Research Paper

Hydrothermal and Solvothermal Preparation of Nanocrystalline KTN Powders

  • ZHONG Zhi-Cheng ,
  • ZHANG Duan-Ming ,
  • HAN Xiang-yun ,
  • WEI Nian ,
  • YANG Feng-Xia ,
  • ZHENG Ke-Yu
Expand
  • 1. Department of Physics, Huazhong University of Science and Technology, Wuhan 430074 China;2. Laboratory of Thin Film & Electrics, Xiangfan University, Xiangfan 441053, China; 3. Hubei Ferroelectric and Piezoelectric Materials and Devices Key Laboratory, Hubei University, Wuhan 430062, China

Received date: 2006-03-22

  Revised date: 2006-07-21

  Online published: 2007-01-20

Abstract

By using Nb2O5 and Ta2O5 as precursors, nanocrystalline potassium tantalite niobate KTa0.6Nb0.4O3 (KTN) powders were prepared by hydrothermal and solvothermal (isopropyl alcohol) synthesis processing. The relations of crystal structure and the synthesis conditions of KTN powders were investigated. All results of measurement on samples obtained demonstrate that the microstructure and morphology of nanocrystal powders depend on the reaction temperature, pressure and pH values of solvents. The reaction solvents are very important factors. The KTN with pyrochlore structure fabricated by the hydrothermal method shows although the amounts of pyrochlore phase in samples decrease gradually as the pH values of solvents increasing, pure perovskite phase will be gained first and last. KTN ceramic powders with perovskite structure were successfully synthesized via solvothermal processing with 1--2mol/L of KOH at 523K for 8h. The SEM images of powders show that the shape of particles is mainly cubic and the size of particles is 30--50nm.

Cite this article

ZHONG Zhi-Cheng , ZHANG Duan-Ming , HAN Xiang-yun , WEI Nian , YANG Feng-Xia , ZHENG Ke-Yu . Hydrothermal and Solvothermal Preparation of Nanocrystalline KTN Powders[J]. Journal of Inorganic Materials, 2007 , 22(1) : 45 -48 . DOI: 10.3724/SP.J.1077.2007.00045

References

[1] Triebwasser S. Phys. Rev., 1959, 114: 63--68.
[2] Geusic J E, Kurtz S K, et al. Appl. Phys. Lett., 1964, 4(8): 141.
[3] Chen F S, Geusic J E, Kurtz S K, et al. J. Appl. Phys., 1966, 37(1): 388.
[4] Linde D, Glass A M, Rodgers K F. Appl. Phys. Lett., 1975, 26(1): 22--24.
[5] Debily P E, Gunter P, Arend H. Ceramic Bulletin, 1979, 58(6): 606--609.
[6] Sashital S R, Krishnakumar S, Esener S. Appl. Phys. Lett., 1993, 62(23): 2917--2920.
[7] Zhang D M, Li Z H, et al. Am. Ceramic. Soc. Bull., 2001, 2: 57--61.
[8] 王世敏, 张端明, 等(Wang S M, et al).无机材料学报(Journal of Inorganic Materials), 1997, 16(2): 819--823.
[9] 王晓东, 张端明, 等(Wang S M, et al).无机材料学报(Journal of Inorganic Materials), 2005, 20(5): 819--823.
[10] Dawson W J. Am, Ceram. Soc. Bull., 1988, 67: 1673--1678.
[11] Li W J, Shi E W, et al. J. China Ceram. Soc., 1999, 27 (6): 714--719.
[12] Kanai H, Harada K, Yamashita Y, et al. Jpn. J. Appl. Phys., 1996, 35: 5122--5125.
[13] Lu C H. Materials Letters, 1998, 34(3): 172--176.
[14] 张建荣, 高濂(Zhang J R, et al). 无机材料学报(Journal of Inorganic Materials), 2004, 19(5): 1178--1180.
[15] Suyal G, Colla E, et al. Nano Letters, 2004 4(7): 1339--1342.
[16] Kuang A X, Lu C J, Huang G Y, et al. Journal of Crystal Growth, 1995, 194: 80--86.
[17] Andrade J S, Pinheiro A G, et al. J. Phys.: Condens. Matter., 1999, (11): 4451--4460.
[18] 顾豪爽, 陈沛智, 等. 湖北大学学报, 1995, 17(1): 78--81.
[19] 王中林主编, 曹茂盛等译. 纳米材料表征. 北京: 化学工业出版社, 2005.

Outlines

/