳化硅基复合材料的制备与力学性能[J]. 无机材料学报, 2019, 34(9): 1015-1020.
[12]	郭胜强, 王皓, 涂兵田, 王斌, 徐鹏宇, 王为民, 傅正义. 细晶MgO·1.44Al₂O₃透明陶瓷的制备及其性能研究[J]. 无机材料学报, 2019, 34(10): 1067-1071.
[13]	程国峰, 阮音捷, 孙玥, 尹晗迪, 解其云. 元素配比对BiFeO₃反应烧结相变影响的高温X射线衍射研究[J]. 无机材料学报, 2019, 34(10): 1035-1040.
[14]	张舟, 王皓, 涂兵田, 徐鹏宇, 王为民, 傅正义. Mg_0.27Al_2.58O_3.73N_0.27透明陶瓷机械性能评价[J]. 无机材料学报, 2018, 33(9): 1006-1010.
[15]	王诗阳, 傅宇东, 陈磊, 王玉金. W-Y₂O₃复合材料和梯度材料的制备及力学性能[J]. 无机材料学报, 2018, 33(6): 596-602.

反应烧结制备AlON透明陶瓷

Fabrication of Transparent AlON Ceramics by Solid-state Reaction Sintering

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价